Boiler water treatment chemicals – directory, manufacturers, suppliers, traders

chemical-categories

Accotreat B600

Accotreat B600 is a scale and sludge inhibitor designed primarily for steam boilers to prevent build-up of deposits of hardness or of iron and other metallic oxides originating from corrosion of condensate systems.

Properties Suppliers
Accotreat B960

Accotreat B960 is a concentrated blend of sequestering and dispersing agents for the removal of scale deposits, iron oxide and other metallic oxides in boiler water systems. It is particularly suitable for systems where iron and other metallic oxides originating from corrosion of condensate systems poses a problem in maintaining a clean boiler.

Properties Suppliers
Acriflow UL-230

Acriflow UL-230 is the sodium salt of polyacrylic acid of low molecular weight. It is used as a dispersant and suspending agent in industrial processes and applications.

Properties Suppliers
Acumer 1000

Acumer 1000 is a low molecular weight polyacrylate with a selected molecular weight around 2000 to optimize the anti-scale performance through solubility enhancement by threshold effect, which reduces precipitation of low solubility inorganic salts, crystal modification, which deforms the growing inorganic salt crystal to give small, irregular, readily fractured crystals that do not adhere well to surfaces and can be easily removed during cleaning operations, dispersing activity, which prevents precipitated crystals or other inorganic particles from agglomerating and depositing on surfaces. Acumer 1000 is effective to inhibit precipitation of calcium carbonate, calcium oxalate, calcium sulfate, barium sulfate, and other low solubility salts.

Properties Suppliers
AquaTreat 9310

AquaTreat 9310 is a specially formulated product for use in steam raising plant. It is most suitable for large installation. AquaTreat-9310 provides rapid oxygen scavenging to minimize corrosion. It is normally dosed so as to maintain 30-70 mg/l sulphite reserves in the boiler water.AquaTreat-9310 will absorb oxygen from the atmosphere and therefore no more than one day supply should be available in an open dilution tank.

Properties Suppliers
AquaTreat 9450

AquaTreat 9450 is based on catalyzed sulphite, anti-precipitants, sludge conditioners, alkalinity builder and an organic multifunctional tannin based product. AquaTreat 9450 combines the functions of rapid oxygen scavenging, deposition control and alkalinity control in a single, stable product. AquaTreat 9450 should be dosed continuously into the feed.

Properties Suppliers
AquaTreat-9002

AquaTreat-9002 is an alkalinity builder. It also contains organic dispersants and antifoam. AquaTreat-9002 is used for imparting alkalinity to boiler water or for correcting the pH of low alkalinity waters. AquaTreat-9002 is applied to maintain the boiler water alkalinity within limits to be established by WEX, to suit the operating conditions. AquaTreat-9002 may be injected using a dosage pump, dosage pot or directly into the feed tank (whichever is appropriate to the particular plant). AquaTreat-9002 Reduces acid corrosion, Stabilizes protective films, Provides alkalinity control, Reduces foaming.

Properties Suppliers
AquaTreat-9002-M

AquaTreat-9002-M is an alkalinity builder. It also contains organic dispersants and antifoam. AquaTreat-9002-M is used for imparting alkalinity to boiler water or for correcting the pH of low alkalinity waters. AquaTreat-9002-M is applied to maintain the boiler water alkalinity within limits to be established by WEX, to suit the operating conditions. AquaTreat-9002-M Reduces acid corrosion, Stabilizes protective films, Provides alkalinity control, Reduces foaming.

Properties Suppliers
AquaTreat-9065

AquaTreat-9065 is a specially designed dispersant for the prevention of scaling in boilers and in boiler feed lines. It causes calcium and magnesium hardness salts to form a light, mobile floc, easily removed by blow down. AquaTreat-9065 is normally used with asn oxygen scavenger and a phosphate. AquaTreat-9065 is normally maintained at concentrations between 100 and 500 mg/l, in the boiler water. AquaTreat-9065 is not corrosive to steel mixing tanks or dosage pumps, in concentrated or dilute form.

Properties Suppliers
Aquablend-310

Aquablend-310 is used to remove the last traces of dissolved oxygen from boiler feed water. It is a liquid formulation of catalyzed sodium sulphite. It reacts with oxygen to produce sodium sulphates.

Properties Suppliers

12345...18