chemical-categories

PT AQUA 4326

PT AQUA 4326 Polyacrylamide based Anionic High Molecular Weight non toxic flocculant. PT AQUA 4326 good floc formation & rapid settling.This product is suitable for efficient removal of colloidal silica,improved clarity in filtrate, sizeable reduction in organics.PT AQUA 4326 is an easy to prepare solution, effective at low dosages and completely miscible with water.

PT AQUA 4427

PT AQUA 4427 Polyacrylamide based Anionic High Molecular Weight non toxic Flocculant. Our product indicated for reduction of alum dosage in precipitation of coloured and colloidal matter, inorganic coagulant dosage, increased clarifier throughput, sludge production, overall treatment cost.

PT AQUA 4435

PT AQUA 4435 Polyacrylamide based Cationic High Molecular Weight Flocculant 25% cationic charge. Our product is an easy to prepare solution, effective at low dosages and completely miscible with water. PT AQUA 4435 has a good floc formation & Rapid Settling, efficient removal of colloidal silica and improved clarity in filtrate. sizeable reduction in organics.

PT AQUA 4496

PT AQUA 4496 Polyacrylamide based Cationic High Molecular Weight Flocculant 45% cationic charge. PT AQUA 4496 has a good floc formation & rapid Settling, efficient removal of colloidal silica, improved clarity in filtrate and sizeable reduction in organics. PT AQUA 4496 is an easy to prepare solution, effective at low dosages and completely miscible with water.

PT AQUA 4905

PT AQUA 4905 Non Ionic Flocculant with 2% Anionic nature.It is suitable for reduction of over flow solids, high Mud densities. PT AQUA 4905 is having characteristics of high settling rates high rate decanters, increased clarifier throughput, bigger floc formation.

PT AQUA 4920

PT AQUA 4920 Non Ionic Flocculant, which is indicated for reduction of over flow solids, high Mud densities.PT AQUA 4920 has a high settling rates high rate decanters, increased clarifier throughput and bigger floc formation.

Poly Ferric Sulfate

Poly Ferric Sulfate is a popular inorganic polymer flocculant. It is a poly-hydroxy, polycaryon cation abio-marcomolecule flocculating agent.It has strong flocculation, stable chemical nature, and high settling velocity. It can be used widely in purification of domestic sewage and industrial wastewater from electronic, paper-making, printing and dyeing, electroplating and food industry. It is a safe reliable clarificant.

Polyacrylamide Technical 100%

These products can irritate the eyes and skin. Rubber gloves, goggles and protective clothing are recommended for use while handling. They are not acutely toxic by oral and dermal administration to laboratory animals though eye irritation did result. See the Material Safety Data Sheet for complete safety, health and environmental data. 

Polyaluminium Chloride Technical 28

Properties: This product is yellow or light yellow, dark brown, dark gray resin solid, and has strong function of bridging adsorption. During the process of hydrolysis, accompanying physical and chemical processes such as condensation, adsorption, precipitation and so on. The net water effect is obvious and non corrosive for the pipeline equipment. It can effectively support the water chromatophilic substance like SS, COD, BOD and arsenic, mercury and other heavy metal ions.

Usage: Widely used for drinking water, industrial water and wastewater treatment.

Method of Use: The solid product is dissolved into liquid according to 1:3, then add 10-30 times of water to dilute the required concentration.( Dosage based on different turbidity of raw water, measuring the optimum dosage. When the raw water turbidity in 100-500mg/L, thousand tons of meal dosage is 10-20kg.)

Packing: 25kg plastic woven bag lined with polyethylene liner or the packing made accordingly.

Polyelectrolyte

Polyelectrolytes are polymers whose repeating units bear an electrolyte group. Polyelectrolyte properties are thus similar to both electrolytes and polymers, and are sometimes called polysalts. Polyelectrolytes are classified into weak polyelectrolyte and strong polyelectrolyte. A 'strong' polyelectrolyte is one which dissociates completely in solution for most reasonable pH values. Weak polyelectrolytes are not fully charged in solution, and moreover their fractional charge can be modified by changing the solution pH, counterion concentration, or ionic strength. Polyelectrolytes which bear both cationic and anionic repeat groups are called polyampholytes. Polyelectrolytes are highly versatile products which enhance the performance of a wide range of industrial applications and essential processes right from water purification, oil recovery, colour removal, paper making, mineral processing and a host of other uses. Polyelectrolytes are both flocculants as well as de­flocculants depending upon the molecular weight.