Adhesive | Sealant chemicals manufacturers | Adhesive Chemicals Suppliers



Solfre1 is a one component polyurethane adhesive suitable for a range of industrial applications. It has the following benefits such as moisture cure, variety of working times, it is a cold press adhesive and further no specialist storage requirements required. It can be applied manually or automatically by rolling, beading or spraying.

Properties Suppliers

Solfre2 is a two component polyurethane adhesive that offers a unique alternative to epoxies, one part polyurethanes, solvented adhesives and hot melts. There is no moisture requirement for curing, therefore cure times are not affected by humidity or moisture. It can significantly reduce costs throughout the production process.

Properties Suppliers

ARDEX GK is a cement-based grout for floor and wall tiling, available in grey or anthracite. ARDEX GK has rapid setting and hardening properties and is particularly suitable for grouting ceramic tile joints that have to be exposed to foot traffic within a few hours. ARDEX GK can be used with ARDEX E 101 mortar admix to produce a mortar with elastic and water repellent properties as well as improving adhesion.ARDEX GK contains a reducing agent to control the level of Chromium VI when mixed prior to use.

Properties Suppliers

ARDEX WA is a solvent free, epoxide resin-based thin bed adhesive and grouting compound, for use where chemical resistance is required or where cement-based grouts are inappropriate. ARDEX WA is suitable for fixing and grouting all types of ceramic tiles, glass and ceramic mosaics in internal and external situations. When fully cured, the ARDEX WA mortar provides a decorative, waterproof, weather and frost resistant joint from 2-12mm wide that is chemically resistant.ARDEX WA is especially suitable for use in swimming pools, showers, bathrooms, shops, abattoirs, dairies,hospitals, hydrotherapy and spa baths, sports centres and other specialised buildings where high standards of hygiene and cleanliness are required.

Properties Suppliers

ASCONIUM has developed a new generation of anti-corrosion additives liquids. It improves adhesion, resistance to water, brightness.


ASCOTRAN provide an excellent water resistance to the paint layer.


Altiplus functional fillers/extenders are used in compounding powder coatings master batches that are based on: polyurethane, PVC & vinyl based resins, polystyrene and phenolic. Altiplus products are suitable pitch control agents, trapping residual resins that cause blemishes in paper sheets.


Araldite adhesive covers a broad range of applications and offers both production and performance benefits to industrial, consumer and construction markets.

Properties Suppliers
Ardex Mg

Ardex Mg is suitable for grouting natural stone or marble wall or floor tile joints up to 8mm wide. The ARDEX MG powder, when mixed with water, produces a soft, creamy, easily worked mortar with good filling properties, enabling deep joints to be filled in one operation.

Properties Suppliers

1...56789...90 uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X