Buy Adhesives| manufacturers | suppliers | wholesales | traders | exporters


N,N-Dimethylformamide Industrial Grade

N,N-Dimethylformamide/ DMF is used in the production of acrylic fibers and plastics. It is also used as a solvent in peptide coupling for pharmaceuticals, in the development and production of pesticides, and in the manufacture of adhesives, synthetic leathers, fibers, films, and surface coatings.

MIX2FIX Bronze

MIX2FIX Bronze is a general-purpose, bronze-colored, non-corroding, two-component epoxy industrial repair paste for tough, permanent repairs to bronze and other non-ferrous metals, ceramics, porcelain, concrete, wood and some hard plastics. The benefit is that it provides good adhesion to a variety of metals, ceramics and hard plastics. It spreads easily and fills large and small gaps on both horizontal and vertical surfaces.

Properties Suppliers
Cobalt Chloride

Speciality Chemicals


MIX2FIX FC Steel is a fast-curing, general-purpose, two-part epoxy paste with a high steel-particle content. It can be used to make tough, permanent repairs that will be rust-free and can be machined like steel. It spreads easily to fill large and small gaps on both horizontal and vertical surfaces. To achieve optimum adhesion, clean surfaces using a solvent wipe. It provides good adhesion to a variety of metals, ceramics and hard plastics.

Properties Suppliers
MIX2FIX GP Aluminum

MIX2FIX GP Aluminum is a general-purpose, two-part epoxy paste containing a high content of aluminum particles to make tough, permanent repairs to metal, ceramics, concrete, wood and some hard plastics. It spreads and applies easily to fill large and small gaps on both horizontal and vertical surfaces. It is not intended for structural applications.

Properties Suppliers
MIX2FIX GP Gel Adhesive

MIX2FIX GP Gel Adhesive is a two-component, non-sag, epoxy adhesive/repair paste. It is 100% solids, contains no solvents and is extremely easy to mix and apply. This product incorporates a blue dye, which becomes clear when the components are correctly mixed. It bonds well to most surfaces, and in 24 hours forms a tough bond to a wide variety of substrates, including wood, steel, aluminum, cast iron, fiberglass/GRP, concrete, stone, china, copper and unglazed ceramic.

Properties Suppliers
MIX2FIX FC Gray Adhesive

MIX2FIX FC Gray Adhesive is a low-odor, two-component, modified epoxy adhesive that cures rapidly at room temperature with exceptional tensile adhesion and peel strength to bond wood, metal, fiberglass, glass, ceramics and many hard plastics. The benefits are it contains no volatile solvents, it does not shrink upon curing, it has excellent adhesion to a wide variety of substrates and provides fast curing.

Properties Suppliers
Tetraethyl orthosilicate

Tetraethyl orthosilicate 78-10-4

sodium diacetate FOOD GRADE 99%

Sodium diacetate 
Product Name: Sodium diacetate 
Chemical Formula: C4H7O4Na+xH2O 
CAS#: 126-96-5 
White crystal with acetic acid odor; 
Easy to absorb moisture; 
Very easy to dissolve in the water; 
To decompose when heated to higher than 150 
Application: In the food additive extensively (for instance, toasts food, candy, fat, meat products), use as even to take pharmaceutical, buffer, rust inhibitor and reply and worthy of and defend mould main batching of pharmaceutical, etc. 
Package: 25kg/bag 
Free acetic acid's 39.00-41.00 39.8 
Sodium Acetate(Ch3COONa)% 58.00-60.00 58.8 
Moisture ≤ % 2.00 0.60 
PH(10% aqueous solution) 4.50-5.00 4.7 
Formic acid and Matters easy to oxidize%≤ 0.20 <0.20 
Arsenic(As)≤ 0.0003 <0.0003 
Heavy Metal(as Pb)% 0.001 <0.001 

4a zeolite technical LAB GRADE 99

A molecular sieve is a material with pores (very small holes) of uniform size. These pore diameters are similar in size to small molecules, and thus large molecules cannot enter or be adsorbed, while smaller molecules can. As a mixture of molecules migrate through the stationary bed of porous, semi-solid substance referred to as a sieve (or matrix), the components of highest molecular weight (which are unable to pass into the molecular pores) leave the bed first, followed by successively smaller molecules. Some molecular sieves are used in chromatography, a separation technique that sorts molecules based on their size. Other molecular sieves are used as desiccants (some examples include activated charcoal and silica gel).


12 uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X