Admixtures suppliers, manufacturers, exporters - worldofchemicals.com

chemical-categories

MasterGlenium ACE 30

MasterGlenium ACE 30 is an admixture of a new generation based on second-generation polycarboxylic ether polymer with high earlystrength gains.MasterGlenium ACE 30 is free of chloride & low alkali. It is compatible with all types of cements.MasterGlenium ACE 30 is suitable for making precast concrete elements at all workability’s including Rheoplastic or Super workable concrete having fluid consistence, no segregation, a low water binder ratio and,consequently high early and long term strengthsMasterGlenium ACE 30 reduces water content drastically ( > 35%) and helps achieve very high early strength, mainly for Precast Concrete.

Properties Suppliers
MasterGlenium SKY 8233

MasterGlenium SKY 8233 is an admixture of a new generation based on modified polycarboxylic ether. MasterGlenium SKY 8233 product has been primarily developed for applications in high performance concrete where the highest durability and performance is required.MasterGlenium SKY 8233 is free of chloride & low alkali. It is compatible with all types of cements.MasterGlenium SKY 8233 helps to produce high performance concrete with longer workability retention, and high early strength. Mostly compatible with all OPC, PPC, PSC and can be used with high pozzolonic material.

Properties Suppliers
MasterGlenium SKY 8276

MasterGlenium SKY 8276 is the superplasticiser based on second generation polycarboxylic ether polymers, developed using nano-technology. MasterGlenium SKY 8276 product has been primarily developed for applications in high performance pre-cast concrete to facilitate high early strength gains with super slump retention.MasterGlenium SKY 8276 is used for the production of high quality ready-mix concrete.MasterGlenium SKY 8276 may be used in combination with MasterMatrix 2 (formerly known as GLENIUM STREAM 2)for producing Rheodynamic concrete, capable of self compaction,even in the presence of dense reinforcement. MasterGlenium SKY 8276 helps to produce high performance concrete with longer workability retention, and high early strength. Mostly compatible with all OPC, PPC, PSC and can be used with high pozzolonic material.

Properties Suppliers
MasterLife CNI

MasterLife CNI is a calcium nitrite based corrosion-inhibiting admixture for steel reinforced concrete. MasterLife CNI helps in minimising and delays corrosion of steel reinforcement and improves structure life. It provides effective corrosion protection against chlorides in concrete,extends the service life of reinforced concrete structures,set acceleration, which may be desirable in cold weather applications.

Properties Suppliers
MasterMatrix 2

MasterMatrix 2 is a ready-to-use, liquid, organic, viscosity-modifying admixture (VMA) specially developed for producing concrete with enhanced viscosity and controlled rheological properties.MasterMatrix 2 admixture exhibits superior stability and controlled bleeding characteristics, thus increasing resistance to segregation and facilitating placement.MasterMatrix 2 improves viscosity of concrete which helps to make itself consolidated and also to get anti wash out properties. MasterMatrix 2 shows increased viscosity & thixotropic properties,improved stability during transport & placing,controlled bleeding,reduced segregation, even with highly fluid mix,enhanced pumping and finishing,reduced sagging-dimensional stability.

Properties Suppliers
MasterPel 707

MasterPel 707 is a liquid admixture for concrete to achieve high resistance to water ingress. It is based on a blend of surface active agents and refined lignosulphonate. MasterPel 707 should be used in all structural concrete that is constantly or intermittently in contact with water such as sea walls, tunnels, basements, structural and pre-cast concrete in exposed superstructures. MasterPel 707 can also be used as waterproofing cum plasticizing admixture for cement mortars and plasters.MasterPel 707 produces water tight concrete by capillaries breaking technics.

Properties Suppliers
MasterRoc SA 160

MasterRoc SA 160 admixture is a high-performance alkali-free shotcrete accelerator for use in the wet-mix spraying process. It is a liquid additive whose dosage can be varied to the desired setting and hardening times. MasterRoc SA 160 admixture meets the requirements of ASTM C 1141/C 1141M, Types I /II, Grade 9, Class A.

Properties Suppliers
MasterSet AC 100

MasterSet AC 100 is ready to use liquid accelerating admixture for use in concrete and portland cement. MasterSet AC 100 admixture brings down setting times in general and specially under cold weather, leading to early high and ultimate increased strengths. In addition, it reduces bleed and segregation while improves workability. MasterSet AC 100 does not contain any added chloride ions ensuring that the product does not contribute to the corrosion of reinforcing steel. In fact studies indicate MasterSet AC 100 helps in reduction of chloride attack on concrete. MasterSet AC 100 is formulated for use as accelerator to facilitate high early and higher ultimate strengths in concrete.

Properties Suppliers
MasterSet RT 55

MasterSet RT 55 is a powerful retarder and auxiliary plasticiser which disperses and deflocculates cement particles whilst delaying the hydration process, thereby retarding the initial and final set. MasterSet RT 55 can be used to improve workability without the addition of extra water, or to allow reductions in the free water content in conjunction with high range water reducing agents.MasterSet RT 55 is used for extended workability retention of high strength, low W/C ratio mixes, white cement concrete, slipformed concrete. It increases density of concrete reducing, allows a reduction in free water. MasterSet RT 55 is highly effective in high cement content low water cement ratio mixes where its use enables concrete to be made more workable without loss in strength, density and durability.

Properties Suppliers
SODIUM NAPHTHALENE SULFONATE--SNF

Sodium Naphthalene Sulphonate (FDN-A)  is made of naphthalene, sulfonic acid, formalin and alkali, through sulphuration, hydrolyzation, condensation and neutralization reaction. FDN contains no chloride. Thus, it meets the requirements of chemical admixture specifications for concrete: ASTM Designation C 494 as a Type F admixture, GB8076-1997 and GB50119-2003.

vicky

Mobile: 0086-18162818098 (what's app is ok)

wechat: Lignosulphonate

skype: missorange29

email: yongchemical@yahoo.com

website:www.yongchemical.com

Properties Suppliers