Buy cooling tower water treatment chemicals, cooling water treatment chemicals manufacturers, suppliers

chemical-categories

Nasco CW 147

Nasco CW 147 is used to control scale and corrosion formation in open recirculating cooling system.

Properties Suppliers
Organic Tower Treat 5141

Excellent to penetrate and break up biomasses in fouled cooling tower waters. Good slug feed additive (at 1:3,000) prior to the addition of chlorine or high doses of our biocides in increase the effectiveness of chlorine \ biocide. 1:3,000 yields 40 ppm dimethyl amide of fatty acid detergent dispersant.

Properties Suppliers
PT AQUA 31001

PT AQUA 31001 is a non ionioc Ter Polymer based scale & corrosion inhibitor.It is suited for high Iron & high TSS.PT AQUA 31001 help corrosion inhibition by controlling film formation of the organic corrosion inhibitors on metal surfaces.Our product will enhance the dispersancy by providing steric repulsion between particles.PT AQUA 31001 has a out standing dispersion for hydrarted iron oxide hydroxy apatite and calcium carbonate.Also excellent stabilizer for corrosion inhibitor such as phosphate, phosphonate and zinc.

Properties Suppliers
PT AQUA 5000

PT AQUA 5000 nitrate borate based inhibitor.PT AQUA 5000 controls corrosion in closed heating and cooling systems and both ferrous and non-ferrous.This product does not affect pump glands, rubber hose, water seals and valve packing.PT AQUA 5000 can insures good heat transfer and reduces maintenance and operating costs.

Properties Suppliers
PT AQUA 5002

PT AQUA 5002 nitrite based inhibitor, which can controls corrosion of both ferrous and non-ferrous metals.Our product also acts as buffering agent automatically adjusts pH at the preferred level and does not contain chromate,insures good heat transfer and reduces maintenance and operating costs.

Properties Suppliers
PT AQUA 5140

PT AQUA 5140 is a zinc based corrosion Inhibitor for higher pH.In this product, zinc is coupled with phosphate which provides excellent cathode protection to both steel and brass metallurgy.PT AQUA 5140 provides zinc Phosphate as the main corrosion inhibitor.Our product is stable at alkaline pH conditions.This product contains LMW polymer which prevents deposition of suspended solids.

Properties Suppliers
PT AQUA 5142

PT AQUA 5142 Molybdate based corrosion inhibitor, keep corrosion free system under high chloride stress conditions.It provides HPA as the main corrosion inhibitor.PT AQUA 5142 stable at alkaline pH conditions and contains LMW polymer which prevents deposition of suspended solids.This is the single product treatment for Chloride and Sulphate corrosion.

Properties Suppliers
PT AQUA 5210

PT AQUA 5210 is used for low & medium hardness and TDS. Our product is stable in Chlorinated Water. PT AQUA 5210 contains no heavy metals.Best feature of this product is, control of calcium phosphate is achieved without the need of pre-treatment.

Properties Suppliers
PT AQUA 5211

PT AQUA 5211 is zinc based scale and corrosion inhibitor, and it is suitable waters with high hardness & high TDS. It is stable in chlorinated water.It doesn't contain heavy metals.control of calcium phosphate is achieved without the need for costly pre-treatment.

Properties Suppliers
PT AQUA 5214

PT AQUA 5214 is a non zinc based, scale & corrosion inhibitor for cooling water chillers.It is suitable for high hardness & high TDS and stable in chlorinated water. PT AQUA 5214 prevents the formation of Calcium Phosphate.This product compliments Corrosion and Biological control.

Properties Suppliers

1...7891011...15