chemical-categories

sodium lignosulphonate CAS NO: 8061-51-6

 Sodium lignosulphonate used In the field of concrete additives, the sodium lignosulphonate series products can be applied as common water reducing admixture and built material of series multifunction high-performance water reducing admixtures. The products can be directly adopted as additive in the concrete .Moreover, they also can be compounded with such high-performance water reducing admixtures as naphthalene series and melamine series etc. And, they are also ideal materials for series retardingagents and pumping agents etc.

vicky

sodium lignosulphonate HS CODE: 38040090

Sodium Lignosulphonate in Ceramic for ceramic products, can reduce the carbon content to increase green strength and reduce the amount of plastic clay, mud flows and good to improve the yield 70-90%, sintering speed reduction from 70 minutes to 40 minutes.

hydroxypropyl methylcellulose Technical 99%

sodium ligno sulphonate hs code:380400090

Sodium Lignosulphonate ( lignosulfonate ) water reducer are mainly for concrete mixture as water-reducing additive. Low dosage , low air content , water reducing rate is high ,adapt to most kind of cement. Can confected as concrete early-age strength enhancer , concrete retarder , antifreeze , pumping aids etc. Nearly no precipitate product in the liquor additive which is made from The sodium lignosulphonate and Naphthalin-Group High-Efficiency Water Reducer .The sodium Lignosulphonate is fit for apply to building project, dam project, thruway project etc.

sodium ligno sulphonate powder Technical 95%

Main performance

1. Can be applied as common water reducing admixture and built material of series multifunction high-performance water reducing admixtures.

2. Can be adopted as the adhesives in the briquetting procedure in the vertical retort zinc smelters.

3. Can be used as embryo reinforcing agents in the fields of pottery and porcelain and refractory materials. They can increase the fluidity of the slurry and thus to improve the strength of the embryo. 

4.In the field of water-coal paste, the sodium lignosulphonate series products can be adopted as the main compound materials.

5.In agriculture, the sodium lignosulphonate series products can be applied as the dispersant agents of pesticides and pelleting adhesives of fertilizers and feedstuffs.

Sodium Naphthalene Sulphonate Formaldehyde(SNF

SODIUM NAPHTHALENE SULFONATE-SNF

mainly used in concrete construction, so that not only the workability and hydration but also the strength and quality of concrete can be improved. When it is the first time to use this product or the concrete kind is changed, ratio need to be tested according to the material used in the construction, so that the best ratio can be found.

vicky

sodium Lignosulphonate ceramic binder(bond of refractory)

sodium Lignosulphonate is a kind of natural anionic surface active agent processed with sulfurous acid pulping waste through advanced production technology. It can work well with other chemicals and produce early strength agent, slow setting agent, antifreeze and pumping agent . It is widely used in various concrete projects such preformed concrete, reinforced concrete and prestressed concrete, especially applicable for commercial concrete, anti-freezing concrete, waterproof concrete, bulk concrete, pumping concrete, with high economic benefit.

Sodium Naphthalene Formaldehyde,Naphthalene Superplasticizer

Sodium naphthalene Sulphonate produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps.

vicky

sodium lignosulphonate ceramic binder(bond of refractory)

Sodium Lignosulphonate in Ceramic for ceramic products, can reduce the carbon content to increase green strength and reduce the amount of plastic clay, mud flows and good to improve the yield 70-90%, sintering speed reduction from 70 minutes to 40 minutes.

vicky
Mobile: 0086-18162818098 (what's app is ok)
wechat: Lignosulphonate
skype: missorange29

email: yongchemical@yahoo.com

Sodium naphthalene sulfonate(superplasticizer SNF FDN PNS powder)

 Sodium Naphthalene Sulphonate Formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%. 
Sodium Naphthalene Sulphonate Formaldehyde Direction 
Prepare solutions as required. 
Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%). 
The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds

best wishes,Judy chen