Buy Oil Additives | Engine oil additives | Petroleum additives

chemical-categories

KCL Technical 95 percent Min KCL

We offer POTASSIUM CHLORIDE  any large quantity at competitive price with prompt

shipment on Spot/Contract Basis, with guaranteed quality with Intertek Inspection

 

Now, we have a very competitive Price for POTASSIUM CHLORIDE

 

chemical name : potassium chloride

molecular formula:  kcl

potassium as k2о % Min: 60.00

purity (as kcl)% Min: 96.00

insoluble %: 0.20

Moisture % Max:  0.60 %

sodium (na) %: 0.90

magnesium (mg) %: 0.12

heavy metals: < 3 ppm

solubility in water at 20 ° c:  350 g/ lt

acid: neutral

 

Origin: South America

Shipment Prompt

Supply Capacity: 40000 Metric Tons Per Month

Inspection By Intertek

Packing: Big Bags or 50 kgs Bags

 

SOUTHEAST ASIA IMPEX

Mumbai (Bombay)  IN

Suppliers
Sorbitan Mono Oleate Industrial Grade

Lubricity additive, lipophilic surfactant, application in oil field chemicals

2-Acrylanmido-2-methylpropanesulfonic acid

Chemical Reagent CF410S Dispersant SAF based<356F Summary 1. CF410S Dispersant can significantly reduce cement slurry consistency, improve liquidity and rheolog- ical behavior of cement slurry. 2. CF410S Dispersantis applicable in a wide temperature range and can be resistant to 356?F (180?C). 3. CF410S Dispersant has salt resistence and still has good performance in 5%-10% brine cement slurry. 4. CF410S Dispersant is suitable for dry mixed as well as water mixed, soluble in cold water. 5. CF410S Dispersant is compatible with cement and other additives well. Special Attentions The performance of CF410S Dispersant will be obviously decreased when DISPERSANT CF410S is used in brine system, whose concentration is higher than that of the half saturated brine. Applications Temperature:Lower than 356?F (180?C) (BHCT) Dosage: CF410S Dispersant generally 0.2-2.0% (BWOC), recommend amount 0.5% (BWOC). Cement Slurry Performance Item Technical Indicators Rate of the thickening time (ratio of additive added and non-added) 85?C/44min, 70.3MPa 1.0-1.2 Rate of 24h compressive strength (ratio of additive added and non-added) 85?C,Atmospheric Pressure ? 0.80 Rheological Property Rheological index n 85?C, Atmospheric Pressure ?0.55 Consistency coefficient k, Pa.S^n ? 0.50 Composition:API class G (HSR) 700g; mixed water 308g; CF410S 3.5g(0.5%); defoamer 1.4g(0.2%)

Suppliers
Oilfield Cement Additive Dispersant by Midas IP

MID-C203/MID-C203L is a cement friction-reducing additive which will reduce the apparent viscosity and improve the rheological properties of cement slurry. The improved rheological properties result in reduced frictional pressures during pumping, and turbulent flow can be achieved at lower pumping rates. With a reduction in a slurry’s apparent viscosity, the slurry can be mixed at a higher density than normal by reducing the mixing water, and the slurry is still pump able.

 

- Ready mixed concrete

- Underwater concrete

- Self-compacting concrete

- High strength concrete for dam, bridge and high-rise building

- Concrete secondary products such as precast concrete and concrete pile

- Fly ash concrete, blast furnace slag concrete

- Lightweight concrete

Suppliers
1,3,5-Triazine-1,3,5(2H,4H,6H)-triethanol 80 Technical 80%

H2S scavengers can provide successful treatment in a wide range of applications:
· H2S removal from gas streams
· H2S removal from sour hydrocarbon liquids (condensate and NGL streams)
· H2S reduction in sour liquid tank vapor spaces
Benefits to you:
· Improved environmental, health and safety compliance
· Maximized throughput while increasing production efficiency
· Improved water quality by preventing FeS generation, an agent know to cause sheen in discharged produced water
· Improved injectivity by eliminating FeS from produced water, an agent known to cause plugging
· Improved operational reliability

Suppliers

12
www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X