Admixtures suppliers, manufacturers, exporters -



ARI MRA 1 mould releasing Agent with built in corrosion inhibitor for steel shuttering and formwork. It is manufactured from refined speciality oils and blended additives, the product forms a water-resistant chemical barrier with the alkalies in concrete. It has to be applied as is without any dilution.ARI MRA 1 contains excellent concrete surface texture.

Properties Suppliers

ARI MRA 2 is a concentrated mould release agent. Smooth demoulding of concrete provides many advantages in the concrete work practice. The product is specially designed so as to offer such advantages and prolong the life of shuttering.ARI MRA 2 is very economical to use,dilutable with water and no need for diesel oil.

Properties Suppliers

ARI MRA 3 is a concentrated solution made for use on metal formwork used by the construction industry. It is a clear brownish liquid meant for quick removal of "stuck on" old concrete.ARI MRA 3 dissolves the concrete saving on manual labour,restores original smooth finish to the formwork.ARI MRA 3 can be repeatedly applied by brush on the formwork, without dilution, so as to keep the surface wet for atleast 2-3 hours.

Properties Suppliers
Cebex 100

Cebex 100 is a powder admixture. The material is a combination of a plasticising agent and a gas producing expansion medium. The plasticising agent allows the use of a reduced water/cement ratio with consequent increased strengths and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion. It gives high grout fluidity with low water/cement ratio, thus making placement or injection of the grout easy.

Properties Suppliers

ARI RUSCON is a chemical solution, which reacts with rust and converts the same into an insoluble grayish black coating. This coating protects the metal from further rusting and provides a base for application of protective paint coating. ARI RUSCON rust converter for use on structures and re-bar prior to repair. It onverts rust immediately into a protective coating.

Properties Suppliers
ConcCare AE

ConcCare AE air entraining admixture/Foaming agent, produces freeze/thaw resistant concrete, smooth workable lean concretes and cellular light weight concretes for several applications like heat insulation works.

Properties Suppliers
ConcCare RP

ConcCare RP is water Reducing/Retarding Admixture, used for production of durable concrete with high mechanical properties, low permeability and high resistance to chemical and physical attack.

Properties Suppliers

ARI BLOCKAID additive for cement concrete blocks. ARI BLOCKAID improves the workability and compaction characteristics of cement mixes used for manufacturing blocks. It increases strength of blocks,prevents shrinkage cracks.

Properties Suppliers
ConcCare SPW

ConcCare SPW is super Plasticizers/Retarding Admixture, used for production of durable concrete with high mechanical properties, low permeability and high resistance to chemical and physical attack.

Properties Suppliers
Conplast AEA

Conplast AEA is a chloride free air entraining admixture based on neutralised vinson resin. It is supplied as a translucent water white coloured solution which instantly disperses in water. It acts at the interface between the mixing water and cement/aggregate particles to produce microscopic air bubbles, which are evenly distributed throughout the concrete. The entrained air enhances durability by providing protection against the rapid temperature changes found in freezing and thawing conditions and with the use of de-icing salts. Air entrainment increases the resistance of concrete to attack by frost and de-icing salts, reducing problems of surface scaling and concrete failure.

Properties Suppliers uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X