Buy construction chemicals | construction industry chemicals | construction chemicals manufacturers

chemical-categories

Mycron - 6055

Mycron - 6055 is a polymeric emulsions for cements & non cementus coating.

Properties Suppliers
Nappar Fluids

Nappar fluids are high-volatility solvent used in industrial adhesive formulations in place of toluene.Recommended for replacement of aromatic-containing solvents,Lower odor than corresponding aromatic solvents.

Properties Suppliers
Nitocote CM650

Nitocote CM650 is designed to coat concrete or masonry structures with a thin layer of a cementitious decorative and waterproofing coating, applicable by brush, roller or spray, giving a concrete-like appearance. It covers concrete imperfections such as cracks, pores, roughness, voids or other defects in the concrete surface. It seals the walls and ceilings of concrete or mortar as well as shrinkage cracks.

Properties Suppliers
Nitoproof 600

Nitoproof 600 is a single component pitch modified polyurethane which cures by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane. It is a medium viscosity grade for roller, squeegee or spray application to horizontal and vertical surfaces. It is highly elastic, cures to give a permanently flexible resilient barrier over a wide range of temperatures. It provides excellent adhesion and can be applied to a wide range of substrates and further its continuous adhesion prevents lateral migration of water.

Properties Suppliers
Nucell 100

Nucell 100 is closed cell polyethylene joint filler for use as expansion joint filler in blockwork and concrete where readily compressible low load transfer joint filler is required.

Properties Suppliers
Nucell 1000

Nucell 1000 is a compressible, non-extruding bitumen impregnated fibre board suitable for forming structural expansion joints in concrete structures.

Properties Suppliers
Nucell 200

Nucell 200 is closed cell polyethylene joint filler for use as expansion joint filler in blockwork and concrete where readily compressible low load transfer joint filler is required.

Properties Suppliers
Nucell 50

Nucell 50 is a closed cell polyethylene foam joint back-up cord for use in expansion joints where a back-up material is required to provide support for a joint sealant.

Properties Suppliers
Nucell 500

Nucell 500 is a high performance cross linked polyethylene expansion joint filler specifically designed to be used in water retaining and water excluding structures subjected to hydrostatic pressures.

Properties Suppliers