Grouting Compounds - suppliers, manufacturers, exporters

Grouting-Products

BETEC 110 HS

BETEC 110 HS is a high sulfate-resistant cement based non-shrink grout with a grain size of 0 – 1 mm and an application thickness of 10-20 mm. It has controlled expansion and is used for applications in structural engineering such as grouting and under filling steel structures, machinery, rails, anchors, as well as grouting of concrete elements and foundations where high sulfate resistance is required.

Properties Suppliers
BETEC 820

BETEC 820 is a cementitious non-shrink grout with a grain size of 0 - 2 mm and an application thickness of < 120 mm. It has controlled expansion and very high early strength. It is used for rapid grouting applications in structural engineering such as rapid grouting and under filling steel structures, machinery, rails, anchors, as well as grouting of concrete elements and foundations.

Properties Suppliers
Cebex FCC422

Cebex FCC422 is a plasticised expanding grout additive. The material is a combination of a plasticising agent, and a gas producing expansive medium, with suitable fillers; which generates gas during the hydration process before the initial set takes place, counteracts the natural settlement and shrinkage of the grout. Stability and cohesion of grout are greatly increased. The selected fillers used ensure uniform mixing. Expansion is controlled to avoid excess pressure built up but sufficient pressure is developed to provide complete contact of the grout with the bearing surfaces, without voids.

Properties Suppliers
Conbextra AT

Conbextra AT is a ready to use dry powder supplied which has been formulated specifically for grouting of bridge bearings and parapet post base plates. The addition of a controlled amount of clean water produces a free-flowing grout with high early and ultimate strengths as well as long term durability, suitable for use in section thicknesses 10 mm to 100 mm. Thicker sections can be achieved by incorporating clean, dry 10 mm aggregate. The features are it is non-shrink, it has high early and ultimate compressive strengths, it provides good flow, its low permeability ensures durability and further it can be poured or pumped.

Properties Suppliers
Conbextra GP2

Conbextra GP2 is a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100 mm. It is a blend of portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout. Its high ultimate strength ensure the durability of the hardened grout and further the free flow ensures high level of contact with load bearing area.

Properties Suppliers
Densified silica fume HPS 92

Densified silica fume is produced by treating undensified silica fume to increase the bulk density up to a maximum of about 400 to 720kg/m . This increase in bulk density is usually accomplished by tumbling the silica-fume particles in a silo, which causes surface charges to build up.

After the micro silica fume is densified, it is convenient to stir the concrete, but it does not affect the fluidity of the microsilica. In the process of concrete production, the use of densified silica fume is more conducive to uniform mixing and improving the comprehensive performance of concrete. Therefore, the application of densified silica fume in building materials such as concrete is more and more extensive.

Suppliers
Hi-Flow Grout

Hi-Flow Grout is specially designed for use where high tolerance, high strength and high fluidity are required. It is formulated as a natural aggregate system with a shrinkage-compensating binder and is highly flow able without sacrificing strength or performance capabilities.

Properties Suppliers
Noble Marble Polish Technical

Noble Marble Polishing Powder

 

Noble Polishing powder is the top quality product for polishing stones especially marbles like Italian, Indian etc. We have tested our product in comparison with world best products available in market. Our Noble is of supreme quality and unbeatable product in current market.

 

Features:

1. Excellent Shine

2. Very Low Cost

3. Long Life Shine

4. Easy to Use

5. Requires low maintenance

 

Instructions:

1.  Use 12000 no diamond pads after 3000 no pads, spread 2 spoon of powder on 2X2 sq ft marble and add little water to make it Cream.

2. Buff with red pad for 5 mins.

3. Add water if required while buffing

4. Used red pad for buffing

5. Once the final polish is achieved, wipe off or wash the floor with water. Do not dry this compound while buffing

Noble Marble Polishing Powder

Noble Polishing powder is the top quality product for polishing stones especially marbles like Italian, Indian etc. We have tested our product in comparison with world best products available in market. Our Noble is of supreme quality and unbeatable product in current market.

Features:

1. Excellent Shine

2. Very Low Cost

3. Long Life Shine

4. Easy to Use

5. Requires low maintenance

Instructions:

1.  Use 12000 no diamond pads after 3000 no pads, spread 2 spoon of powder on 2X2 sq ft marble and add little water to make it Cream.

2. Buff with red pad for 5 mins.

3. Add water if required while buffing

4. Used red pad for buffing

5. Once the final polish is achieved, wipe off or wash the floor with water. Do not dry this compound while buffing

 

Suppliers
hydroxyethylcellulose Purified 99%

Hydroxyethyl Cellulose (HEC) is nonionic water-soluble cellulose ether, used as thickener, protective colloid, water retention agent and rheology modifier in different applications like water-based paints, building materials, oil field chemicals and personal care products.
Typical properties
Appearance White to off-white powder
Particle size 98% pass 100 mesh 
Molar substituting on degree (MS) 1.8~2.5
Residue on ignition (%) ≤0.5
pH value 5.0~8.0
Moisture (%) ≤5.0     
 
 
Popular grades 
Typical grade Bio-grade Viscosity 
(NDJ, mPa.s, 2%) Viscosity
 (Brookfield, mPa.s, 1%) Viscosity setting
HEC HS300 HEC 300B 240-360 LV.30rpm sp2
HEC HS6000 HEC 6000B 4800-7200 RV.20rpm sp5
HEC HS30000 HEC 30000B 24000-36000 1500-2500 RV.20rpm sp6
HEC HS60000 HEC 60000B 48000-72000 2400-3600 RV.20rpm sp6
HEC HS100000 HEC 100000B 80000-120000 4000-6000 RV.20rpm sp6
HEC HS150000 HEC 150000B 120000-180000 7000min RV.12rpm sp6  
 
 
 
Application 
Types of Uses Specific Applications Properties Utilized
Adhesives Wallpaper adhesives 
latex adhesives 
Plywood adhesives Thickening and lubricity
Thickening and water-binding
Thickening and solids holdout
Binders Welding rods 
Ceramic glaze
Foundry cores Water-binding and extrusion aid
Water-binding and green strength
Water-binding
Paints latex paint
Texture paint Thickening and protective colloid
Water-binding
Cosmetics Hair conditioners 
Toothpaste 
liquid soaps and bubble bath Hand creams and lotions Thickening
Thickening
Stabilizing
Thickening and stabilizing
Address:No.188,Huaguang Road,,Zhangdian,Zibo,Shandong,255000,China Tel:+86-533-2688771

Suppliers