Industrial coolants suppliers, manufacturers, exporters

Synthetic-coolants

APEX 6420

APEX 6420 is a light to moderate duty synthetic coolant. Formulated for use in grinding applications and light duty machining. It runs very clean and is low foaming in hard and soft water applications. It works well in both ferrous and most nonferrous applications. It has superior oil rejecting capabilities.

Properties Suppliers
APEX 6500

APEX 6500 is a moderate to heavy duty synthetic coolant. It has superior oil rejecting capabilities. It is formulated with extremely high lubricity for high speed machining with high feed rates. It runs very clean and is low foaming in hard and soft water applications. It works well in both ferrous and most nonferrous applications.

Properties Suppliers
CommQuest GP

CommQuest GP is a non-chlorinated light to medium duty synthetic coolant. If foam has been your problem, this coolant is the ideal solution for your shop. CommQuest GP is safe to use on ferrous metals, is non-staining to copper, brass and bronze, however it will stain aluminum. If you must machine aluminum we recommend washing it off immediately after the machining operation is completed or contact a Commonwealth Oil Corporation representative for further options when machining Aluminum. CommQuest GP shows outstanding foam control through all ranges of water hardness, even in through-the-tool delivery systems operating up to 3,000 PSI delivery pressure. This product is ideally suited for use in today’s high pressure and high velocity, fluid delivery systems. In normal use concentrations, CommQuest GP exhibits superior misting resistance that can assist in meeting today’s tougher but necessary air quality and Health & Safety requirements. CommQuest GP incorporates a very effective rust inhibitor package, and gives excellent corrosion protection, even at diluted concentrations.

Properties Suppliers
CommQuest G²

CommQuest G2 Glass Grinding Coolant is environmentally friendly, multi-functional, low foaming synthetic coolant. It is specifically formulated for glass and ceramic grinding applications. CommQuest G2 may also be used in ferrous applications that demand increased detergency and corrosion protection. CommQuest G2 offers excellent glass find settling properties. The fines resist solidification and remain free-flowing to allow for easy removal. It will provide extended sump life and superior bacterial control. CommQuest G2 is an excellent coolant for central systems where a variety of products are being produced. CommQuest G2 is formulated for in grinding and beveling of glass and ceramic operations at 4 to 10%, general metal machining (turning, milling and drilling) at 5 to 10%, grinding of ferrous material at 4 to 6%.

Properties Suppliers
CommQuest HD

CommQuest HD is non-chlorinated, fully synthetic, exceptionally low foaming, high performance, and precision production grinding and metalworking fluid designed for use on both ferrous and non-ferrous metals. CommQuest HD employs New Generation additive chemistry that allows the product to deliver both high lubricity and excellent heat extraction in a single product without compromising either benefit. CommQuest HD shows outstanding foam control through all ranges of water hardness, even in through-the-tool delivery systems operating up to 3,000 PSI delivery pressure. This product is ideally suited for use in today’s high pressure and high velocity fluid delivery systems. In normal use concentrations, CommQuest HD also exhibits superior misting resistance that can assist in meeting today’s tougher air quality standards. CommQuest HD is safe to use on most metals, and is non-staining to brass, copper, and other yellow metals. CommQuest HD incorporates a very effective rust inhibitor package, and gives excellent corrosion protection, even at diluted concentrations.

Properties Suppliers
CommQuest MPG

CommQuest MPG is a clear, clean, environmentally friendly synthetic metalworking fluid designed specifically to work in a wide variety of applications including galvanized steel. CommQuest MPG is formulated to accept maximum rejuvenation, thereby extending the service life of the coolant. Operator acceptance is very high. CommQuest MPG is formulated for use in most machining applications as well as tube mill applications on all ferrous metals. CommQuest MPG does not stain copper or galvanized steel. CommQuest MPG delivers the formulated to address health, safety and disposal concerns, excellent tramp oil rejection, stays cleaner longer, prevents smut buildup and pickup on rollers and machined surfaces.

Properties Suppliers
SYN 30

SYN 30 is a mineral oil free, oil rejecting, synthetic metal working coolant. It is designed for various grinding, and light to medium duty machining applications. It is designed for use in most grinding operations including surface, cylindrical and centre less grinding. It is also used in honing, as well as general machining applications, such as boring, turning, milling and light duty drilling operations. It is suitable for use on cast iron, low carbon and free cutting steels, alloy steels and stainless steel. It is extremely stable over a wide range of water conditions (0-400 ppm hardness), provides excellent corrosion protection and is very clean in use, reducing product usage and maintenance requirements. It is equally suitable for use in large centralised coolant systems and for small individual coolant sumps.

Properties Suppliers
SYN 70

SYN 70 is a high-performance, mineral oil free, oil rejecting synthetic metal working coolant. It is designed for difficult machining applications on ferrous alloys, nickel alloys and titanium, especially where the use of extreme pressure additives such as chlorine and sulphur, are undesirable. In machining operations such as broaching, gear cutting and gun drilling it can successfully replace EP neat cutting oils and soluble oils. It is for use in soft water as well as hard waters, and exhibits low foam and excellent stability under a wide range of conditions, so is ideal for modern high speed and feed machining operations.

Properties Suppliers
SYN 990

SYN 990 is a mineral oil, chlorine and nitrite free, synthetic metal working coolant, specially designed for grinding and light to medium duty machining of cast iron, ferrous alloys, aluminium alloys and copper alloys. It is recommended for use in soft to hard water hardness conditions and is economical and low maintenance in use, and provides exceptional sump life. It is equally suitable for use in large centralised coolant systems and for small individual coolant sumps.

Properties Suppliers
WS 8065

WS 8065 is a heavy-duty, oil-rejecting synthetic machining and grinding fluid formulated for use on ferrous metals. This unique product provides superior cooling and extreme pressure properties needed for use on high alloyed ferrous metals, such as stainless steel. This product does not contain chlorinated, sulphurized, or phosphorus containing additives or DEA. WS 8065 is fortified against attack from micro-organisms.

Properties Suppliers

1