Buy lubricant chemicals | lubricant chemicals manufacturers | lubricant chemicals suppliers


Triphenyl Phosphite

Triphenyl Phosphite is an organo-phosphite which provides excellent color improvement and heat stability.It is also known as Triphenyl phosphoric acid ester and Triphenoxyphosphine oxide.We are offering Triphenyl Phosphite with Lubricant Oil Additive Grade with low Apha, Pharma Grade with low Phenol content, Flame retardant Grade with low Phenol and Apha content and Normal Grade(used for PVC stabilizer). 

Butylated Hydroxytoulene Industrial Grade

Butylated Hydroxy Toulene is also used as an antioxidant in products such as metalworking fluids,cosmetics, pharmaceuticals, rubber, electrical transformer oil (at 0.35%), and embalming fluid. In the petroleum industry, where Butylated Hydroxy Toulene is known as the fuel additive AO-29.It is used in hydraulic fluids, turbine and gear oils, and jet fuels. BHT is also used to prevent peroxide formation in diethyl ether and other laboratory chemicals.Some additive products contain BHT as their primary ingredient,while others contain the chemical merely as a component of their formulation,sometimes alongside butylated hydroxyanisole.


CUVAN 303 is an oil-soluble corrosion inhibitor and metal deactivator for lubricants, greases, and metalworking fluids.As a corrosion inhibitor, it is effective in protecting copper, copper alloys, cadmium, cobalt, silver and zinc. As a metal deactivator, CUVAN 303 inhibits oxidation by chelating metal ions that catalyze oxidation.

Properties Suppliers

CARBOBEADS are low density, carbon based spheres, which provide a beneficial boundary layer and friction protection through the formation. CARBOBEADS may be used to increase slide rates when making angle corrections in horizontal drilling operations.

Properties Suppliers

SOLPHALT L is liquid sulfonated asphalt used to stabilize shale formations, increase lubricity, and lower water loss. It can be used in most water-based and all oil-based and synthetic mud systems.


VANLUBE EZ is a concentrated version of VANLUBE AZ that contains no diluent oil. It is a clear, light-colored, and free-flowing liquid. VANLUBE EZ is recommended for use in greases and industrial lubricants. Recommended treatment levels are 0.1 to 2.0 mass percent.

Properties Suppliers

VANLUBE 289 is an effective antiwear additive, by itself or in combination with other antiwear/EP additives. It contains no phosphorus, sulfur, or metals, and it is useful in eliminating and/or reducing levels of these elements in lubricants. VANLUBE 289 affords antiwear protection not provided by other additives such as zinc dithiophosphate (ZDDP), ashless dithiophosphate (ADDP), zinc dithiocarbamate (ZnDTC), molybdenum dithiocarbamate (MoDTC), ashless dithiocarbamate (ADTC), and alkyl thiadiazole (ATD). VANLUBE 289 forms synergistic combinations with these additives.

Properties Suppliers

VANLUBE 0401 is a phosphorus-free synergistic blend of additives recommended for engine oils in order to control high temperature deposits, reduce friction and provide excellent wear and oxidation protection. It is an ideal lubricant additive for the formulation of energy-conserving low phosphorus engine oils.

Properties Suppliers

VANLUBE 0902 additive is a metal-free multifunctional additive package with global product registration. It is recommended for use at 3 to 4% weight in Li 12-OH stearate and Li Complex greases. Grease formulated with VANLUBE 0902 additive should provide excellent corrosion protection, reduce oxidation, minimize wear and carry a high load at extreme pressure conditions.

Properties Suppliers

VANLUBE W 324 lubricant additive is an organotungstate which is soluble in petroleum fuels and lubricants. It is an effective general-purpose, sulfur and phosphorus-free antioxidant and antiwear agent for a wide range of automotive and industrial lubricants.

Properties Suppliers

12 uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X