plastics, polymer industry chemicals | polymer chemicals manufacturers, suppliers

Plastics-Polymers

Royaltuf 945 A

Royaltuf 945 A is designed to upgrade mechanical or processing properties of other polymers or to improve the appearance of finished parts. It provides impact resistance in PVC, SAN, PC, and PBT resin systems as well as alloys of these.

Properties Suppliers
SABIC HDPE B5429

SABIC HDPE B5429 is a medium molecular weight high density polyethylene copolymer. It is primarily intended for blow moulding bottles of small sizes. SABIC HDPE B5429 offers an excellent combination of toughness, stress cracking resistance (ESCR), load bearing strength and processability characteristics. SABIC HDPE B5429 is classified as a multipurpose blow moulding grade. It may be blow moulded into containers for household and industrial chemicals (e.g. detergents, bleach, fabric softeners, solvents, paints, etc.), automotive supplies, foodstuffs, toiletries and cosmetics. It can also be used in other hollow thin-walled parts and profile extrusions. SABIC HDPE B5429 has been run on the latest high speed blow moulding machines at maximum rates to produce articles of excellent quality.

Properties Suppliers
SABIC HDPE F00952

SABIC HDPE F00952 resin is a high molecular weight high density polyethylene copolymer which has been designed specifically for blown film extrusion.Its high molecular weight, broad molecular distribution and high density combine succesfully to give excellent extrudability with high film strenght and rigidity. The material contains antioxidant. SABIC HDPE F00952 resin is recommended for blown film extrusion. This product is suggested for the manufacture of high strength grocery sacks, shopping bags and high quality thin films for multi wall sack liners and replacement for thin paper products.

Properties Suppliers
SABIC LDPE HP2023JN

SABIC LDPE HP2023JN is a low density Polyethylene (LDPE) grade suitable for general purpose packaging. SABIC LDPE HP2023JN contains slip (500ppm) or anti-block agents (1000ppm). It possesses flexibility, recyclability, toughness and shows better draw down, good optical and mechanical properties.SABIC LDPE HP2023JN is suitable for processing by blown film extrusion molding.SABIC LDPE HP2023JN used in thin shrink film, lamination film, produce bags, textile packaging, soft goods packaging, general-purpose bags with good optics and t-shirts carrier bags.

Properties Suppliers
SABIC LLDPE 218W

SABIC LLDPE 218W is a linear low density Polyethylene (LLDPE) grade suitable for general purpose packaging.SABIC LLDPE 218W contains high slip (1500ppm) and high anti-block agents (3500ppm).SABIC LLDPE 218W possesses good tensile- and optical properties, shows impact strength, toughness, flexibility, recyclability and is easy to process.SABIC LLDPE 218W Is suitable for processing by blown film extrusion molding.SABIC LLDPE 218W applications include lamination film, thin liners, shopping bags, carrier bags, garbage bags, coextruded films and consumer packaging.It is a food contact approved grade.

Properties Suppliers
SABIC LLDPE 218WJ

SABIC LLDPE 218WJ is a butene Linear Low Density Polyethylene TNPP free grade suitable for general-purpose packaging. SABIC LLDPE 218WJ is easy to process giving good tensile properties, impact strength and optical properties. SABIC LLDPE 218WJ contains slip and antiblock additives.

Properties Suppliers
SABIC LLDPE 318CNJ

SABIC LLDPE 318CNJ is a Linear Low Density Polyethylene TNPP free grade designed for wire and cable applications. It contains optimized level of antioxidants and does not contain any slip and antiblock additives. It is a sufficient antioxidant and Cu-inhibitor should be added to meet specific ageing requirements. SABIC LLDPE 318CNJ used for jacketing applications, addition of Carbon Black or UV stabilizer is required.One-step or two-step Silane cross-linkable insulation for Low Voltage power insulation cable, Aerial bundle cable and suitable for elecommunication.

Properties Suppliers
SABIC LLDPE 324CE

SABIC LLDPE 324CE is aLinear Low Density Polyethylene natural resin typically usedfor wire and cable applications. SABIC LLDPE 324CE contains a low level of antioxidants and does not contain any antiblock and/or slip agents.It also exhibits good Environmental Stress Crack Resistance (ESCR).It has got sufficient Cu-inhibitor should be added to meet specific ageing requirements. SABIC LLDPE 324CE is used for jacketing applications, addition of Carbon Black or UV stabilizer is required. It is used in Telecommunication and Power cable (LV, MV, HV)jacketing.- Halogen-free flame retardant (HFFR) compounds.SABIC LLDPE 324CE is for one-step or two-steps silane crosslinkable for cable insulation.SABIC LLDPE 324CE is not intended for and must not be used in any pharmaceutical / medical applications.

Properties Suppliers
SABIC LLDPE 324CNJ

SABIC LLDPE 324CNJ is a Linear Low Density Polyethylene TNPP free grade designed for wire and cable applications.It contains low levelof antioxidants and does not contain any slip and antiblock additives.It is sufficient antioxidant and Cu-inhibitor should be added to meet specific ageing requirements. SABIC LLDPE 324CNJ used for jacketing applications, addition of Carbon Black or UV stabilizer is required.

Properties Suppliers
SABIC LLDPE F2111BS

SABIC LLDPE F2111BS is a linear low density polyethylene resin and is typically used for blown film applications.Films made from SABIC LLDPE F2111BS resin typically exhibits good optical properties, impact strength and tensile properties. SABIC LLDPE F2111BS contains high level of both slip and anti-blocking agents.Heavy duty liner, carrier bag, garment packaging, mulch film, garbage bag. SABIC LLDPE F2111BS is not intended for use in medical and pharmaceutical applications.

Properties Suppliers