Surface Treatment Chemicals - suppliers, manufacturers, exporters

Surface-Treatment-Products

Concure 90

Concure 90 is a spray applied membrane to retain moisture in concrete for effective curing. It is suitable for all general concreting applications and of particular benefit for large area concrete surfaces, such as airport runways, roads and bridge works. The features are its improved curing of concrete enhances cement hydration and provides a more durable concrete and further the control of moisture loss improves surface quality, reducing permeability, producing a hard wearing, dust free surface and minimising potential for surface cracking and shrinkage.

Properties Suppliers
Reebol 2010

Reebol 2010 is a ready to use mineral release agent that allows easy stripping of moulds and formworks. It is suitable for all kinds of molds, retains the characteristics of the concrete surface, allowing subsequent application of paints or coatings. The advantages are it allows the deferred stripping of concrete after setting, once applied, it is low sensitive to washout by rain and further it fits perfectly to the concrete with or without steam curing.

Properties
Starcryl-A76

Starcryl-A76 is specially formulated polymer emulsion for modifying cementitious compositions, cement primers, crack fillings, anchors and grouts, waterproofing and damp proofing. Mortars prepared with Starcryl A76 are durable tough and ideal for use in thin section applications. They have excellent adhesion to various substrates like wood, concrete, brick and metal.

Properties Suppliers
MasterTile 15

MasterTile 15 is Coloured, joint grout for ceramic, vitrified tiles.It sets to a decorative water resistant finish (it is not suitable for heavily trafficked floor areas). MasterTile 15 is used in Swimming pools & shower rooms,Ceramic tiles, vitrified tiles,Natural Stone not prone to staining,Medium and small sized mosaic.

Properties Suppliers
MasterTile 30

MasterTile 30 is a polymer enriched, cementitious tile adhesive for thin bed fixing of ceramics and vitrified tiles in interior or exterior situations, especially those exposed to permanently wet conditions.It provides strong adhesion to cement / sand screeds, to in-situ / pre-cast and aerated concrete,and brickwork. It is also suitable for substrate such as glazed tiles, Vitrified tiles & terrazzo. MasterTile 30 is the adhesive of choice for swimming pools and may be used with confidence in all wet process applications.

Properties Suppliers
MasterTop 100

MasterTop 100 is a pre-mixed powder designed to be applied as a dry shake over freshly floated concrete floor. MasterTop 100 is recommended for treating floor areas not exposed to serious chemical attack and where uniform appearance and enhanced abrasion resistance are desired. MasterTop 100 creates an aesthetically pleasing, colored floor with significantly improved abrasion resistance. It is based on selected hard wearing mineral aggregates blended with alkali and light fast pigments and hydraulic binders. It is easy to clean. MasterTop 100 is applied for Light Industrial and commercial buildings, Basement and cellars, Mechanical workshops, Storage rooms, Educational institutions, Parking areas and Loading platforms.

Properties Suppliers
MasterTop 410

MasterTop 410 is a non-metallic floor hardener, which contains specially graded non-metallic hard wearing natural aggregates.MasterTop 410 is not recommended for use in areas where floor surface will be exposed to acids, their salts or materials which seriously and rapidly attack concrete. For applications under these service conditions consult BASF about their range of chemical resistant flooring systems, such as MasterTop 1200 series. MasterTop 410 can be easily applied as a dry shake over freshly floated concrete to provide a durable, non-slip monolithic floor.

Properties Suppliers
Starcryl-A400

Starcryl-A400 is used in manufacture of flexible waterproofing two component adhesive mortars and of flexible insulating coatings containing cement. Starcryl-A400 is especially good for the manufacture of systems used to bridge cracks and for flexible coatings.

Properties Suppliers
MasterTile 400

MasterTile 400 is a grey colored, polymer enriched, cementitious tile adhesive with extended open time and reduced slip for thin bed fixing of fully vitrified ceramic tiles and porcelain mosaic tiles in interior or exterior situations, especially those exposed to permanently wet conditions. MasterTile 400 provides strong adhesion to cement/sand screeds, to in-situ/pre-cast and aerated concrete, and brickwork. It is also suitable for fixing Glazed tiles, Vitrified tiles & Terrazzo. MasterTile 400 is suitable for Ceramic tiles conforming to IS13712(2006) type Ia, Ib, IIa ,IIb tiles,wet areas including kitchen, bathrooms &Showers in domestic, institutional, commercial and industrial location,Floors, Walls, Podium decks, roofs including large format tiles,Laying Ceramic, Porcelain Mosaic, Fully vitrified tiles and brick tiles,Swimming pools, pool surrounds, wet rooms and cold storage depots.

Properties Suppliers
MasterTop 1202

MasterTop 1202 is a three-component, solvent free, high build epoxy resin coating designed to provide continuous protection for concrete substrates. MasterTop 1202 is recommended to coat new floors & floors needing refurbishment, where protection from spillage of oil and other common chemicals is required. MasterTop 1202 is used to provide a hard wearing, easily cleaned and non-dusting surface. MasterTop 1202 provides a protective coating which is impermeable to liquids, abrasion resistant and easy to clean. MasterTop 1202 used for Engineering workshops, Production and assembly lines, Aircraft maintenance and assembly, Industrial & Warehousing floors, Parking Areas and Laboratories.

Properties Suppliers

12
www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X