Drilling Fluids are added provide controlled pressure cooling lubrication

chemical-categories

SR-LIG

SR-LIG is a naturally occurring material used to reduce fluid loss and deflocculates water base mud. SR-LIG is a partially soluble additive which provides thin, low permeability filter cakes. It is an excellent emulsifier for oil in water emulsions as wells a secondary deflocculated and is especially effective in high temperature applicatios.It performs exceptionally well in dispersed system as a synergistic additive with lignosulphonates.It can be used in virtually any water base fluid. Lignite powder may be use for rheology and filtration control in all water base muds.It is especially effective at stabilizing the properties of muds exposed to high temperature and contamination such as CO2 and calcium. SR-LIG is especially effective when treating cement contamination. It reduces the high viscosity and pH of cement contamination muds and reacts with calcium to lessen the contaminating effects. Normal treatment of SR-LIG range from 2.87 to 22.7 kg/m3.Due to their low pH, it’s treatment require additional caustic soda or an alternative alkaline material to maintain a consistent pH. A normal ratio is 1 sack of caustic soda for every 4sachs of SR-LIG. In high salinity systems. it is preferable to premix the SR-LIG in medium pH fresh water to enhance dispersibility then add the premix to the active system. It is most effective in mud systems with an alkaline pH in the range of 8 to 10.

Properties Suppliers
SR-MOLDSIN

SR-MOLDSIN is a polymer for core drilling, water well drilling, oil and seismic shot hole drilling. Lower solids drilling fluids based on polymer viscosifiers have been successfully used for many years, and their effectiveness in increasing drilling rates are well documented. SR-MOLDSIN effectively reduces the API filtration rate of many water-based oil and gas drilling fluids and may also be used to increase and stabilize viscosity to improve hole cleaning and suspension properties in a wide variety of fluid environments. Because ti is effective at low concentrations, It’s regular provides a cost-effective means of improving drilling fluid performance. In many drilling operations XC polymer are normally used to viscosify drilling fluids applied for drilling section between 500/1000 m – 2500/3000m. However expensive XC polymers are not required, as long as drilling is not carried out in horizontal holes or in pay zones where thixotropic drilling fluids are preferred.

Properties Suppliers
SR-RXL

SR-RXL is a fine black powder with brown tinge. It is a water soluble, thermally stable synthetic lignite derivative used to achieve filtration control and rheological stability over a wide range of temperature. It can tolerate wide range of soluble contamination. It is additive for all water base drilling fluids with chlorides below 60000 mg/L and hardness not exceeding,3500mg/L. Resinex lignite is formed by the reaction of sulphonated lignite and water soluble resin. It is resin lignite will reduce high temperature fluid loss and stabilize the muds at down hole stability. SR-RXL filtration agent should be used at concentration of 2 to 6 lb/bbl for fluid loss control.to achive optimum solubility the pH should be adjusted above 9.5. Higher density fluid will require greater concentrations of SR-RXL additive. For increase bottomhole temperatures use larger concentrations depending on drilling conditions.

Properties Suppliers
SR-THINNER

SR-THINNER is a high performance synthetic polymer in liquid form.It is an environmentally compatible,high performance,multipurpose mud conditioner for rheology control in water based muds.SR-THINNER is a new gencration mud conditioner developed from the liquid polymeric deflocculant for fresh and salt water muds,especially at elevated temperatures of 450 ‘F and above.Primary application is in fresh and brackish water muds of low to intermediate density.Special feature of SR-THINNER is its excellent tolerance of salt, calcium and other contaminants.In environmentally sensitive areas, SR-THINNER simplifies waste water treatment and reduces compliance costs because it is essentially non polluting in the low concentration.The product does not contain chromium or other metal salts.further it is free sulphite origninby products common in converntional mud thinners and deflocculants.

Properties Suppliers
SR-TORQUE REDUCER

SR-TORQUE REDUCER is a proprietary blend of natural oils and surfactants in a non-toxi base.The product is a free flowing liuid, and is biodegradable,non-toxi,and does not fluoresce.SR-TORQUE REDUCER should be use in water base muds whenever torque,drage or excessive bit gauge wear are encountered.This product can be used in all water base mud systems, is calcium tolerant and exhibition additional properties such as emulsification and wetting.SR-TORQUE REDUCER will not affect the performance or characteristics of the drilling fluid system beging used in addition this excellent product will not provid a sheen on water because it contains no aromatics.This non-flurorescing characteristic is very important because it means that SR-TORQUE REDUCER will not adversely down hole well logging operations. SR-TORQUE REDUCER is stable at high temperature.SR-TORQUE REDUCER is typically loaded at a concentration of approximately 0.279% by volume of the mud system under most condition. However, concentration of up to 2.1% by volume may necessary depending on the severity of the problem encountered.The higher concentrations may be used without adverse consequences if warranted by extreme conditions.

Properties Suppliers
Sodium Silicate

Being engaged in delighting our customers, we present a vast collection of Neutral Sodium Silicate. As a distinguished Manufacturer, Supplier and Exporter, our collection consists of different varieties. The product on offer ensures the unsurpassed quality. It stays in high demand among our customers down to its optimum composition, purity and long shelf life. Our valued customers can avail it from us at an affordable price.

Properties Suppliers
Therminol RD

Therminol RD is a low viscosity heat transfer fluid particularly recommended for indirect heating at medium temperatures up to 270°C. Therminol RD is used in resin manufacturing, fatty acid deodorizing/extruding, waste heat recovery.

Properties Suppliers