Metalworking Fluid Preservatives suppliers - world chemicals



ACTICIDE OX is a cost effective preservative with self buffering properties. Maybe used for primary and secondary preservation.

Properties Suppliers

BIOBAN CM14 is an antimicrobial which is an effective preservative in most metalworking fluids as a tank-side additive. It minimize and control the effect of spoilage organisms. It offers protection to metalworking fluids against bacteria, yeasts and fungi. It is a 14% aqueous solution of 5-Chloro-2-methyl-4-isothiazolin-3-one (CMIT) and 2-Methyl-4-isothiazolin-3-one (MIT). It is suitable for use in ferrous and aluminum metalworking systems and is compatible with a selected range of corrosion inhibitors, defoamers, wetting agents etc.

Properties Suppliers

ACTICIDE F(N) is formaldehyde donor, hydroxymethyl ureide based biocide, specifically developed for the primary and secondary preservation of aqueous metalworking fluids, cooling and lubricating emulsions, grinding fluids and similar products. It is not compatible with formaldehyde sensitive products but may be used in most other formulations in which its application is recommended.

Properties Suppliers

KATHON 886 MW microbicide is recommended as a preservative for the manufacture and use of alkaline, acid, and emulsion based metal cleaning fluids typically used in electroplating, phosphatizing, galvanizing, and general metal cleaning operations. It is recommended as a preservative for use in the manufacture and use of high water-based hydraulic fluids and invert emulsion hydraulic fluids. The benefits are it extends metalworking fluid life, resulting in reduced makeup fluid use and costs and lower waste fluid disposal costs. It is very effective against bacteria and fungi. It is recommended for use in soluble, semi-synthetic and synthetic metalworking fluids.

Properties Suppliers

KATHON 893 MW biocide is a broad-spectrum fungicide that has been recommended and widely used for tank side control of fungi in metalworking central systems. It is also an effective fungicide for use in many metalworking fluid concentrates with the appropriate stabilizer package. It is a highly effective, industrial fungicide that exhibits excellent fungi-static and fungicidal activity against fungi, including yeasts and mold, and Gram-Positive bacteria, and limited activity against Gram-Negative bacteria. Commonly known as octhilinone, 2-n-octyl-4-isothiazolin-3-one is the active ingredient of KATHON 893 MW.

Properties Suppliers

BIOBAN CS-1246 is a broad-spectrum bactericide based on oxazolidine and is registered for use in paints, inks, emulsions, slurries, non-food contact adhesives, surfactants, consumer, household and institutional products and metalworking fluids. It is used in metalworking fluids to prevent microbial degradation of oil, emulsifying agents and other components. It is readily incorporated into soluble oil, semisynthetic and synthetic metalworking fluid systems. This preservative is used to inhibit growth of microorganisms.

Properties Suppliers

BIOBAN IPBC 20 antimicrobial, containing 20% w/w 3-Iodo-2-propynylbutylcarbamate (IPBC) as the active ingredient, is a broad spectrum preservative and dry film fungicide effective against a wide range of fungal organisms. It offers excellent “dry film” fungal protection in interior and exterior paints, coatings, wood protective stains and above ground wood preservatives. This product may also be used as a fungicide in paper coatings, inks, adhesives, sealants, cordage, metalworking fluids and building material remediation. It not contain any organo-metallics compounds and is compatible with both aqueous and solvent-based formulations.

Properties Suppliers uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X