Buy Electronic chemicals | Electronic coating chemicals | Electronic chemicals manufacturers

chemical-categories

Ruthenium

Ruthenium is a rare transition metal belonging to the platinum group of the periodic table. The Russian scientist Karl Ernst Claus discovered the element in 1844 and named it after Ruthenia, the Latin word for Rus'. It is used for wear-resistant electrical contacts and the production of thick-film resistors. A minor application of ruthenium is its use in some platinum alloys. It is a versatile catalyst. It was also suggested as a possible material for microelectronics because its use is compatible with semiconductor processing techniques.

Properties Suppliers
Tellurium

Tellurium is a metalloid which looks similar to tin. It is chemically related to selenium and sulfur. It was discovered in Transylvania in 1782 by Franz-Joseph Müller von Reichenstein in a mineral containing gold and tellurium. Martin Heinrich Klaproth named the new element in 1798 after the Latin word for "earth", tellus. It is primarily used in alloys, foremost in steel and copper to improve machinability. Applications in solar panels and as a semiconductor material also consume a considerable fraction of tellurium production. It is also used to color ceramics. The strong increase in optical refraction upon the addition of selenides and tellurides into glass is used in the production of glass fibers for telecommunications. These chalcogenide glasses are widely used. Rubber can be vulcanized with tellurium instead of sulfur or selenium. The rubber produced in this way shows improved heat resistance.

Properties Suppliers
Luminostar

Luminostar is a trichromatic bulbs and tubes, which use phosphors precursors ,which have a longer life providing significant energy savings, compared to incandescent lamps.

Properties Suppliers
Mesitylene

Mesitylene is an aromatic hydrocarbon with three methyl substituents attached to the benzene ring. It is prepared by distillation of acetone with sulfuric acid or by trimerization of propyne in sulfuric acid, which, in both cases, acts as a catalyst and dehydrating agent. It is commonly used as a solvent in research and industry. In the electronics industry, mesitylene has also been used as a developer for photopatternable silicones due to its solvent properties. It is also a major urban volatile organic compound which results from combustion. It plays a significant role in aerosol and tropospheric ozone formation as well as other reactions in atmospheric chemistry.

Properties Suppliers
ABRON -S 10

ABRON-S 10 is polyamic acid of pyromellitic dianhydride and diaminodiphenyl ether. It is a polyimide precursor used in the manufacture insulation films. ABRON-S 10 can also be used for enameling rectangular & circular copper and aluminum wires. It is also used to manufacture porous polyimides.

Properties Suppliers
Mineral Oil

Mineral Oil is a liquid by-product of the distillation of petroleum to produce gasoline and other petroleum based products from crude oil.It is a transparent, colorless oil composed mainly of alkanes (typically 15 to 40 carbons) and cyclic paraffins, related to petroleum jelly.Mineral oil is a common ingredient in baby lotions, cold creams, ointments and cosmetics,used to remove un-shed skin on reptiles such as lizards and snakes.It is also used as a non-conductive coolant or thermal fluid in electric components,as a lubricant in enema preparations,used on cooking utensils or to grease cookware and bakeware to prevent food from sticking.

Properties Suppliers
Polyaniline

Polyaniline is a conducting polymer of the semi-flexible rod polymer.It is usually found folded with other polymers.Polyaniline comes in a granular form which can be mixed with an organic chemical and painted or sprayed onto a substance to form a smooth layer of polyaniline. It can also be molded into various shapes.It is made by polymerizing aniline molecules through a chemical reaction with a substance such as hydrochloric acid.It is used in antistatics, charge dissipation or electrostatic dispersive coatings and blends, electromagnetic interference shielding ,anti-corrosive coatings, hole injection layers,transparent conductors, ITO replacements, actuators, chemical vapor and solution based sensors, electrochromic coatings.

Properties Suppliers
Polysulfide

Polysulfide formulations offer corrosion protection, superior electrical insulation and good flowability. These elastomeric compounds are 100% reactive and are designed to cure at ambient temperatures or at slightly elevated temperatures.polysulfides are versatile synthetic elastomers that are used in the electronic, electrical, computer, metalworking, appliance, automotive and chemical industries. They can be used in a wide range of applications.

Properties Suppliers
SASOLWAX H1

SASOLWAX H1 is a medium melting point Fischer-Tropsch wax.It is available in flaked and pellet form .It is mostly used by intermediate companies who do wax grinding. SASOLWAX H1 micronised ground form applied effectively in all areas where Sasolwax Spray 30, Sasolwax Spray 40 and Sasolwax H1N4 are used.It is used as a viscosity regulator, melting point elevator in wax blends, lubricant and release agent in moulding and extrusion of plastic, insulating component in the cable,electrical industry and chewing gum base, in manufacture of carbon paper backing, crayons.

Properties Suppliers
nitric acid

Nitric acid is commonly used as a strong oxidizing agent. The main use of nitric acid is for the production of fertilizers. Other important uses include etching and dissolution of metals, especially as a component of aqua regia for the purification and extraction of gold, and in chemical synthesis. It has been used in various forms as the oxidizer in liquid-fueled rockets.

Suppliers

1...45678...25
www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X