Buy fluid chemicals | drilling fluid chemicals | heat transfer fluid chemicals

Fluids

SR-LIG

SR-LIG is a naturally occurring material used to reduce fluid loss and deflocculates water base mud. SR-LIG is a partially soluble additive which provides thin, low permeability filter cakes. It is an excellent emulsifier for oil in water emulsions as wells a secondary deflocculated and is especially effective in high temperature applicatios.It performs exceptionally well in dispersed system as a synergistic additive with lignosulphonates.It can be used in virtually any water base fluid. Lignite powder may be use for rheology and filtration control in all water base muds.It is especially effective at stabilizing the properties of muds exposed to high temperature and contamination such as CO2 and calcium. SR-LIG is especially effective when treating cement contamination. It reduces the high viscosity and pH of cement contamination muds and reacts with calcium to lessen the contaminating effects. Normal treatment of SR-LIG range from 2.87 to 22.7 kg/m3.Due to their low pH, it’s treatment require additional caustic soda or an alternative alkaline material to maintain a consistent pH. A normal ratio is 1 sack of caustic soda for every 4sachs of SR-LIG. In high salinity systems. it is preferable to premix the SR-LIG in medium pH fresh water to enhance dispersibility then add the premix to the active system. It is most effective in mud systems with an alkaline pH in the range of 8 to 10.

Properties Suppliers
SR-RXL

SR-RXL is a fine black powder with brown tinge. It is a water soluble, thermally stable synthetic lignite derivative used to achieve filtration control and rheological stability over a wide range of temperature. It can tolerate wide range of soluble contamination. It is additive for all water base drilling fluids with chlorides below 60000 mg/L and hardness not exceeding,3500mg/L. Resinex lignite is formed by the reaction of sulphonated lignite and water soluble resin. It is resin lignite will reduce high temperature fluid loss and stabilize the muds at down hole stability. SR-RXL filtration agent should be used at concentration of 2 to 6 lb/bbl for fluid loss control.to achive optimum solubility the pH should be adjusted above 9.5. Higher density fluid will require greater concentrations of SR-RXL additive. For increase bottomhole temperatures use larger concentrations depending on drilling conditions.

Properties Suppliers
BOREMAX

BOREMAX fresh-water drilling system demonstrates exceptional performance under the most extreme conditions, including high differential pressures, acid gas, wet cement, temperatures up to 375°F and densities up to 17.5 ppg.BOREMAX system is simple to manage and can be implemented successfully using only conventional rig solids control equipment. The cost-effective system helps lower overall drilling cost per foot compared to conventional dispersed or diesel-based systems. The BOREMAX system is maintained without the need for dispersants and caustic materials.

Properties
GLO GUM

GLO GUM manufactured by GDFCL It is a natural occuring high viscosity polymer for use in both salt water and fresh water muds. It is derived from the seed of the guar plant. It is a polysaccharide polymer.It is used for fluid loss control in all water based mud systems specially, in salt water mud. GLO GUM provides viscosity. It can be use in most water types. It is useful for offshore drilling as it can be added directly to the sea water.It is widely available and is an economical source polymer viscosifier.

Properties Suppliers
KLA-HIB

KLA-HIB inhibitor reduces mud volumes through minimized dilution in sensitive west siberian shale.It reduces waster disposal costs, enables drilling to TD with no lost time associated with drilling fluid.

Properties Suppliers
Acetylene

Acetylene is a hydrocarbon and the simplest alkyne. It is unstable in pure form and thus is usually handled as a solution. It is widely used as a fuel and a chemical building block.Acetylene is a compressed gas that is used as a fuel and is stored in a liquid state. It is also used for welding purposes.

Properties Suppliers
Bentonite

Bentonite is an absorbent aluminium phyllosilicate, generally impure clay consisting mostly of montmorillonite. There are different types of bentonites and their names depend on the dominant elements, such as potassium (K), sodium (Na), calcium (Ca), and aluminum (Al). As noted in several places in the geologic literature, there are some nomenclatorial problems with the classification of bentonite clays. Bentonite usually forms from weathering of volcanic ash, most often in the presence of water. However, the term bentonite, as well as a similar clay called tonstein, have been used for clay beds of uncertain origin. For industrial purposes, two main classes of bentonite exist: sodium and calcium bentonite. In stratigraphy and tephrochronology, completely devitrified (weathered volcanic gla

Properties Suppliers
DynaFlush

DynaFlush is a water-based cleaning solution designed to remove residual fluid, scale, debris, oil and other contaminants from heat transfer systems. DynaFlush eliminates trapped contaminants and debris from newly constructed and used systems prior to charging with a clean heat transfer fluid. These contaminants can potentially degrade the fluid over time and act as a catalyst for corrosion. DynaFlush pre-flushing ensures the heat transfer performance of the fluid is maximized for years of system operation.

Properties Suppliers
MAGMA-TEQ

MAGMA-TEQ oil-based drilling fluid to meet the requirements of deviated HP/HT wells. MAGMA-TEQ fluid actually improves with age.

Properties
SR-DEFOAM

SR-DEFOAM is hydrocarbon free.it is for use in both freshwater and saltwater fluids.It is a wide application product that reduce the foaming tendencies as well as completion fluid.SR-DEFOAM contains no oil,will not cause a slick or sheen when used on water location,and is biodegradable.it remains effective,even after intial defoaming,and continues to suppress foam generation over extended period of time. Easy to mix.Work quickly and is effective at low concentrations in a wide range of systems.

Properties Suppliers

12345...11
www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X