Cleaning chemicals manufacturers | cleaning chemical suppliers | cleaning chemicals, solvents,products

chemical-categories

Qceine

Sterile Qceine is a complete and reliable disinfectant programme. Qceine is specifically designed to be a complimentary rotational alternative to proceine and again provides a broad spectrum of activity, ideal for cleanrooms and pharmacies. 0.2 micron filtered and gamma irradiated sterile, complete with supporting documentation and visible detex marking.

Properties
RD 531

A silicate-free, heavy-duty detergent for use in soak and ultrasonic cleaning systems. It is safe on ferrous and non-ferrous metals, although it may attack some aluminum alloys. RE 531 is excellent for removal of buffing and lapping compounds. It may also be used for removal of general machine oils.

Properties Suppliers
Rustec

A liquid mixture with phosphoric acid, detergents and metal corrosion inhibitors for use in all departments. Excellent for removing protein, hard water scale and other salt contaminants.

Properties
SDG #1

SDG #1 is an extremely effective proprietary liquid cleaner/degreaser designed for a broad range of applications with special emphasis on offshore rig/platform clean­ing and harbor maintenance. SDG #1 will not harm painted surfaces, and it is safe to use on any surface not harmed by water. SDG #1 is biodegradable, non-toxic, non-caustic, nonflammable, and leaves no residue after rinsing. SDG #1 is recom­mended for use for extreme cleaning conditions, (oil based muds, dried grease, tars, etc.). Because of is higher pH SDG #1 is an eye and skin irritant and proper eye and skin protection should be worn when using this product. SDG #1 is a concentrated cleaner that should be diluted with water for best clean­ing results.

Properties
SDG #5

SDG #5 is an extremely effective proprietary liquid cleaner/degreaser designed for a broad range of applications with special emphasis on synthetic oil muds found on offshore rig/platform cleaning. SDG #5 will not harm painted surfaces, and it is safe to use on any surface not harmed by water. SDG #5 is biodegradable, non-toxic, non-caustic, nonflammable, and leaves no residue after rinsing. SDG #5 is recommended for use for extreme cleaning conditions, (oil based muds, synthetic oil muds, dried grease, tars, etc.). Because of is higher pH SDG #5 is an eye and skin irritant and proper eye and skin protection should be worn when using this product.

Properties Suppliers
Teepol

Teepol is a concentrated industrial/institutional cleaner and wetting agent. It is used across a wide spectrum of industries such as food processing, hospitality, transportation, health care and processing industries.

Properties Suppliers
Viking

Viking is used for the control of certain weeds in pineapples,sugar cane and non-crop situations. A heavy duty alkaline mixture containing caustic soda, chelating agents (to remove rust and other metal oxides) and rinse aids for fast efficient cleaning. Acceptable for use in federally inspected meat and poultry plants for use in soak tanks or in mechanical cleaning equipment. A thorough rinse with potable water is required after use.

Properties Suppliers
X-Puma

X-Puma is a non-foaming detergent component of Birko’s unique, multi-product AlloTresT.M. cleaning system. Suitable for CIP and batch applications requiring low foam and a variety of other applications.

Properties
AC-700M

AC-700M is a biodegradable cleaner for heat transfer systems, hot oil units, glycol dehydration systems and cooling systems (radiators). AC-700M is a concentrated, slightly acidic pH solution specially formulated to remove rust, mineral scale and corrosion by products from most heat transfer systems. AC-700M is safe to use in cleaning multi-metal systems containing carbon steel, copper and aluminum. AC-700M is formulated to be diluted from 1: 4 to 1: 10 depending on the application.

Properties Suppliers
AP 1000

AP 1000 is recommended for use as a sanitizer for food processing equipment at 200-400 ppm active quaternary without potable water rinse. It is formulated to disinfect hard, nonporous, inanimate environmental surfaces. It is an effective sanitizer when diluted in water up to 650 ppm hardness.

Properties Suppliers

1...45678...68
www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X