Adhesive | Sealant chemicals manufacturers | Adhesive Chemicals Suppliers

chemical-categories

TAMMSFLEX NS

TAMMSFLEX NS is a non-sag gun grade sealant designed for use in vertical and non-traffic bearing horizontal joints subject to expansion resulting from temperature changes. It is used for all normal construction joints such as panel and curtain wall construction, copings, masonry joints, bridge abutments and building joints. It is formulated for use in joints subject to long term contact with water and may be used in water reservoirs, dams and foundation joints.

Properties Suppliers
TECBOND 246-12 CLEAR HOT MELT

TECBOND 246-12 CLEAR HOT MELT is a very high performance adhesive for use on painted, some varnished and other smooth surfaces. The product has a medium open time and its high viscosity makes it suitable for gap filling and porous substrates. It comes in either black or clear, and is suitable for use with any 12mm TEC Glue guns.

Properties Suppliers
TECHSEAL 280

Techseal 280 two-part pouring grade sealant is formulated from a blend of epoxy and urethane polymers. The mixed sealant is self leveling and can be poured directly into horizontal joints to form a tough resilient seal possessing a limited degree of flexibility. Techseal 280 is available in a range of attractive colours with a separate colour pack providing visual mixing control.

Properties Suppliers
TECHSIL CYANOACRYLATE GEL

TECHSIL CYANOACRYLATE GEL is a fast curing, very high viscosity ethyl cyanoacrylate based adhesive. The new formulation shows greater surface insensitivity thus allowing faster bonding of all substrates and improved performance on wood, card and metals. The new gel formulation exhibits improved thixotropic behaviour and uniform appearance. It is specially formulated for high strength, general purpose bonding of most metals, wood, card, plastics, rubbers, leather, fabrics and other common substrates. It is suitable for use on vertical and over-head surfaces as it will not drip or slump.

Properties Suppliers
TECHSIL PLASTIC & RUBBER CYANOACRYLATE

TECHSIL PLASTIC & RUBBER CYANOACRYLATE is a low-medium viscosity modified ethyl cyanoacrylate adhesive. It is suitable for bonding a very wide range of materials, including some porous ones, where very fast cure speed is required. It is specially formulated for the bonding of plastics, rubbers, wood, metals and other common substrates. The product is recommended for use on close-fitting parts and smooth, even surfaces.

Properties Suppliers
TECHSIL UNIVERSAL CYANOACRYLATE

TECHSIL UNIVERSAL CYANOACRYLATE is a medium viscosity modified Ethyl Cyanoacrylate adhesive. It is suitable for bonding a very wide range of materials, including some porous ones, where a fast cure speed is required. It is specially formulated for the bonding of plastics, rubbers, wood, paper, leather, metals and other common substrates. It relies on surface moisture for cure speed than standard cyanoacrylates. It is recommended for use on close-fitting parts and fairly smooth, even surfaces.

Properties Suppliers
THIXON 305

THIXON 305 is a solvent-based one-coat adhesive for bonding silicone compounds to metal during vulcanization. It adheres to hot and cold rolled steel, stainless steel, aluminum, brass, as well as thermoplastics such as polyamides and polyesters. It can be used with all common molding and curing methods. Cure temperatures between 120°C and 200°C are recommended.

Properties Suppliers
THIXON 406

THIXON 406 is a one-coat bonding agent used for bonding castable polyurethane elastomers to metal. It is also suitable for bonding thermoplastic polyurethanes to metal. It should only be used for bonding castable polyurethanes where the curing temperatures are greater than 75°C to 80°C. It adheres to hot and cold rolled steel, stainless steel, aluminum, brass as well as thermoplastics such as polyamides and polyesters.

Properties Suppliers
THREEBOND TB1303

THREEBOND TB1303 is an anaerobic reactive adhesive/sealant which has been specially developed for locking and sealing threaded parts and fittings with high strength when cured. It cures spontaneously when sealed off from contact with the air between close fitting metallic surfaces. It also eliminates mechanical locking parts such as spring or toothed washers, nylon nuts etc. Typical Applications are to permanently lock and seal stud bolts, various nuts, bearings, gears and pulleys that will not require subsequent dis-assembly.

Properties Suppliers
THREEBOND TB1796B

THREEBOND TB1796B is an accelerator specially developed for cyanoacrylate adhesives. It reduces the setting time, enables porous surfaces such as wood, leather etc. to be bonded, and reduces whitening (blooming). It is a amine-based compound with light yellow/ transparent in appearance.

Properties Suppliers