Buy Polymeric-Surfactants| manufacturers | suppliers | wholesales | traders | exporters

Polymeric-Surfactants

CELLESH 700

CELLESH 700 is a special blend of polymeric surfactant and chelating agent. It has excellent chelating against Ca, Mg and heavy metal ions. It has prolonging scouring power. It is a good anti-redeposition of sizing agent and hidrolized polyester substances (0.5-2g/l). It is applicable to natural and/or synthetic fibers in the area where hard substances/impurities attached to the fiber cause some troubles.

Properties Suppliers
Cellulose acetate butyrate ?? 98%,99%

CAS No.: 9004-36-8
Molecular formula:C4H8O2XC2H4O2X
Molecular weight:318.233
Appearance: white granular crystalline powder
Melting point:127-240 °C
Density:1.25 g/mL at 25 °C(lit.)
Specification of CAB cellulose acetate butyrate:
CAB-551-0.01
CAB-551-0.2
CAB-553-0.4
CAB-531-1
CAB-381-0.1
CAB-381-0.5
CAB-381-2
CAB-381-2 BP
CAB-381-20
CAB-381-20 BP
CAB-321-0.1
CAB-171-15S
Product description about Cellulose acetate butyrate CAS 9004-36-8: 
Cellulose Acetate Butyrate is a butyric acid ester of a partially acetylated cellulose.
It commonly known as butyrate, is resistant to ultraviolet rays, has a lower moisture absorption than acetate and has an extremely high impact strength.
Cellulose Acetate Butyrate is application for pipe, tool handles, instrument housing, lighting, packaging film, and marine hardware.It can be processed by extrusion, injection molding, blow molding, rotational molding, and thermoforming. It is often used to make binding and edging strips as an alternative to ABS.

Suppliers
Oilfield Cement Additive Dispersant SP by MIDAS IP

MID-C204/MID-204L is a high range water reducer. It meets the requirements of chemical admixture specifications for concrete: ASTM C494, DS-5075, and JIS-6204. It can be used for ocean oil drilling platform, Off-shore and marine structures etc. MID-C204/MID-204L is especially applicable to different types of concretes including anti-freeze/thaw concrete.

 

Suppliers
Oilfield Cement Additive Dispersant by Midas IP

MID-C203/MID-C203L is a cement friction-reducing additive which will reduce the apparent viscosity and improve the rheological properties of cement slurry. The improved rheological properties result in reduced frictional pressures during pumping, and turbulent flow can be achieved at lower pumping rates. With a reduction in a slurry’s apparent viscosity, the slurry can be mixed at a higher density than normal by reducing the mixing water, and the slurry is still pump able.

 

- Ready mixed concrete

- Underwater concrete

- Self-compacting concrete

- High strength concrete for dam, bridge and high-rise building

- Concrete secondary products such as precast concrete and concrete pile

- Fly ash concrete, blast furnace slag concrete

- Lightweight concrete

Suppliers
Oilfield Cement Additive Retarder HT by Midas IP

Midas MID-C102/MID-102L is a mixture of natural polymer and an organic acid. 

It is a high temperature retarder which can be used to retard all kind of API classes of cement and is effective in wells with temperature up to 350?.

This additive provides excellent retardation in wells with bottom hole circulating temperature of

350?.

MID-C102/MID-102L has a dispersing effect on the slurry, increases thickening time and decreases the viscosity of the slurry.

The recommended dosage is 0.1% - 0.5% (BWOC) or 0.5-2.0 USGal/SK depending on slurry’s weight, well’s temperature and solids to water ratio. High concentrations of this retarder and inconvenient  compound of the slurry may cause the slurry separation.

Suppliers
Oilfield Cement Additive Retarder Hi-Pro by Midas IP

Midas MID-C106/MID-106L is a mixture of natural polymer and an organic acid.

MID-C106/MID-106L is a high temperature retarder which can be used to retard all kind of API classes of cement and is effective in wells with temperature up to 350?.

This additive provides excellent retardation in wells with bottom hole circulating temperature of 360?.

MID-C106/MID-106L has a dispersing effect on the slurry, increases thickening time and decreases the viscosity of the slurry.

The recommended dosage is 0.1% - 0.5% (BWOC) or 0.5-2.0 USGal/SK depending on slurry’s weight, well’s temperature and solids to water ratio. High concentrations of this retarder and inconvenient compound of the slurry may cause the slurry separation.

Suppliers
Oilfield Cement Additive Retarder LT by Midas IP

MID-C101/MID-C101L is a natural polymer. It can be used to retard the setting of all classes of cement. It is a low temperature retarder for intermediate wells with bottom hole circulating temperatures as high as 180°F.

MID-C101/MID-C101L provides excellent retardation in wells with bottom hole circulating temperature up to 180°F. It has dispersing effect on the slurry, thus decreasing the viscosity.

The recommended dosage is 0.1% - 0.5% (BWOC) or 0.5 - 2.0 USGal/SK depending on slurry’s weight, well’s temperature and solids to water ratio.

Suppliers
Oilfield Cement Additive Retarder MT by Midas IP

Midas MID-C103/MID-C103L is a mixture of natural polymer and an organic acid. 

MID-C103/MID-C103L is a  moderate to high temperature retarder which can be used to retard all kind of API classes of cement and is effective in wells with temperature up to 275℉.

MID-C103/MID-C103L has a dispersing effect on the slurry, increases thickening time and decreases the viscosity of the slurry.

The recommended dosage is 0.1% - 0.5% (BWOC) or 0.5-2.0 USGal/SK depending on slurry’s weight, well’s temperature and solids to water ratio. High concentrations of this retarder and inconvenient compound of the slurry may cause the slurry separation.

Suppliers
Oilfield Cement Additive Retarder Super by Midas IP

Midas MID-C107/MID-107L is a mixture of natural polymer and an organic acid.

MID-C107/MID-107L is a high temperature retarder which can be used to retard all kind of API classes of cement and is effective in wells with temperature up to 570℉.

This additive provides excellent retardation in wells with bottom hole circulating temperature of 570℉.

MID-C107/MID-107L has a dispersing effect on the slurry, increases thickening time and decreases the viscosity of the slurry.

The recommended dosage is 0.1% - 0.5% (BWOC) or 0.5-2.0 USGal/SK depending on slurry’s weight, well’s temperature and solids to water ratio. High concentrations of this retarder and inconvenient compound of the slurry may cause the slurry separation.

Suppliers
POIZ 520

POIZ 520 is a special type of polycarboxylates surfactant which can be used as dispersing agent for filler, pigment and paint in water. The product shows excellent dispersing ability for many kind of inorganic pigment, especially for calcium carbonate. The product shows excellent dispersing effect to make emulsion, especially for styrene-acryl type emulsion.

Properties Suppliers

12