Make your products visible globally with Elite Membership.
I agree to the terms and conditions
Existing User?
Sign In with Email
Remember Me Forgot Password?
New User?
Enter your registered Email ID to get reset password.
Elite Member
Individual Register
Hydrex R is sodium magnesium aluminosilicate based reinforcing agent for molded rubber goods.
Zeolex 23 is sodium magnesium aluminosilicate based semi-reinforcing agent for molded rubber goods.
Santoweb H, a treated cellulose fiber product, provides reinforcement for uncured and cured rubber compounds, increases product stiffness, and reduces cut growth rate in EPDM and IIR compounds. Santoweb H increases modulus in both stress and compression mode of EPDM and IIR compounds. It should be used with a melamine donating chemical for applications in which adhesion of the fiber to the rubber matrix is critical. Santoweb H increases green strength, reduces die swell and cold flow. Santoweb H discolors because it is black, but does not cause compound staining. Santoweb H can be used for low pressure hoses, gaskets, and diaphragms. It increases modulus in both stress and compression mode of EPDM and IIR compounds. Santoweb H should be stored in single stacked pallets in a cool, dry, well ventilated area, avoiding exposure of the packaged product to direct sunlight.
SANTOWEB W a treated cellulose fiber product, provides reinforcement, increases product stiffness and reduces cut growth rate for NBR and Silicone rubber compounds, white compounds based on other rubber types and PVC. Santoweb W increases modulus in both stress and compression mode of NBR compounds. It increases green strength and reduces die swell. Santoweb W is a white filler so it does not discolor the compound or cause compound staining. Santoweb W can be used for low pressure PVC hoses, medium pressure NBR hoses, gaskets, diaphragms, and vinyl flooring.
Santoweb DX a treated cellulose fiber product, provides reinforcement for uncured and cured rubber compounds, increases product stiffness and reduces cut growth rate in NR, SBR, BR, and CR compounds. Santoweb DX increases elongation and compression stress levels of rubber compounds. It increases compound green strength, reduces die swell and cold flow. Santoweb DX discolors because it is black, but does not cause compound staining. Santoweb DX can be used for tire tread compounds for highway truck and OTR applications, tire bead wrap, power transmission belts, uncured roof sheeting, and static rubber articles requiring cut growth resistance. Santoweb DX is regulated for use in articles in contact with food as specified under BgVV XXI, Category 4. Santoweb DX is not regulated for use in FDA food contact applications. Store Santoweb DX in single stacked pallets in a cool, dry, well ventilated area, avoiding exposure of the packaged product to direct sunlight. Santoweb DX fibers tend to absorb moisture that can be removed by exposure to moderate heat. Temperature during heat treatment should not exceed 110 °C.
Zeopol 8745 is silicon dioxide based highly dispersible reinforcing agent for rubber products.
Huberpol 135 is silicon dioxide based semi-reinforcing agent for rubber goods.
nil
Zeopol 8755LS chemical composition is silicon dioxide. Zeopol 8755LS is highly dispersible reinforcing agent for rubber products.
Stay updated with the latest chemical industry trends and innovations.
Verification Code has been sent to
Please enter the Verification Code below to verify your Email Address.If you cannot see the email from "noreply@worldofchemicals.com" in your inbox,make sure to check your SPAM Folder