Buy mining chemicals | mining chemicals manufacturers | mining chemicals suppliers - Worldofchemicals



MAX HT is a family of products that completely inhibits the precipitation of Bayer Sodalite or Desilication Product (DSP) from Bayer liquors and hence prevents the formation of sodalite scale on hot metal surfaces. The series of products are all aqueous solutions requiring dilution to five percent for application

Properties Suppliers


Properties Suppliers

MOLYFLO is a Amber brown liquid with mild odor.It shows superior recovery and selectivity over kerosene and diesel, which results in more consistent operations over extended time periods. It can be used with all conventional reagents, and is stable over wide pH ranges. It can also be used as a primary or scavenger collector for molybdenite in primary molybdenite ores and in copper-molybdenum bulk flotation processes.

Properties Suppliers
Magnasol AN1

Magnasol AN1 is an anionic flocculant in the from of a solid block which has been specially designed to dissolve slowly in free flowing water and flocculate the associated suspended solids. It is ideally suited for remote locations where electricity is not available.

Properties Suppliers
Meca Flock-25

Meca Flock-25 is a high molecular weightflocculant of polyacrylamide type. It is usedas clarification and filtration agent of riverwater, waste water and industrial water. It has wide application in process treatment of mining, metal & ceramics. Meca Flock-25 shows good flocculation effects with a very little dosage.

Properties Suppliers

Mercury is the only metal that is liquid at standard conditions for temperature and pressure. It is used primarily for the manufacture of industrial chemicals or for electrical and electronic applications. It is used in some thermometers, especially ones which are used to measure high temperatures. A still increasing amount is used as gaseous mercury in fluorescent lamps, while most of the other applications are slowly phased out due to health and safety regulations and is in some applications replaced with less toxic but considerably more expensive Galinstan alloy. Mercury and its compounds have been used in medicine, although they are much less common today than they once were, now that the toxic effects of mercury and its compounds are more widely understood. The element mercury is an ingredient in dental amalgams. Mercury, as thiomersal, is widely used in the manufacture of mascara. The largest use of mercury in the late 20th century was in the mercury cell process where metallic sodium is formed as an amalgam at a cathode made from mercury; this sodium is then reacted with water to produce sodium hydroxide. Historically, mercury was used extensively in hydraulic gold mining in order to help the gold to sink through the flowing water-gravel mixture. RoHS bans mercury from certain electrical and electronic products, and limits the amount of mercury in other products to less than 1000 ppm.

Properties Suppliers
Metallurgy Chemicals

The metallurgical sector uses many chemical agents on a regular base in its daily manufacturing processes: paints, solvents, resins, polyurethanes, oils but mainly for surface treatments (mechanical, chemical, electrochemical or physical operations aiming at changing / improving the appearance or the function of materials’ surface to adapt them to specific conditions of use: corrosion protection or improvement of physical characteristics for example) and cleansing operations. Because of the high diversity of treated metals, these operations are very varied, hence the presence of many products (surfactants; complexing agents as EDTA; acids - hydrochloric acid, nitric acid, phosphoric acid, sulphuric acid, acetic acid; bases - sodium and potassium hydroxides, lime; solvents; colorants and wastes).

Properties Suppliers
Mining Chemicals

Mining Chemicals play a vital role in enhancing the productivity and efficiency of mining processes such as the recovery and extraction of minerals and target materials from ore.

Properties Suppliers
Nasfroth FCM 70

Nasfroth FCM 70 is a frother that gives good kinetic and equilibriun recovery whilst maintaining selctivity of the float. Particularly good for Copper / Moly flotation.

Properties Suppliers