Concrete Admixtures - suppliers, manufacturers, exporters

Concrete-Admixtures

ADVA 190

ADVA 190 is a polycarboxlate based high-range water-reducing admixture specifically formulated to meet the needs of the concrete industry. It is ideal for use in any concrete where it is desired to minimize the water/cementitious ratio yet maintain workability, ADVA 190 is primarily intended for use in ready-mix concrete, but may also be used in other applications such as precast concrete and self-consolidating concrete. By using it the concrete finishes easily without stickiness, spotty set or tearing and provides a combination of slump life with near neutral set time.

Properties Suppliers
ADVA 140M

ADVA 140M is a high-range water-reducing admixture based on polycarboxylate technology specifically formulated to meet the needs of the concrete industry. It has been used successfully in a wide variety of concrete applications for high-slump, low water-to-cementitious ratio concrete requiring a high-range water reducer to flatwork in residential applications requiring a mid-range water reducer. It produces concrete with excellent workability characteristics for high slump and moderate slump concrete.

Properties Suppliers
Airalon 3000

Airalon 3000 admixture is an aqueous complex mixture of organic acid salts. It is specially formulated concrete air-entraining admixture that provides freeze-thaw resistance, and enhances the finishability characteristics of concrete.

Properties Suppliers
MasterPel 707

MasterPel 707 is a liquid admixture for concrete to achieve high resistance to water ingress. It is based on a blend of surface active agents and refined lignosulphonate. MasterPel 707 should be used in all structural concrete that is constantly or intermittently in contact with water such as sea walls, tunnels, basements, structural and pre-cast concrete in exposed superstructures. MasterPel 707 can also be used as waterproofing cum plasticizing admixture for cement mortars and plasters.MasterPel 707 produces water tight concrete by capillaries breaking technics.

Properties Suppliers
MasterLife CNI

MasterLife CNI is a calcium nitrite based corrosion-inhibiting admixture for steel reinforced concrete. MasterLife CNI helps in minimising and delays corrosion of steel reinforcement and improves structure life. It provides effective corrosion protection against chlorides in concrete,extends the service life of reinforced concrete structures,set acceleration, which may be desirable in cold weather applications.

Properties Suppliers
Conplast WP410F

Conplast WP410F is a hydrophobic waterproofing admixture. It will drastically reduce water absorption in structural and precast concrete. It is suitable for use in sewage facilities, channels, power plants, hydraulic works, water pipes, pools, underground concrete walls and in general, all types of concrete and mortar in contact with water.

Properties Suppliers
Conplast X421IC

Conplast X421IC is an intergral waterproofing liquid admixture for concrete and mortar. It is a dark brown liquid based on lignosulphonates which mixes readily with water and therefore disperses evenly. The features are it improves compaction of concrete and mortar, even where harsh sands or aggregates are used and further it minimises porosity and honey combing and produces dense homogenous concrete.

Properties
MasterCast 1162

MasterCast 1162 is a plasticiser liquid admixture with air entraining properties. It is ideally suited for factoryline concrete production such as block making. ‚ÄčMasterCast 1162 assists in the manufacture of a more uniform and predictable concrete. MasterCast 1162 may also be used in dry pack, standard and light weight concrete production. MasterCast 1162 is mainly for Dry or Semi dry mortars to improve cohesiveness, setting time, strength, finishes of masonary blocks, paver blocks, plasters etc.

Properties Suppliers
MasterGlenium 51

MasterGlenium 51 is an admixture of a new generation based on modified polycarboxylic ether.The product has been primarily developed for applications in high performance concrete where the highest durability and performance is required. MasterGlenium 51 is free of chloride & low alkali. It is compatible with all types of cements. MasterGlenium 51 reduces water content drastically ( > 35%) and helps achieve very high early strength, mainly for Precast Concrete

Properties Suppliers
Chromium(III) Oxide

Chromium(III) oxide is an inorganic compound. It is one of principal oxides of chromium and is used as a pigment. It is used in paints, inks, and glasses. It is one of the materials that are used when polishing the edges of knives on a piece of leather.

Suppliers

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X