Make your products visible globally with Elite Membership.
I agree to the terms and conditions
Existing User?
Sign In with Email
Remember Me Forgot Password?
New User?
Enter your registered Email ID to get reset password.
Elite Member
Individual Register
MEGUM 128 is a solvent-based adhesive to bond rubber compounds to metals and other rigid substrates during vulcanization. It is suitable for all common curing systems, especially fast-curing natural rubbers and rubber blends.
MEGUM 3290 is a one-coat bonding agent for bonding fluoro-carbon rubbers to metals and other rigid substrates during volcanization. It adheres to hot and cold rolled steel, stainless steel, aluminum, brass, as well as thermoplastics such as polyamides and polyesters.
THIXON 305 is a solvent-based one-coat adhesive for bonding silicone compounds to metal during vulcanization. It adheres to hot and cold rolled steel, stainless steel, aluminum, brass, as well as thermoplastics such as polyamides and polyesters. It can be used with all common molding and curing methods. Cure temperatures between 120°C and 200°C are recommended.
THIXON 406 is a one-coat bonding agent used for bonding castable polyurethane elastomers to metal. It is also suitable for bonding thermoplastic polyurethanes to metal. It should only be used for bonding castable polyurethanes where the curing temperatures are greater than 75°C to 80°C. It adheres to hot and cold rolled steel, stainless steel, aluminum, brass as well as thermoplastics such as polyamides and polyesters.
Eastoflex E1003 Amorphous Polyolefin is a broad compatibility with numerous elastomers, polymers and other tackifying resins. It is a propylene homopolymer having excellent water and moisture resistance. Further it provides broad temperature service range and excellent thermal and UV stability.
Eastoflex M1014 Amorphous Polyolefin are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. They are characterized by consistent quality, low odor, good heat stability, and low color. It is a blend of propylene homopolymer and copolymers of propylene and ethylene.
Eastoflex P1010 Amorphous Polyolefin are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. They are characterized by consistent quality, low odor, good heat stability, and low color. Further it is a propylene homopolymer.
Eastoflex E1045PL Amorphous Polyolefin is a copolymer of propylene and ethylene, pelletized and coated with a polypropylene powder. It has a melt viscosity of 4,500 mPas at 190°C. The key attributes are it has broad temperature service range, it has excellent thermal and UV stability and further it has excellent water and moisture resistance.
Eastoflex E1200PL Amorphous Polyolefin is a copolymer of propylene and ethylene, pelletized and coated with a polypropylene powder, having a melt viscosity of 17,000 mPa·s at 190°C. It provides broad compatibility with numerous elastomers, polymers and other tackifying resins. It is characterized by consistent quality, low odor, good heat stability, and low color.
Stay updated with the latest chemical industry trends and innovations.
Verification Code has been sent to
Please enter the Verification Code below to verify your Email Address.If you cannot see the email from "noreply@worldofchemicals.com" in your inbox,make sure to check your SPAM Folder