Buy fine chemicals | fine chemical manufacturers | fine chemicals suppliers

chemical-categories

Thulium Oxide Purified 99.9%

Thulium oxide is white powder with slightly green color, which turns into red with lustre after heating and it turns into yellowish white again if longer heating. It is rare earth oxide. It is insoluble in water, but dissolve in strong acid slowly. Tm3O3 absorb CO2 and H2O in air to form subcarbonate salts.

Thulium Oxide

CAS No.:12036-44-1 EINECS No.:234-851-6 Molecular Formula: Tm2O3 Molecular Weight:385.87
Density:8.5 Melting Point:2341℃ Boiling Point:3945℃  

Applications

Thulium(III) oxide mainly applies to make portable X-ray transmission device. It acts as control material in reactor.

Thulium trioxide is raw material for X-ray luminescent materials, garnet laser material, rare earth glass laser material and magnetic bubble.

Suppliers
Yttrium Oxide Purified 99.9%

Yttrium oxide is white to light yellow powder, which is a kind of rare earth oxides. It is insoluble in dilute acid, however nearly insoluble in water.

Yttrium Oxide

CAS No.:1314-36-9 EINECS No.:215-233-5 Molecular Formula:Y2O3 Molecular Weight:225.81
Melting Point:2439℃ Boiling Point:4300℃ Density:5.03 Flash Point:12℃

Applications

Yttrium(III) oxide granule can apply to thermal spray. For this application, it process into spherical large particle to get great flow ability. It should guarantee the whiteness too. Normally the production method is granulation.

Yttrium trioxide is important material for magnetic material for microwave and military project, which is also for optical glass. It can improve the refractive index of special glass and reduce dispersion index. So it is raw material for high brightness fluorescent powder for large-screen television and coating of other kinescope.

Yttria apply to produce thin film capacitor , special refractory material, high pressure mercury lamp, laser, memory parts and other magnetic bubble material. It is also for artificial laser crystal and superconductive material.

Yttrium(III) oxide powder is additive for lanthanum series glass and high temperature resistance and rediation resistance optical glass. It is also important additive for silicon nitride engineering ceramics, zirconium dioxide engineering ceramics, piezoelectric ceramics, photoelectric ceramics, semiconductor ceramics, thermistor ceramics, capacitor ceramics and other functional ceramics.

Yttria powder mainly apply to prepare new magnetic material yttrium iron garnet and solid laser material yttrium aluminum garnet (YAG). It is also a kind of hydrogen storage material.

Suppliers
phosphomolybdic acid A.C.S.

Appearance (Colour)

Yellow

Appearance (Form)

Crystalline compound

Solubility (Turbidity) 10% aq. solution

Clear

Solubility (Colour) 10% aq. solution

Yellow

Insoluble matter

max. 0.01%

Chloride (CI)

max. 0.02%

 

Suppliers
phosphotungstic acid A.C.S.

Appearance (Colour)

White OR yellowish green

Appearance (Form)

Crystalline powder

Loss on ignition

max. 16%

Chloride (CI)

max. 0.001%

Sulphate (SO4)

max. 0.005%

 

Suppliers
2,5-Di-Tert-Butylhydroquinone

2,5-Di-Tert-Butylhydroquinone is used in construction and industry.

Properties Suppliers
5-Acetoxymethyl-2-Furaldehyde

5-Acetoxymethyl-2-Furaldehyde is spontaneously flammable in air,when comes in contact with water liberates extremely flammable gases.It is used as intermediate in pharma and food industry. It is used in food industry for reduction of off-taste of vinegar.

Properties Suppliers
6- Phenylhexyltrichlorosilane

6- Phenylhexyltrichlorosilane is used in pharmaceutical and fine chemical industry.

Properties
Lithium Sulfide LAB GRADE 99%

Lithium Sulfide

 

Lithium Sulfide is white to yellow crystals, which have smell of sulfur. It is typical sulfide of lithium. It is stable at home temperature and pressure, however react with water sharply. Li2S tend to absorb moisture in air and oxidize. When heating to 200℃, Li2S react with iodine and form lithium iodide. It react with carbon in electric-arc furnace and form lithium carbide. Lithium metal and pure sulfur are the raw materials.

Lithium Sulfide

CAS No.:12136-58-2 EINECS No.:235-228-1 Molecular Formula: Li2S Molecular Weight: 45.95
Melting Point: 900℃ Density: 1.66 UN 2923 8/PG 2  

Applications

Dilithium sulfide is mainly for lithium sulfur battery, which is potential electrolyte material for rechargeable lithium ion battery.

 

Suppliers
Lutetium Oxide Purified 99.9%

Lutetium oxide is white powder, which is rare earth oxide. It is insoluble in water and aqueous alkali, but soluble in inorganic acid except HF salts and H3PO4 salts. Lu2O3 is stable at room temperature and pressure. It absorb carbon dioxide and moist in air to form subcarbonate.

Lutetium Oxide

CAS No.:12032-20-1 EINECS No.:234-764-3 Molecular Formula:Lu2O3 Molecular Weight:397.93
Density:9.41 Melting Point:2487℃ Boiling Point:3980℃ UN 3264 8/PG 3

Applications

Lutetium(III) oxide mainly uses as additive element for yttrium iron and yttrium aluminum garnet, which also acts as active material for fluorescent powder. It is raw material for making special alloys.

Lutetium trioxide is additive for magnetic material and fluorescent powder, which applies to activation analysis of neutron. It is sensitizer of cathode material.

Suppliers
Vanadium dioxide Purified 99%

vanadium dioxide M phase 1um phase change oxide material

smart glass resistance to infrared ray

99% VO2

vanadium(IV) oxide

Suppliers

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X