Buy Vinylester-Resins| manufacturers | suppliers | wholesales | traders | exporters

Vinylester-Resins

#1110 Vinyl Ester Resin

#1110 Vinyl Ester Resin is formulated for maximum corrosion resistance to most fuels, vapors, and both acidic and basic chemicals. It is also heat resistant and blended for toughness. These qualities make it perfect for repairing tank linings, blistering boat hulls, as well as fabricating tough all-around parts. The properties of this resin allow it to withstand impacts and repeated flexing without developing cracks. It has a low viscosity, making it perfect for resin infusion applications. It can also be used for hand lay-up or spray applications that require excellent corrosion resistance, impact strength, and tensile elongation.

Properties Suppliers
DERAKANE 441-400

DERAKANE 441-400 epoxy vinyl ester resin is a lower styrene-content resin that has an optimised epoxy backbone and resulting superior thermal properties and corrosion resistance performance. The resin is recommended for fabricating FRP storage tanks, vessels, ducts and particularly used in chemical processing, pulp and paper operations, including chlorine dioxide bleaching towers. Equipment fabricated with this resin tolerates heavy design loads without causing failure due to resin damage. This facilitates working with large weight-bearing equipment with confidence.

Properties Suppliers
DERAKANE 470HT-400

DERAKANE 470HT-400 epoxy vinyl ester resin is a novolac-epoxy based resin, designed to provide maximum chemical resistance in combination with superior temperature performance. The resin shows outstanding resistance to strong acids, oxidizing media and organic solvents over a wide temperature range. The resin is designed for ease of fabrication using hand lay-up, spray-up, filament winding, compression molding and resin transfer molding technologies. It can be used in chimney liners, quench vessels and ducting where high temperature requirements are needed.

Properties Suppliers
DERAKANE 510 A-40

DERAKANE 510 A-40 is epoxy vinylester resin with the highest bromine content, of the DERAKANE vinylester resins, designed to provide the highest fire retardant degree without the need for adding additives (Class I under ASTM E-84) and high chemical strength. DERAKANE 510 A-40 may be used in most of the manufacturing processes in PRFV. Ideal to manufacture pipes, chimneys and chimney linings.

Properties Suppliers
DERAKANE 510 N

DERAKANE 510 N resin is a brominated novolac epoxy vinyl ester resin that offers a moderate degree of fire retardance. It is useful in hot, wet flue gas environments where thermal upsets can occur and where fire retardance is desired. It is used extensively in FRP ductwork, stacks and stack liner applications, equipment specified to handle mixtures of air and hot gases or potentially flammable and corrosive liquids, and flooring compounds where heat and/or fire retardance is required.

Properties Suppliers
DERAKANE MOMENTUM 411-350

DERAKANE MOMENTUM 411-350 is epoxy–Vinylester resin, very resistant against corrosion. It provides strength against a great variety of acids, alkalis, bleachers and organic compounds. It is used in the mining and cellulose industry. DERAKANE MOMENTUM 411-350 may also be used in applications in contact with food. Accepted by the FDA, Title 21 CFR 177.2420. Recommended for manual molding, spray and filament winding.

Properties Suppliers
DERAKANE MOMENTUM 470-300

DERAKANE MOMENTUM 470-300 is novolac epoxy vinylester resin, designed to provide exceptional mechanical properties at the highest temperatures. It has a great resistance against solvents and chemicals. DERAKANE MOMENTUM 470-300 is used for the transportation of hydrochloric acid and tank coating.

Properties Suppliers
DERAKANE MOMENTUM 510-C-350

DERAKANE MOMENTUM 510-C-350 is epoxy vinylester bromide resin offering a high flame retardant power. DERAKANE MOMENTUM 510-C-350 is very resistant against chlorine chemical corrosion and bleaching agents. The laminates manufactured with this resin comply with Class II of the ASTM E-84 regulations and have a flame expansion lower than 75. When 3% Antimony Trioxide is added, it has a flame expansion lower than or equal to 25, that is, Class I.

Properties Suppliers
DION 9100

DION 9100 is epoxy-Vinylester resin, highly resistant to acid, alkaline and oxidizing environments. Especially designed for use in manual lamination processes, spray-up, pultrusion and filament winding. It is recommended for the mining and cellulose industry.DION 9100 is having excellent chemical strength, resistant to a great variety of corrosive environments,good mechanical properties,good stability at high temperatures. Clear color and high transparency.

Properties Suppliers
DION FR 9300

DION FR 9300 is epoxy vinylester bromide resin with excellent physical properties and chemical strength. When mixed with 3% Antimony Trioxide it meets the ASTM E-84 Tubbek Test rule. DION FR 9300 is used in applications where chemical strength and flame-retardant characteristics are required.

Properties Suppliers

123