Additives Chemical Properties, Suppliers, Manufacturers - Worldofchemicals.com

Additives

REOGEN E

REOGEN E is an all-purpose liquid plasticizer and processing aid for all elastomers. It is a improved Mooney, no reversion, versatile, improved flow little or no effect on physical properties. It is based on a mixture of high molecular weight sulfonic acid and low viscosity mineral oil.

Properties Suppliers
Deoflow Z

Deoflow Z is a universial processing additive for rubber compounds based on EPDM, NR, SBR and CR, in which zinc-containing processing additives could cause interferences, as well as for complex mouldings. It acts as lubricant and dispersing agent. It improves the flow properties of the compounds and the release of the vulcanizates.

Properties Suppliers
Deogum 194

Deogum 194 is a processing additive for special elastomers. It facilitates the processing of special elastomers such as HNBR, ACM or ECO. Flow properties and mold-filling are improved by reduced mooney-viscosity. Deogum 194 optimizes the processing and release properties of the compound on the mixing devices as well as in the downstream processes.

Properties Suppliers
Freesil622

US FDA approved silicon free defoarmer and dewebber used in the manufaturing of latex products.

Suppliers
STRUKTOL A 50

STRUKTOL A 50 is a series of process additives for natural and synthetic rubber. These zinc salts have proven effective over the years as physical peptizers for natural rubber. Since the available double bonds act to stabilize free radical formation, products such as STRUKTOL A 50 improve reversion resistance and produce vulcanizates which display greater resilience and tear strength. Because of the higher level of solubility, it can be used without fear of bloom or adverse effect on rubber to metal or rubber-to-rubber adhesion.

Properties Suppliers
Ultra-Pep 148

Ultra-Pep 148 is a chemical peptizer for natural rubber based on DBD and extremely effective at low dosage levels. It is evnvironmentally friendly due to its dust-free appearance. The low melting point of the carrier material ensures a fast, easy incorporation, even at lower mastication temperatures.

Properties Suppliers
Zinc Stearate

Zinc stearate is a "zinc soap" that is widely used industrially. In this context, soap is used in its formal sense, a metal "salt" of a fatty acid. It is a white solid that repels water. It is insoluble in polar solvents such as alcohol and ether but soluble in aromatic hydrocarbons (e.g., benzene) and chlorinated hydrocarbons when heated. It is the most powerful mold release agent among all metal soaps. It contains no electrolyte and has a hydrophobic effect. Its main application areas are the plastics and rubber industry, where it is used as a releasing agent and lubricant which can be easily incorporated.

Suppliers
DAIFREE FB-961

DAIFREE FB-961 is fluorocarbon internal mold release agent/additive for rubber materials. It will be suitable for FKM or other rubber materials. It will give releasing performance, kneading activity, non-adhesibility and low frictional properties.

Properties Suppliers
DAIFREE FB-962

DAIFREE FB-962 is fluorocarbon internal mold release agent/additive for rubber materials. It will be suitable for FKM or other rubber materials. It will give releasing performance, kneading activity, non-adhesibility and low frictional properties.

Properties Suppliers
STRUKTOL HP 55

STRUKTOL HP 55 is a high performance process additive developed for the rubber industry. Benefits have been shown in the tire industry, particularly where solution SBR and NR are being used. Processing benefits are seen without adverse effects on dynamic properties. This leads to potential application in other tire and non-tire applications. It offers improved mixing and milling characteristics, hot tear and reversion resistance are directionally improved. Other benefits include viscosity reduction and improved flow properties.

Properties Suppliers

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X