Make your products visible globally with Elite Membership.
I agree to the terms and conditions
Existing User?
Sign In with Email
Remember Me Forgot Password?
New User?
Enter your registered Email ID to get reset password.
Elite Member
Individual Register
Sika Formol-EX is a chemical release agent for use on both timber and steel moulds. It is designed and formulated to function as a bondbreaker between formwork or moulds and freshly placed concrete. Sika Formol-EX offers protection to both steel and timber formwork as it acts as a rust inhibitor and waterproofer.Sika Formol-EX can be used with excellent effect on formwork designed to produce all types of finishes, from fair-faced to texture. It has been found to assist in the protection of equipment used in the handling and placing of concrete. A thin coating on bowls, barrows, skips, shovels, etc.
Sika Formol-WB is a ready-to-use, water-based mould release agent which is designed to provide easy release of formwork. It is based on a blend of refined oils, specially formulated for their high quality surface finish and stability.Sika Formol-WB when applied to steel, plastic and timber formwork allows clean, fast and easy striking.
TRIOBAN PC NXZ is a blend of mineral oil with fatty acid esters.This product will minimize foaming commonly encountered in the production and application of mortars, adhesives and plasters. TRIOBAN PC NXZ is very effective in removing entrapped air in building products when the air content must be minimized. This is especially important for cement or anhydrite gypsum-based self-leveling compounds, which require a smooth surface appearance.
ZacroSeal C222 sealer is a VOC free penetrating and non film-forming sealer developed using fluoropolymer technology. ZacroSeal C222 sealer is formulated to provide high water repellency to concrete. This sealer penetrates deep inside the concrete providing excellent water and stain resistance. It works by forming thin fluoropolymer resin film on substrate pores and penetrating deep into substrate.
ZacroSeal Gold is an improved performance penetrating and non film-forming sealer. ZacroSeal Gold sealer penetrates deep inside the stone providing water and stain resistance. Active ingredients are developed and manufactured in Germany and consist of silane and siloxane. After application, ZacroSeal Gold works by forming thin silicone resin film on substrate pores and penetrating deep into substrate.
top-granoflour is a natural raw material. It is prepared, processed and further refined using the very sophisticated methods.
ARI PLAST 100 R is a liquid retarding plasticizer. It disperses instantly in the mixing water and form a film on the cement particles. It is a highly effective set retarder.ARI PLAST 100 R improves concrete workability,retards concrete setting.It is dosed in the mixing water which is then added into the mix subsequently.
Acronal S 430 P is a redispersible polymer powder which is mainly used to modify hydraulic binders such as cement, lime and gypsum, and to manufacture flexible coatings. It is based on an aqueous, anionic dispersion of a copolymer of an acrylic ester and styrene, free of plasticizers. It can be used to reduce the elastic modulus of mortars and increase their elongation at break, their abrasion resistance and their adhesion. It provides a large increase in flexibility, even at temperatures below 0 °C. It can also be used to improve the properties of adhesive sealants.
Acronal S 631 P is a redispersible polymer powder which is mainly used to modify inorganic binders such as cement, lime and gypsum. It is a copolymer of butyl acrylate and styrene in powder form. It can be used in stiffer repair mortar and adhesive mortar formulations. It enhances the strength, abrasion resistance and adhesion of mortars in cases in which the drying rate is too high for the inoganic binder to cure quickly enough. Even if sufficient moisture is available, adding Acronal S 631 P has the advantage that it increases the flexibility of the cured compound and improves its adhesion to difficult substrates, even if it is exposed to moisture.
Betec Flex S150 is a flexible two-part polymer-modified cementitious waterproofing system. The two-components of Betec Flex S150 are mixed together with a slow speed drill and paddle to form a smooth slurry. The slurry is applied by trowel or brush, in two coats, to form a hard but flexible waterproof cementitious coating. It provides excellent adhesion to concrete, masonry, ceramics and most common substrates.
Stay updated with the latest chemical industry trends and innovations.
Verification Code has been sent to
Please enter the Verification Code below to verify your Email Address.If you cannot see the email from "noreply@worldofchemicals.com" in your inbox,make sure to check your SPAM Folder