Buy Fuel Lubricants | Fuel additives manufacturers | Lubricant additives manufacturers | Gasoline Additives

chemical-categories

NA-SUL DTA

NA-SUL DTA is a stable, ashless, oil soluble, water insoluble rust and corrosion inhibitor displaying good demulsibility.

Properties Suppliers
NA-SUL EDS

NA-SUL EDS is an ashless rust and corrosion inhibitor used in a wide variety of fuels and lubricants.In fuels it imparts antistatic and deicing properties. It is also used as a rust inhibitor for upper cylinder lubricants and greases.

Properties Suppliers
NyoGel 744

NyoGel 744 is a soft, silica thickened, light viscosity, synthetic hydrocarbon grease intended for instruments with sliding surfaces and small gear trains. Benefits include good water resistance.

Properties Suppliers
NyoGel 774

NyoGel 774 is a silica thickened, medium viscosity, synthetic hydrocarbon grease intended for mechanical components requiring a light amount of damping.

Properties Suppliers
NyoGel 779

NyoGel 779 is a silica thickened, light viscosity, synthetic hydrocarbon grease intended for mechanical components that require a light level of damping. Used to reduce free motion and to quiet operating noise of loosely-fitting components.

Properties Suppliers
NyoGel 788

NyoGel 788 is a rust inhibited. A mildly thixotropic, silica thickened, heavy viscosity, synthetic hydrocarbon grease intended for worm drives, open gears or unsealed gear boxes where gear oils cannot be used. Benefits include high film strength over a wide temperature range.

Properties Suppliers
Nyogel 788

Nyogel 788 is a base oil.It is mild thixotrophic,silica thickened,hydrocarbon grease.                        

Properties Suppliers
Aderco 2050

Aderco 2050 is an extremely concentrated surfactant/dispersant for use in residual and distillate fuels. Product developed primarily for large fuel consumers. The scope of this product is to homogenize the fuel, clean and protect the operation, maximize the energy potential, minimize emissions and solve fuel related problems, before, during and after combustion. Aderco 2050 is supported by letters of non-objection from major engine manufacturers and used by major industries around the world.

Properties Suppliers
Aderco 5000

Aderco 5000 is a surfactant/dispersant for use in all types of residual or distillate fuels. This product was developed especially for smaller fuel consumers. The low dosage makes it easy to handle and very convenient for fuel tanks of 5000 litres or less. The scope of this product is to homogenize the fuel, clean and protect the operation, maximize the energy potential, minimize emissions and solve fuel related problems, before, during and after combustion.

Properties Suppliers
Aderco HF8K

Aderco HF8K is a unique combustion improver. Not only does this product enable to reduce excess air without generating black smoke, but it also cleans the entire operation while homogenising the fuel and dispersing asphaltenes for a better and more complete combustion. This product is a balanced blend aimed to maximize industrial boiler performance and meet environmental regulations.

Properties Suppliers

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X