Chemical Collectors - suppliers, manufacturers, exporters

Collectors

AERO

AERO collectors (promoters) are used extensively for the flotation of sulfide minerals including copper, gold, lead, zinc, nickel, iron, and many others that provide improved performance, higher selectivity than more traditional sulfide collectors and better overall metallurgical performance.

Properties Suppliers
AEROFLOAT

AEROFLOAT collectors (promoters) are used extensively for the flotation of sulfide minerals including copper, gold, lead, zinc, nickel, iron, and many others that provide improved performance, higher selectivity than more traditional sulfide collectors and better overall metallurgical performance.

Properties Suppliers
AEROPHINE

AEROPHINE collectors (promoters) are used extensively for the flotation of sulfide minerals including copper, gold, lead, zinc, nickel, iron, and many others that provide improved performance, higher selectivity than more traditional sulfide collectors and better overall metallurgical performance.

Properties Suppliers
Florrea SEX

Florrea SEX is a mining flotation collector and it is a light yellow or grey yellow free flowing powder or pellet and soluble in water. Sodium ethyl xanthate decompose easily when meeting acid and heat. It is a xanthate based on the C2 alkyl ethyl alcohol in the sodium salt form.

Properties Suppliers
Florrea 2345

Florrea 2345 are water solubles excellent copper collectors in acid circuits and in LPF circuits. They are also effective collector at all pH ranges for improving gold recovery. Selective against iron sulfides.

Properties Suppliers
Florrea 2702

Florrea 2702 is used as collector for precious and base-metal ores such as Cu, Ni and Zn. Excellent for bulk flotation of poly-metallic ores and pyritic gold ores in acid circuits.

Properties Suppliers
Danafloat 067

Danafloat 067 is a water soluble salt of aryl dithiophosphoric acid. It has a light frothing characteristic and is especially useful where a fast, selective and active collector is required and no conditioning of the collector with pulp is possible. The dosage of Danafloat 067 is wide and varies with the type of ore, usually falling within the range of 10 to 100 grams per metric ton ore. It can be added undiluted or preferably diluted with clear water to 5-20 % solutions.

Properties Suppliers
Danafloat 068

Danafloat 068 offers good selectivity against pyrite in sulfide flotation and can provide good to excellent flotation response to various copper minerals, including but not exclusively, chalcopyrite, bornite, chalcocite and covellite. Other applications are in the flotation of galena and copper activated sphalerite, tetrahedrite and gold ores. The product can be used in conjunction with xanthate or as a replacement and, depending on mineralogies and flotation circuit conditions, this product may be stronger than xanthate in which case the dosage will be lower than xanthate. It has frothing capabilities so often frother dosages are reduced when switching to this product. It can be fed to the circuit either undiluted or as a solution. Before deciding to dilute the product, because water chemistry can have an impact, stability tests at the solution concentration desired are highly recommended. It is used in neutral to alkaline conditions (> 6 pH). Typical dosage levels depend on ore feed grades, mineralogies and flotation responses, but typical dosage levels range between 10 to 50 grams per metric ton ore.

Properties Suppliers
Danafloat 070

Danafloat 070 is an aryl dithiophosphoric acid. It has strong frothing properties. It is a quite powerful collector and especially in acid or neutral circuits a non-selective product for all sulphides. In alkaline environments, Danafloat 070 is useful for the flotation of copper, silver, gold, lead and zinc sulphides, as in general it does not float pyrite at high pH. Many operators have found that Danafloat 070 together with an alkyl dithiophosphate or a xanthate are the best combinations for optimum grade and recovery. Because of the limited water solubility, it should be added to the grinding circuit or the conditioner. The dosage of Danafloat 070 is wide and varies with the type of ore, usually falling within the range of 10 to 100 grams per metric ton ore. It should be used undiluted.

Properties Suppliers
Danafloat 123

Danafloat 123 is useful as a rougher collector producing a high grade first concentrate. For optimum recovery a scavenger collector, e.g. a stronger dithiophosphate or a xanthate in conjunction with Danafloat 123 is used. It is very selective towards pyrite and other iron sulphides and is therefore used in the flotation of copper sulphide mineral and Cu-activated sphalerite, particularly in the presence of pyrite. It does not float lead sulphide. The collector being a selective reagent is applicable on easy floating liberated copper sulphide like Skim-Air flotation in the grinding circuit. It can be added undiluted or preferably diluted with clear water to 5-20% solutions to better control the dosage. The dosage of Danafloat 123 varies with the type of ore, usually falling within the range of 20 to 100 grams per metric ton ore. It is effective in the pH range of 4 to 12. Because of its selectivity against iron sulphides, Danafloat 123 can be used at lower alkalinity than xanthates.

Properties Suppliers

12
www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X