Buy construction chemicals | construction industry chemicals | construction chemicals manufacturers

chemical-categories

Calcium Sulfate Dihydrate

Calcium sulfate dihydrate is the calcium salt of sulphuric acid. It is used as analytical reagent, also used in water treatment, papermaking, printing, dyeing, metallurgy and coating, adhesive production.

Properties Suppliers
Calcium Thiocyanate

Calcium thiocyanate is mainly used in pesticide, medicine, electroplating, textile, photography and construction industries.

Properties Suppliers
CarboCond

CarboBond is especially suitable for the kind of adhesive application where electrical conductivity is of primary importance.

Properties Suppliers
Cationic Asphalt Emulsion CQS-1h

Cationic Asphalt Emulsion CQS-1h is a cationic asphalt emulsion designed for use in slurry seals. The slurry seal process mixes the emulsion, aggregate and additives in a specially designed machine, which also places the mixture. The cationic emulsion is a chemically stabilized system, so care should be taken not to upset the chemical balance with contamination by chemicals, over-exposure to air, or adverse mechanical or thermal conditions.

Properties Suppliers
Cebex 100

Cebex 100 is a powder admixture. The material is a combination of a plasticising agent and a gas producing expansion medium. The plasticising agent allows the use of a reduced water/cement ratio with consequent increased strengths and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion. It gives high grout fluidity with low water/cement ratio, thus making placement or injection of the grout easy.

Properties Suppliers
Cebex FCC422

Cebex FCC422 is a plasticised expanding grout additive. The material is a combination of a plasticising agent, and a gas producing expansive medium, with suitable fillers; which generates gas during the hydration process before the initial set takes place, counteracts the natural settlement and shrinkage of the grout. Stability and cohesion of grout are greatly increased. The selected fillers used ensure uniform mixing. Expansion is controlled to avoid excess pressure built up but sufficient pressure is developed to provide complete contact of the grout with the bearing surfaces, without voids.

Properties Suppliers
Cemax 300

Cemax 300 is aqueous solution of dispersing agent for use as a grinding aid and pack set inhibitor for the production of portland and blended cements. It is a alkanolamine-dihydroxy chemical based material. The features are it provides a reduction in ball and liner coating which results in grinding efficiency, a reduction in agglomeration which increases classifier throughput, increase in cement strength and further it provides reduction in grinding cost.

Properties Suppliers
Cemax 360

Cemax 360 is specially developed additive for improving early strength and grinding efficiency, also fluidity for cement. It is a alkanolamine chemical based material. The features are it provides a reduction in paste grinding which results in grinding efficiency improvement, an increase in cement flowability, an increase in cement early strength and further a reduction in grinding cost.

Properties Suppliers
Cemax 441

Cemax 441 is an additive with a composition of grinding aid, pack set inhibitor, set accelerating and strength improving liquid dispersing chemical for the production of portland and other hydraulic cements. The main advantages of Cemax 441 are its ability to increase both grinding efficiency and cement strength by reduced cement agglomeration and balls and liners coating for better grinding efficiency, increase in cement early and late strength, increase in cement mill output by more than 10% at the same cement fineness and further increased cement flow ability and reduced pack set of cements.

Properties Suppliers
Cement Additives

Cement Additives are used during and after the drilling function, when casing strings need to be cemented into the well bore. The cement must adhere to the casing as well as the formation. A host of additives are available that modify slurry properties to allow service companies to design a slurry for each individual well, which can be put in place to provide the necessary bonding. Various kind of cement additives include additives for water reduction, saving on cement klinger, beneficiation of lime stone etc.

Properties Suppliers