Cyanoacrylate Adhesive suppliers, manufacturers, exporters

Cyanoacrylate-Adhesive

Cyanoacrylate Adhesive

Cyanoacrylate Adhesive help in bonding rubber, metal plastic, wood, paper, cardboard, leather, fabric with medium viscosity. Before applying it surface of substrate must be clean, dry and free from oil and grease. Apply proper drops on one side and hold part until cure reaches handling strength.

Properties Suppliers
TECHSIL CYANOACRYLATE GEL

TECHSIL CYANOACRYLATE GEL is a fast curing, very high viscosity ethyl cyanoacrylate based adhesive. The new formulation shows greater surface insensitivity thus allowing faster bonding of all substrates and improved performance on wood, card and metals. The new gel formulation exhibits improved thixotropic behaviour and uniform appearance. It is specially formulated for high strength, general purpose bonding of most metals, wood, card, plastics, rubbers, leather, fabrics and other common substrates. It is suitable for use on vertical and over-head surfaces as it will not drip or slump.

Properties Suppliers
TECHSIL PLASTIC & RUBBER CYANOACRYLATE

TECHSIL PLASTIC & RUBBER CYANOACRYLATE is a low-medium viscosity modified ethyl cyanoacrylate adhesive. It is suitable for bonding a very wide range of materials, including some porous ones, where very fast cure speed is required. It is specially formulated for the bonding of plastics, rubbers, wood, metals and other common substrates. The product is recommended for use on close-fitting parts and smooth, even surfaces.

Properties Suppliers
TECHSIL UNIVERSAL CYANOACRYLATE

TECHSIL UNIVERSAL CYANOACRYLATE is a medium viscosity modified Ethyl Cyanoacrylate adhesive. It is suitable for bonding a very wide range of materials, including some porous ones, where a fast cure speed is required. It is specially formulated for the bonding of plastics, rubbers, wood, paper, leather, metals and other common substrates. It relies on surface moisture for cure speed than standard cyanoacrylates. It is recommended for use on close-fitting parts and fairly smooth, even surfaces.

Properties Suppliers
THREEBOND TB1796B

THREEBOND TB1796B is an accelerator specially developed for cyanoacrylate adhesives. It reduces the setting time, enables porous surfaces such as wood, leather etc. to be bonded, and reduces whitening (blooming). It is a amine-based compound with light yellow/ transparent in appearance.

Properties Suppliers
THREEBOND TB7784

THREEBOND TB7784 is an ultra-rapid curing type instant adhesive whose main component is ethyl-a-cyanoacrylate. When a thin layer of adhesive is applied to one of the substrates and the substrates are laminated, the adhesive causes a chemical reaction in several seconds to a few minutes with the aid of a trace amount of water on the bondered surfaces and becomes a rigid cured substance. It can bond with material remarkably quickly. It exhibits high adhesion instantaneously within 2 seconds to 3 minutes. It is a one-part adhesive, which can be used readily and excels with its quick-curing properties and bonds various materials such as porous and acid materials in a short time.

Properties Suppliers