Buy construction chemicals | construction industry chemicals | construction chemicals manufacturers

chemical-categories

COREPLAST AEA

COREPLAST AEA is air entraining agent for high-slump concrete. COREPLAST AEA improves the workability of the concrete avoiding bleeding & segregation and increases resistance to deicing salt.

Properties Suppliers
COREPLAST AWA

COREPLAST AWA is anti wash out admixture with water-reducing capability. COREPLAST AWA used to reduce wash out for concreting under-water conditions.

Properties Suppliers
COREPLAST RP1

COREPLAST RP1 is water reducing admixture used for retardation in hot weather, cement saving with increased slump without loss of strength.

Properties Suppliers
COREPLAST SP1

COREPLAST SP1 is a super plasticiser based on Naphthalene formaldehyde. COREPLAST SP1 is very high workability and strength with cement saving without loss in strength.

Properties Suppliers
COREPLAST SP2

COREPLAST SP2 is high range water reducer for high cement content concrete. COREPLAST SP2 is used for high workability, delays in transportation, self compactibility, and improved workability. COREPLAST SP2 highly recommended for readymix concrete transportation.

Properties Suppliers
COREPLAST SP3

COREPLAST SP3 is high early strength superplasticiser with combination of Naphthalene+melamine. COREPLAST SP3 is used for extremely high plasticizing effect at lower W/C ratio suitable for ready mix concrete, precast industries.

Properties Suppliers
COREPLAST SPM

COREPLAST SPM is melamine based superplasticiser with excellent water reduction. COREPLAST SPM is used for extremely high plasticising effect in the manufacture of coloured tiles, mosaic tiles, designer wall and floor tiles etc.

Properties Suppliers
Conbextra GP2

Conbextra GP2 is a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100 mm. It is a blend of portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout. Its high ultimate strength ensure the durability of the hardened grout and further the free flow ensures high level of contact with load bearing area.

Properties Suppliers
ConcCare HSPA

ConcCare HSPA is high Range Super Plasticizer, is used for precast applications where the requirement is to produce quick strength gaining concrete, extremely durable concrete with ultra high mechanical properties, extremely low permeability and extremely high resistance to chemical and physical attack.

Properties Suppliers
Hi-Flow Grout

Hi-Flow Grout is specially designed for use where high tolerance, high strength and high fluidity are required. It is formulated as a natural aggregate system with a shrinkage-compensating binder and is highly flow able without sacrificing strength or performance capabilities.

Properties Suppliers

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X