Adhesive | Sealant chemicals manufacturers | Adhesive Chemicals Suppliers

chemical-categories

ARDEX AF 700

ARDEX AF 700 is a water-based, low odour, solvent free, synthetic resin/rubber emulsion-based linoleum adhesive containing a blend of high quality dispersions, mineral fillers and water. It is odourless when dry and has excellent wet grab and an exceptionally long tack time, with very good early and long term adhesive strength. ARDEX AF700 is designed for sub-floors such as levelled and smoother concrete and sand/cement screeds, latex and water-based levelling and smoothing compounds, terrazzo, plywood, hardboard and flooring grade chipboard. ARDEX AF 700 has been specially formulated to provide excellent long term shear strength to compliment the properties of linoleum sheet and tile floor coverings. ARDEX AF 700 also has significantly improved moisture resistance compared to traditional lignum paste type adhesives. ARDEX AF 700 is also suitable for use over normal under floor heating system.

Properties Suppliers
ARDEX AF 890

ARDEX AF890 is a water-based, low odour, solvent free, acrylic polymer, emulsion-based surface tackifier containing a blend of high quality dispersions and water. It is odourless when dry and has a short drying time and permanent tack. ARDEX AF890 is also suitable for use over normal underfloor heating systems. It is designed for adhering floor coverings with felt, bitumen, PVC and other polymer backings and is ideal for carpet tiles, flooring, concrete, sand/cement screeds, latex and water-based levelling and smoothing compounds, terrazzo, plywood, hardboard and flooring grade chipboard.

Properties Suppliers
ARDEX C 2

ARDEX C2 is suitable for grouting wall or floor tile joints from 2mm to 20mm wide.ARDEX C2 powder, when mixed with water, produces a soft, creamy, easily worked mortar with good filling properties, enabling deep joints to be filled in one operation. The hardened grout is weather resistant, unaffected by water and is suitable for internal and external use in dry or wet conditions, including swimming pools with non-aggressive water conditions.ARDEX C 2 contains a reducing agent to control the level of Chromium VI when mixed prior to use.

Properties Suppliers
ARDEX D 20

ARDEX D 20 is used in dry internal locations for fixing ceramic tiles and mosaics on gypsum plaster, paper faced-boards, concrete, cement and sand renders, rigidly braced and stable sheets and plywood, chipboard, fibre building boards and other absorbent backgrounds, as well as fixing porous tiles to existing ceramic tiling. It is suitable for use in domestic showers and bathrooms on appropriate backgrounds.ARDEX D 20 adhesive is applied to give a uniform coating on the area being tile.

Properties Suppliers
ARDEX FA 20

ARDEX FA 20 is an advanced fibre reinforced smoothing and levelling compound featuring MICROTEC technology that is designed to rapidly smooth and level existing substrates prior to applying a floor finish. ARDEX FA 20 can be applied to timber floors, flooring grade asphalt and existing substrates with adhesive residues. ARDEX FA 20 can be applied on all common sub-floors such as concrete, cement/sand screeds, flooring grade asphalt, timber and chipboard, quarry tiles, existing sub-floors with sound adhesive residues. ARDEX FA 20 may also be used for smoothing and levelling timber floors prior to applying ceramic tiles.

Properties Suppliers
ARDEX GK

ARDEX GK is a cement-based grout for floor and wall tiling, available in grey or anthracite. ARDEX GK has rapid setting and hardening properties and is particularly suitable for grouting ceramic tile joints that have to be exposed to foot traffic within a few hours. ARDEX GK can be used with ARDEX E 101 mortar admix to produce a mortar with elastic and water repellent properties as well as improving adhesion.ARDEX GK contains a reducing agent to control the level of Chromium VI when mixed prior to use.

Properties Suppliers
ARDEX S 16 W

ARDEX S 16 W classifies the adhesive as an improved fast setting cementitious adhesive with additional characteristics and reduced slip in accordance with BS EN 12004.ARDEX S 16W is a special, white, rapid hardening and drying, cement-based adhesive for fixing ceramic and natural stone floor and wall tiles, mosaics, etc., in internal situations. ARDEX S 16W is especially suitable for fixing translucent tiles and glass mosaics, limestone, marble, porcelain and fully vitrified tiles.ARDEX S 16 W is ideal where the tiling has to be grouted and put into use shortly after fixing.It is particularly suitable for use with natural stone tiling in situations where the adhesive bed has to dry quickly and where residual moisture remaining with a normal adhesive could cause efflorescence and water staining marks with some natural stone tiles.ARDEX S 16 W is not recommended for fixing tiles in swimming pools, external locations.

Properties Suppliers
ARDEX S 21

ARDEX S 21 is a special rapid hardening, pourable bedding mortar for floor tiles in internal and external locations. It is especially suitable for fixing large tiles, ceramic and brick pavers, terrazzo tiles and natural stones. Tiles bedded in ARDEX S 21 can be grouted and subjected to loads 3 hours after fixing at normal temperatures. It is particularly suitable for use in situations where the tiling has to be grouted and put into use shortly after bedding, or where low temperatures would unduly extend the setting time of normal cement-based adhesives.ARDEX S 21 is a grey powder based on special cements, high quality synthetic resins and fillers,which is mixed with water to produce an easily applied mortar.ARDEX S 21 contains a reducing agent to control the level of Chromium VI when mixed prior to use.

Properties Suppliers
ARDEX S 48

ARDEX S 48 Portland cement-based adhesive that is highly modified with powdered polymers for high bond strength and flexibility. When mixed with water,it has a creamy smooth consistency that is similar to ready-to-use tile adhesives.ARDEX S 48 bonds to all common substrate surfaces, including wood and plastic laminates, and is suitable for use in bathrooms and kitchens.ARDEX S 48 adheres to dry substrates that are structurally sound, solid, and free from any contaminant that can act as a bond breaker.

Properties Suppliers
ARDEX WA

ARDEX WA is a solvent free, epoxide resin-based thin bed adhesive and grouting compound, for use where chemical resistance is required or where cement-based grouts are inappropriate. ARDEX WA is suitable for fixing and grouting all types of ceramic tiles, glass and ceramic mosaics in internal and external situations. When fully cured, the ARDEX WA mortar provides a decorative, waterproof, weather and frost resistant joint from 2-12mm wide that is chemically resistant.ARDEX WA is especially suitable for use in swimming pools, showers, bathrooms, shops, abattoirs, dairies,hospitals, hydrotherapy and spa baths, sports centres and other specialised buildings where high standards of hygiene and cleanliness are required.

Properties Suppliers

1...34567...87