Redispersible Polymers suppliers, manufacturers, exporters


Aquapas N2020

Aquapas N2020 is a redispersible polymer powder which is a copolymer of vinyl acetate and ethylene. It is used for high quality dry mortars. It is best suited for high-performing ceramic tile adhesives. It promotes adhesion and flexibility under a wide variety of climate conditions.

Properties Suppliers
Aquapas N2028

Aquapas N2028 is a redispersible polymer powder which is a copolymer of vinyl acetate and ethylene. It is a free-flowing powder that readily disperses in water. It is best suited for high performing construction applications. In the production of dry-mortars, it should be blended with other dry ingredients in appropriate mixers.

Properties Suppliers
Acronal S 430 P

Acronal S 430 P is a redispersible polymer powder which is mainly used to modify hydraulic binders such as cement, lime and gypsum, and to manufacture flexible coatings. It is based on an aqueous, anionic dispersion of a copolymer of an acrylic ester and styrene, free of plasticizers. It can be used to reduce the elastic modulus of mortars and increase their elongation at break, their abrasion resistance and their adhesion. It provides a large increase in flexibility, even at temperatures below 0 °C. It can also be used to improve the properties of adhesive sealants.

Properties Suppliers
Acronal S 631 P

Acronal S 631 P is a redispersible polymer powder which is mainly used to modify inorganic binders such as cement, lime and gypsum. It is a copolymer of butyl acrylate and styrene in powder form. It can be used in stiffer repair mor­tar and adhe­sive mor­tar for­mu­la­tions. It enhances the strength, abra­sion resis­tance and adhe­sion of mor­tars in cases in which the dry­ing rate is too high for the inoganic binder to cure quickly enough. Even if suf­fi­cient mois­ture is avail­able, adding Acro­nal S 631 P has the advan­tage that it increases the flex­ibil­ity of the cured com­pound and improves its adhe­sion to dif­fi­cult substrates, even if it is exposed to mois­ture.

Properties Suppliers

ELOTEX BRICOR800 is a styrene/acrylic redispersible binder in powder form. It provides several efflorescence preventing mechanism, resulting to an efficient efflorescent reduction to low cement decorative finishes. Due to styrene/acrylic polymer base, it performs outstanding adhesion/cohesion properties and maintains the aesthetic appearance of surfaces for long period of time.

Properties Suppliers
hydroxyethylcellulose Purified 99%

Hydroxyethyl Cellulose (HEC) is nonionic water-soluble cellulose ether, used as thickener, protective colloid, water retention agent and rheology modifier in different applications like water-based paints, building materials, oil field chemicals and personal care products.
Typical properties
Appearance White to off-white powder
Particle size 98% pass 100 mesh 
Molar substituting on degree (MS) 1.8~2.5
Residue on ignition (%) ≤0.5
pH value 5.0~8.0
Moisture (%) ≤5.0     
Popular grades 
Typical grade Bio-grade Viscosity 
(NDJ, mPa.s, 2%) Viscosity
 (Brookfield, mPa.s, 1%) Viscosity setting
HEC HS300 HEC 300B 240-360 LV.30rpm sp2
HEC HS6000 HEC 6000B 4800-7200 RV.20rpm sp5
HEC HS30000 HEC 30000B 24000-36000 1500-2500 RV.20rpm sp6
HEC HS60000 HEC 60000B 48000-72000 2400-3600 RV.20rpm sp6
HEC HS100000 HEC 100000B 80000-120000 4000-6000 RV.20rpm sp6
HEC HS150000 HEC 150000B 120000-180000 7000min RV.12rpm sp6  
Types of Uses Specific Applications Properties Utilized
Adhesives Wallpaper adhesives 
latex adhesives 
Plywood adhesives Thickening and lubricity
Thickening and water-binding
Thickening and solids holdout
Binders Welding rods 
Ceramic glaze
Foundry cores Water-binding and extrusion aid
Water-binding and green strength
Paints latex paint
Texture paint Thickening and protective colloid
Cosmetics Hair conditioners 
liquid soaps and bubble bath Hand creams and lotions Thickening
Thickening and stabilizing
Address:No.188,Huaguang Road,,Zhangdian,Zibo,Shandong,255000,China Tel:+86-533-2688771

hydroxypropyl methylcellulose Technical 99%

Hydroxypropyl Methyl Cellulose (HPMC) are widely used in construction,pharmaceutical,food,paints, cosmetic,detergent ,as thickener, emulsifier, film-former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.
Appearance White or off-white powder
Methoxy ( % ) 19.0~ 24.0
Hydroxypropoxy ( % ) 4.0 ~ 12.0
pH 5.0~ 7.5
Moisture ( % ) ≤ 5.0
Residue on ignition ( % ) ≤ 5.0
Gelling temperature ( ℃ ) 70~ 90
Particle size min.99% pass through 100 mesh
Typical grade Viscosity
(NDJ, mPa.s, 2%) Viscosity
(Brookfield, mPa.s, 2%)
HPMC MP400 320-480 320-480
HPMC MP60M 48000-72000 24000-36000
HPMC MP100M 80000-120000 40000-55000
HPMC MP150M 120000-180000 55000-65000
HPMC MP200M 160000-240000 Min70000
HPMC MP60MS 48000-72000 24000-36000
HPMC MP100MS 80000-120000 40000-55000
HPMC MP150MS 120000-180000 55000-65000
HPMC MP200MS 160000-240000 Min70000
Construction Applications:
Tile Adhesive
•Good water retention: prolonged opening time will make tiling more efficient.
•Improved adhesion and sliding resistance: especially for heavy tiles.
•Better workability: lubricity and plasticity of plaster is ensured, mortar can be applied easier and quicker.
Cement Plaster / Dry mix mortar
•Easy dry mix formula due to cold water solubility: lump formation can be easily avoided, ideal for heavy tiles.
•Good water retention: prevention of fluid loss to the substrates, the appropriate water content is kept in mixture which guarantees longer concreting time.
•Increased water demand: increased open time, expanded spry area and more economical formulation.
•Easier spreading and improved sagging resistance due to improved consistency.
Wall putty
•Water retention: maximized water content in slurry.
•Anti-sagging: when spreading a thicker coat corrugation can be avoided.
•Increased mortar yield: depending on the weight of the dry mixture and appropriate formulation
HPMC can increase the mortar volume.
Exterior Insulation and Finish System ( EIFS )
•Improved adhesion.
•Good wetting ability for EPS board and substrate.
•Reduced air entrancement and water uptake.
•Protection from water exudation and material sedimentation.
•No effect on slurry fluidity with low viscosity
HPMC, while its water retention characteristics improve the finish performance on the surface.
Crack Filler
·Better workability: proper thickness and plasticity.
·Water retention ensures prolonged work time.
·Sag resistance: improved mortar bonding ability.

Suppliers uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X