Make your products visible globally with Elite Membership.
I agree to the terms and conditions
Existing User?
Sign In with Email
Remember Me Forgot Password?
New User?
Enter your registered Email ID to get reset password.
Elite Member
Individual Register
Butyl Methacrylate is a base material for coatings and adhesives. It is used in resins, solvent, coatings, adhesives, oil additives, dental products, textile emulsions, leather and paper finishing.
C5 Petroleum Resin is used for adhesive applications especially for hot-melt adhesive,pressure-sensitive adhesive and sealants.
Dibutyl phthalate (DBP) is a commonly used plasticizer. It is also used as an additive to adhesives or printing inks.
Diisononyl maleate is used in the preparation of the endcap precursor in sealants; unsaturated ester that finds use as a co-monomer.
Flexiprene PSI-952 is a moisture-curing polyurethane joint sealant capable of compensating for movement of ±25% for sealing horizontal joints of dissimilar porosities, surface textures and coefficients of expansion. It cures to a flexible rubber capable of supporting foot traffic and light, vehicular traffic. It has excellent adhesion to most common firm and uncontaminated materials. It is used for factory and institutional joints and joints in plaza and mall parking decks, pavements and driveways.
LA 4009EU Adhesive has been formulated to be in compliance with the European regulation “Reach” which prohibits the use of Toluene. This is a Toluene free adhesive system that has proven to be especially useful in the fabrication of inflated systems made from either Polyurethane (PU) or Polyvinyl Chloride (PVC) coated fabrics. It exhibits high initial bond strength and quickly cures to high strength, heat resistant final bond. Its solvent blend is especially compounded to minimize solvent attack on thin fabrics.
Marine-Tex FlexSet is a non-sagging, non-shrinking, permanently flexible epoxy adhesive.
Microcheck MZ BT20 is serves as an adhesive,and as preservative in starch and natural gum,aqueous inks. It is specilized microbiocides for leather treatment and leather chemicals.
N-Vinylpyrrolidone is commonly used as a reactive diluent in ultraviolet and electron-beam curable polymers applied as inks, coatings or adhesives.It is the precursor to polyvinylpyrrolidone.
PRC Rapid Seal 652 is a non-sag flexible fuel resistant sealant intended for use in chemical storage tanks where there will be exposure to a variety of chemicals such as gasoline, crude oil or ethanol. Other uses are in the chine areas of the tanks to prevent water migration between the steel and concrete base. It is a two-part manganese dioxide cured polysulfide compound. The material can be applied to most typical vertical or overhead joints without sagging. It cures at room temperature to form a resilient sealant having excellent adhesion to steel and concrete.
Stay updated with the latest chemical industry trends and innovations.
Verification Code has been sent to
Please enter the Verification Code below to verify your Email Address.If you cannot see the email from "noreply@worldofchemicals.com" in your inbox,make sure to check your SPAM Folder