Buy paint additives, chemicals | paint additives manufacturers | paint additives suppliers } Worldofchemicals

Paints-Coatings

RUCO-COAT AC 4220

RUCO-COAT AC 4220 is aqueous acrylic ester dispersion for paste or foam coatings, can be crosslinked, for a transparent, flexible, weakly tacky film.

Properties Suppliers
RUCO-COAT TH 5000

RUCO-COAT TH 5000 is suitable for fluorocarbon water-repellent coatings, electrolytes.

Properties Suppliers
RayCryl 412

RayCryl 412 is a 100% acrylic emulsion designed for blending with cement and concrete products.RayCryl 412 provides excellent workability, flexibility and compressive strength.It exhibits outstanding pot life under high temperature condition.

Properties Suppliers
RayFlex 303

RayFlex 303 is a high-solids, acrylic elastomeric emulsion polymer for high performance wall mastics and roof coatings.RayFlex 303 provide outstanding adhesion to a wide range of construction substrates,high tensile strength and elongation,excellent exterior durability and UV resistance.

Properties Suppliers
RayTech 49

RayTech 49 is a surfactant free, styrene-acrylic solution polymer with outstanding water resistance and water blush resistance.

Properties Suppliers
RayVace 331

RayVace 331 is a high solid, all-purpose vinyl acrylic emulsion designed for industrial and architectural applications

Properties Suppliers
RayVace 678

RayVace 678 is an APEO and formaldehyde free vinyl acrylic emulsion polymer, designed specifically for interior flat and semigloss coatings

Properties Suppliers
Red Lead Oxide

Red lead oxide is most often used as a pigment for primer paints for iron objects. Due to its toxicity, its use is being limited. In the past, it was used in combination with linseed oil as a thick, long-lasting anti-corrosive paint. The combination of minium and linen fibres was also used for plumbing, now replaced with PTFE tape. Currently it is mostly used for manufacture of glass, especially lead glass. It finds limited use in some amateur pyrotechnics as a relatively potent oxidizer.

Properties Suppliers
Resiflow PV-88

Resiflow PV-88 is widely known in Europe for its reliable performance as a flow control agent for general industrial powder coatings. It is well suited for the spectrum of common binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. Resiflow PV-88 is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. For best results, Resiflow PV-88 should be dry-blended with other coating raw materials, then homogenized in a heated extruder. The active ingredient is released and homogenized with the other components during extrusion, and results in a uniform system. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow PV-88 into powder coating formulations. As with any raw material, laboratory evaluation is required for each formulation to determine the best processing method and the optimum concentration of the additive.

Properties Suppliers
Rheoflow AF-700

Rheoflow AF-700 is based on a silicone-free, specialized acrylic surface active agent and has excellent defoaming power with good levelling properties.

Properties Suppliers