Buy Water Treatment Chemicals | Biocides | Coagulant | Oxygen Scavengers | Boiler Chemicals - WorldOfChemicals

Water-Treatment

Swemcare 9610

Swemcare 9610 is a specially formulated pulverized catalyzed product designed to scavenge dissolved oxygen present in the feed water to reduce pitting type corrosion and iron pick-up in the water system.

Properties Suppliers
Swemcare 9660

Swemcare 9660 is a traditional catalyzed, nonvolatile, inorgenic oxygen scavenger designed for use in boiler feed water system to reduce corrosion in the boiler.

Properties Suppliers
Swemcare 9667

Swemcare 9667 is a organic amine based corrosion inhibitor designed for use in boiler feed water systems to reduce corrosion in the condensate return water. Swemcare 9667 is a blend of neutralizing amines designed to neutralize the carbon dioxide to reduce the return line corrosion.

Properties Suppliers
Swemcare HP

Swemcare HP is a highly cost effective green chemistry scale inhibitor with a super-threshold agent able to stabilize a wild range of supersaturated salt solution thereby preventing precipitation on the membrane surface. Swemcare HP Typically, a dose of 2 to 3 ppm Feed water quantity. It is suggested to run Swemcare dosage selection software on regular basis for optimized dosage of chemicals.

Properties Suppliers
Swemcare INL

Swemcare INL solutions should be made up with chlorine free water to give a 3- 4% in proportion to total volume of the cleaning system (Including the volume of the pressure vessel and pipe lines) Circulate the prepared solution at the following flow rate or as recommended by the membrane manufacturer depending on the membrane size for at least for 1hr.

Properties Suppliers
Swemcare MP

Swemcare MP is developed specifically for use with high silica and iron waters and is a synergistic blend of threshold antiscalants and dispersants designed to reduce precipitation of scale premature membrane failure of membranes system. Swemcare MP is compatible with vinyl, polyethylene, PVC, Hypalon, Viton, Teflon, polypropylene, HDCL and BPDM, Brass, steel, 304 stainless steel, 316 stainless steel, neoprene, Buna-N and polyurethane.

Properties Suppliers
Swemcare OGL

Swemcare OGL solutions should be made up with chlorine free water to give a 3-4% in proportion to total volume of the cleaning system (Including the volume of the pressure vessel and pipe lines) Circulate the prepared solution by maintaining the pH 11.0-11.5 at the following flow rate or as recommended by the membrane manufacturer depending on the membrane size for at least for an hour. It may be necessary to soak the membranes with Swemcare OGL for 4-6 hours or longer for heavily fouled membranes.

Properties Suppliers
Swemcare SP

Swemcare SP is developed specifically for use with high fluoride containing water and is asynergistic blend of threshold antiscaliants and dispersants designed to reduce precipitation of scale premature membrane failure of membranes systems SW 416 is designed to handle up to 5.0mg/l of CaF at pH 7.5.

Properties Suppliers
Tacelene Chem 1040

Tacelene chem 1040 is a synergistic blend of inorganic and organic chemicals designed for the control of corrosion and scale in low and medium pressure boilers.

Properties Suppliers
Tacelene Chem 11003

Tacelene Chem 11003 polymer is a general purpose scale inhibitor as it is effective to prevent scale building in inhibiting precipitation and deposition of calcium carbonate, calcium oxalate, calcium sulfate, barium sulfate, and other low solubility salts.

Properties Suppliers