Adhesive | Sealant chemicals manufacturers | Adhesive Chemicals Suppliers

chemical-categories

ARDEX D 20

ARDEX D 20 is used in dry internal locations for fixing ceramic tiles and mosaics on gypsum plaster, paper faced-boards, concrete, cement and sand renders, rigidly braced and stable sheets and plywood, chipboard, fibre building boards and other absorbent backgrounds, as well as fixing porous tiles to existing ceramic tiling. It is suitable for use in domestic showers and bathrooms on appropriate backgrounds.ARDEX D 20 adhesive is applied to give a uniform coating on the area being tile.

Properties Suppliers
ARDEX S 21

ARDEX S 21 is a special rapid hardening, pourable bedding mortar for floor tiles in internal and external locations. It is especially suitable for fixing large tiles, ceramic and brick pavers, terrazzo tiles and natural stones. Tiles bedded in ARDEX S 21 can be grouted and subjected to loads 3 hours after fixing at normal temperatures. It is particularly suitable for use in situations where the tiling has to be grouted and put into use shortly after bedding, or where low temperatures would unduly extend the setting time of normal cement-based adhesives.ARDEX S 21 is a grey powder based on special cements, high quality synthetic resins and fillers,which is mixed with water to produce an easily applied mortar.ARDEX S 21 contains a reducing agent to control the level of Chromium VI when mixed prior to use.

Properties Suppliers
ARDEX S 48

ARDEX S 48 Portland cement-based adhesive that is highly modified with powdered polymers for high bond strength and flexibility. When mixed with water,it has a creamy smooth consistency that is similar to ready-to-use tile adhesives.ARDEX S 48 bonds to all common substrate surfaces, including wood and plastic laminates, and is suitable for use in bathrooms and kitchens.ARDEX S 48 adheres to dry substrates that are structurally sound, solid, and free from any contaminant that can act as a bond breaker.

Properties Suppliers
ARDEX X 32

ARDEX X 32 Natural Stone Adhesive is a special rapid hardening and drying, cement based adhesive for fixing natural stone floor and wall tiles including moisture sensitive natural stone tiles and un calibrated natural stone floor tiles. It may also be used for concrete slabs and ceramic tiles including porcelain tiles in internal and external situations.

Properties Suppliers
Altibright

Altibright is high brightness, asbestos free, platy functional fillers/extenders developed for diverse industrial applications.

Properties
Ardex D 15

ARDEX D15 is an easy to apply, ready mixed wall tile adhesive for ceramic and mosaic tiles. Suitable for use in domestic showers and bathrooms on appropriate backgrounds, in dry, internal locations, for fixing ceramic tiles and mosaics on gypsum plaster, paper faced boards, concrete, cement and sand renders, as well as fixing porous tiles to existing ceramic tiling.

Properties Suppliers
Ardex D 30

Ardex D 30 is a water resistant, non-slip ready mixed wall tile adhesive. The BS EN 12004 D2 TE designation for ARDEX D 30 classifies the adhesive as an" improved dispersion adhesive with additional characteristics, reduced slip and extended open time". The additional characteristics for ARDEX D 30 determined in accordance with BS EN 12004 are a high adhesion strength after water immersion and a high adhesion strength after exposure to elevated temperatures making this product ideal for use in commercial and domestic showers, kitchens and bathrooms.

Properties Suppliers
Ardex S 16

Ardex S 16 is a grey powder based on special cements, high quality synthetic resins and fillers, which is mixed with water to produce a slump free, easily applied mortar with a working time of approximately 30 minutes. It is particularly suitable for use in situations where the adhesive bed has to dry quickly or the tiling has to be grouted and put into use shortly after fixing.

Properties Suppliers
Ardex X 77

ARDEX X 77 is a high performance, fibre reinforced,polymer modified wall and floor tile adhesive, which has been specially formulated with Microtec Technology to give exceptional properties of adhesion. ARDEX X 77 is ideal for fixing all types of tiles including fully vitrified, porcelain, mosaics and non-moisture sensitive natural stone tiles. ARDEX X 77 contains Microtec Technology which greatly improves the adhesion strength, plus increases the ability of the mortar to be more capable of withstanding stress and shear strain. ARDEX X 77 is suitable for use in both internal and external applications and is especially suited to high performance situations with heavy pedestrian traffic e.g. shopping centres. ARDEX X 77 accommodates shrinkage movement associated with early age concrete and screeds. It can be used over concrete that is at least 7 days old and screeds and renders after 16 hours. ARDEX X 77 is efflorescence free due to the addition of special additives. ARDEX X 77 is also ideal for use in wet areas and swimming pools. ARDEX X 77 can be modified with the addition of ARDEX E 90 to give improved deformability (S2) and water repellent qualities.

Properties Suppliers
Arkon M 90

Arkon M 90 is used as a Sealants, hot-melt adhesives, pressure sensitive adhesives.

Properties Suppliers

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X