Make your products visible globally with Elite Membership.
I agree to the terms and conditions
Existing User?
Sign In with Email
Remember Me Forgot Password?
New User?
Enter your registered Email ID to get reset password.
Elite Member
Individual Register
Bitoner Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. It has recommended applications in sealants, coatings, ink, pressure sensitive adhesives, and hot melt adhesives.
Sodium hydroxide (NaOH), also known as lye and caustic soda, is a caustic metallic base. It is used in many industries, mostly as a strong chemical base in the manufacture of pulp and paper, textiles, drinking water, soaps and detergents and as a drain cleaner. Pure sodium hydroxide is a white solid; available in pellets, flakes, granules and as a 50% saturated solution. It is hygroscopic and readily absorbs water from the air, so it should be stored in an airtight container. It is very soluble in water with liberation of heat.
Elastosil® 76540 A/B is a two-part, non-slump, room temperature vulcanizing silicone rubber showing an outstanding oil resistance and an excellent primerless adhesion on polyamide and aluminum.
Ethyl1-propenyl ether is used in organic synthesis. It is also used in coating, adhesive, additives, plasticizer, etc.
Isobutyl Methacrylate is a base material for coatings and adhesives. It is used in resins, solvent, coatings, adhesives, oil additives, dental products, textile emulsions, leather and paper finishing.
LA 4009NOVOC Adhesive is a VOC free version of LA4009. This adhesive has proven especially useful in the fabrication of inflated systems. It exhibits high initial bond strength and quickly cures to high strength, heat resistant final bond. LA 4009NOVOC's solvent blend is especially compounded to minimize solvent attack on thin fabrics.
N,N-Dimethylformamide is used as a solvent with low evaporation rate.It is used in the production of acrylic fibers and plastics. It is also used as a solvent in peptide coupling for pharmaceuticals, in the development and production of pesticides, and in the manufacture of adhesives, synthetic leathers, fibers, films, and surface coatings.
Trimellitic Anhydride is used in the production of resins for electrode-position and powder coatings, and as a binder for glass fibres, and other aggregates. It is used as an embossing agent for vinyl flooring and as a curing agent for epoxy resins. It is also used as an intermediate for the synthesis of surface coatings chemicals, adhesives, polymers, dyes printing inks, pharmaceuticals and agrochemicals.
Troysan Polyphase Af1 is used as an fungicide in cutting oils, textiles, paper cutting, adhesives.
Chlorinated paraffins (CPs) are a complex group of manmade compounds, primarily used as coolants and lubricants in metal forming and cutting. They also are used as plasticizers and flame retardants in rubber, paints, adhesives, sealants and plastics.
Stay updated with the latest chemical industry trends and innovations.
Verification Code has been sent to
Please enter the Verification Code below to verify your Email Address.If you cannot see the email from "noreply@worldofchemicals.com" in your inbox,make sure to check your SPAM Folder