Industrial coating chemicals | plastic coating chemicals | specialty coating

Coatings

Conpro WR

Conpro WR is silicone based, single component, colourless clear liquid coating that penetrates into open pores into mineral substrates and make it water repellant. It prevent water penetration, has good permeability to water vapour thus allow the masonary surface to breathe naturally. It is used to protect vertical exterior surfaces like concrete, natural stones, artificial stones, clay bricks, cementitious plaster, cement paint coated surfaces etc. against driving rain and frost with improvement in self cleaning properties.

Properties Suppliers
Acetic acid

Acetic acid

Conpro EP-1

Conpro EP-1 is a coating system recommended for cement bound surfaces like concrete, screed and plaster. It can also be used over iron and steel. It is a solvent free, pigmented, two component system consisting of liquid epoxy resins and specially formulated hardener. In cured condition, Conpro EP-1 is a hard, tough and abrasion resistant epoxy flooring. It is resistant to a wide range of chemicals including many acids (inorganic), alkalies, mineral oils, solvents etc. It also has excellent resistance to water.

Properties Suppliers
Conpro EP-7

Conpro EP-7 is a solvent free, pigmented, two component, epoxy based coating specially formulated for substrates coming in contact with food and edible-products. In cured condition, it is hard, tough, abrasion resistant material. It is resistant to wide range of chemicals including many acids, alkalies, minerals oils, solvents etc. It also has excellent resistance to water and many chemicals used for food processing. It is a coating system recommended for use over cement bound surfaces like concrete, screed and plaster. It can also be applied over iron and steel.

Properties Suppliers
Kemicryl HR

Kemicryl HR is an Acrylic Lacquers and polymer coating for glossy hard finish for cement tiles & paver blocks. Kemicryl HR scores over its competitors in two main aspects. One being it is having minimum 20% extra gloss than ordinary coatings andat teh same time because of its fine nature, it gives a coverage of at least 30-40% extra over ordinary lacquers.

Properties Suppliers
COTPOL 110 W

COTPOL 110 W is a ready-for-use, water based, zircon coating. It is suitable for use on most sand binder backgrounds and for almost all metals cast, including critical jobs in cast iron and steel. Compared to conventional dressings, COTPOL 110 W has superior application characteristics and gives an improved casting surface finish. It is ready-for-use and has the optimum properties needed to develop a well-covered and bonded refractory layer with the correct degree of sand penetration.

Properties Suppliers
COTPOL EP256

COTPOL EP256 is a ready-for-use flammable zircon coating having excellent suspension and covering properties. It is suitable for use ongreen sand, CO2 set and resin bonded sand moulds/cores, and for casting almost all metals including critical jobs in heavy cast iron and steel foundries. COTPOL EP256 is also effective on all grades of iron, copper and nickel based composition and light alloys in green sand, sodium silicate and resin bonded moulds.

Properties Suppliers
Conpro EP-21

Conpro EP-21 is a solvent free, pigmented two component, epoxy based coating specially for steel and concrete. In cured condition, it is hard, tough, abrasion resistant material. It is resistant to wide range of chemicals including many acids, alkalies, minerals oils, solvents etc. It also has excellent resistance to water and many chemicals used in sugar, breweries, distilleries, fertilizer and chemical industries. Its application includes coating over containers, reactors in which chemicals of recommended concentrations is stored. It may also be used for coating structures.

Properties Suppliers
PERFECTACOTE

PERFECTACOTE is a series of special developed high quality potato based coating binder and is available in a wide range of viscosity levels with outstanding rheological behaviour under all circumstances. It allow high starch containing coating formulas with a binding power that easily matches synthetic binders. The carboxylated character ensures good retainability resulting in a minimal impact on the starch load.

Properties Suppliers
COTPOL MA31RM

COTPOL MA31RM is a ready-for-use IPA based magnesite coating having excellent suspension and covering properties. It is suitable for use on green sand, CO2 set and resin bonded sand moulds/cores, and for casting Manganese Steel. It offers good casting finish, free from burn-on and metal mould penetration to reduce fettling costs and improve productivity. It can be easily remixed and applied due to its excellent suspension characteristics.

Properties Suppliers

12345...14
www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X