Fuel Resistant Industrial Sealants suppliers - world chemicals

Fuel-Resistant-Industrial-Sealants

PRC Rapid Seal 652

PRC Rapid Seal 652 is a non-sag flexible fuel resistant sealant intended for use in chemical storage tanks where there will be exposure to a variety of chemicals such as gasoline, crude oil or ethanol. Other uses are in the chine areas of the tanks to prevent water migration between the steel and concrete base. It is a two-part manganese dioxide cured polysulfide compound. The material can be applied to most typical vertical or overhead joints without sagging. It cures at room temperature to form a resilient sealant having excellent adhesion to steel and concrete.

Properties Suppliers
PRC Rapid Seal 901

PRC Rapid Seal 901 is a quick cure, low odor, high performance, fuel-resistant sealant. It is a two part, epoxy-cured, polysulfide compound. The uncured material is a low sag, thixotropic paste, suitable for application by extrusion gun or spatula. It is designed for use in chemical storage tanks where there will be exposure to a variety of organic fuels. The sealant maintains excellent elastomeric properties after prolonged exposure to many organic fuels.

Properties Suppliers
PRC Rapid Seal 902

PRC Rapid Seal 902 is a rapid cure, low odor, high performance, fuel-resistant sealant. It has a service temperature range from -54°C to 150°C, with intermittent excursions up to 182°C. This material is designed for brush sealing of chemical storage tanks and other industrial oil and gas applications. It is a two-part, epoxy-cured, polysulfide. The uncured material is suitable for application by brush in thickness up to 0.635 mm. It cures at room temperature to form a resilient sealant having excellent adhesion to properly prepared metals and concrete.

Properties Suppliers