Buy corrosion inhibitors, rust inhibitors, corrosion inhibitor manufacturers, suppliers

chemical-categories

Bis(hexamethylene)triamine penta(methylenephosphonic acid)

Bis(hexamethylene)triamine penta(methylenephosphonic acid) is a high-efficient chelating scale inhibitor, it has good effect to carbonate and sulfate scale.It has good water soluble properties and heat tolerance.It has high calcium ion tolerance in a wide pH ranges and temperature.

Properties Suppliers
C-613

C-613 is a specially formulated corrosion inhibitor for use in Glycol dehydration systems. C-613 incorporates an effective corrosion inhibitor system with a pH buffering additive that maintains the pH of the glycol system at 7-9 thus minimizing corrosion from acid gases such as H2S and CO2. C-613 is normally added to the glycol system based on laboratory titration data.

Properties Suppliers
CHEMIKA C78

CHEMIKA C78 is a blend of two volatile amines of high distribution ratios, specially formulated to inhibit condensate corrosion caused by oxygen and carbon dioxide.

Properties Suppliers
Chemtreat 568

Chemtreat 568 is a clear liquid formulated for one shot boiler scale and corrosion inhibition. It disperses readily in water and it inhibits scale formation and maintains heat transfer surfaces clean. It inhibits corrosion of all surfaces in contact with boiler water.

Properties Suppliers
Chemtreat 574

Chemtreat 574 is a nitrite base corrosion inhibitor formulated for protection of ferrous and non-ferrous metals in closed circuit heating and cooling water circuits. It reduces corrosion rates to less that 0.1 mil per year and is compatible with alcohol and glycol based antifreeze's and brine solutions. It is mildly alkaline thus generating correct alkalinity without additional chemicals and is safe to use in hot water systems where temperatures do not exceed 110°C.

Properties Suppliers
Copolymer of Phosphates and Acrylic Acid

PPCA is a kind of modified polyacrylic acid and dispersing antiscale with low phosphate. It shows certain corrosion inhibition effects. When built with zinc salt, inorganic phosphates, it shows obvious synergy. Its nice compatibility performance makes it one of the major agents in built formula.

Properties Suppliers
Cyclohexylamine Benzoate

Cyclohexylamine Benzoate is used as pharmaceutical intermediate,volatile corrosion Inhibitor.

Properties Suppliers
Dicyclohexylamine Benzoate

Dicyclohexylamine Benzoate is used as pharmaceutical intermediate and volatile corrosion inhibitor.

Properties Suppliers
Ethoduomeen T/25

Ethoduomeen T/25 is used as Corrosion inhibitor,Dispersing agent,Emulsifier.

Properties Suppliers
Ethylene Diamine Tetra (Methylene Phosphonic Acid) Sodium

EDTMPS is nitrogenous organic polyphosphonic acid, a part of cathodic corrosion inhibitor.Its corrosion inhibition is 3~5 times better than that of inorganic polyphosphate. It can be used as corrosion inhibitor in circulating cool water system and boiler water.

Properties Suppliers

12345...10