Make your products visible globally with Elite Membership.
I agree to the terms and conditions
Existing User?
Sign In with Email
Remember Me Forgot Password?
New User?
Enter your registered Email ID to get reset password.
Elite Member
Individual Register
SPI 2402H a solvent additive specifically formulated for workovers and stimulations of production and injector wells where asphaltene and paraffin deposits are a problem. SPI 2402H is a concentrated blend of organic solvents, penetrants, and dispersants for prevention and dissolution of asphaltene and paraffin deposits. SPI 2402H is used for a variety of applications where these troublesome deposits cause plugging and reduced production.It is most effective in areas where asphaltene precipitation is a problem and provides long-lasting results. The product performs especially well in heavy oil with a high asphaltene content. SPI 2402H was specifically designed to eliminate or to reduce asphaltene and paraffin deposition problems.
nil
EnProve TR is a highly effective sorbent used for the removal of SO2, SO3, HCl and HF in coal fired electric utility plants, industrial plants, waste incinerators and ethanol plants. Trona is the sorbent of choice in a dry injection system that features low capital investment and quick retrofit to any existing flue gas configuration.
Inhibex 301 is a copolymer of vinyl caprolactam and N,N-diethylaminoethylmethacrylate in butyl cellosolve. It offers gas hydrate inhibition along with the added benefit of corrosion inhibition properties. At a dose rate of 0.6 wt.%, it performs well in the presence of condensate at 10.5°C sub cooling in autoclave cells containing green canyon gas.
Inhibex 501 is designed for cloud points above 50°C. It exhibits a cloud point at 72°C well above other gas hydrate inhibitors. In many injection applications, cloudiness is acceptable while the critical temperature is the precipitation temperature of the polymer. It offers a precipitation temperature of 98°C in fresh water and a 45°C precipitation in brine.
Inhibex 505 is a high-performance kinetic hydrate inhibitor with high temperature and high salt tolerance. The properties are it has excellent sub cooling performance at low dosage rates and it does not precipitate out at 100°C up to 10% brine.
Bellasol S16 is cost effective management, general purpose antiscalant for non serve formations of CaCO3, CaSO4 and BaSO4.
Bellasol S28 scale inhibitor is strong CaCO3 performance, increases squeeze lifetime.
Bellasol S30 is an excellent performance in serve scaling situations and controls against CaSO4 and CaCO3. Bellasol S30 is thermally and hydrolytically stable.
Bellasol S50 highly effective against many scales including BaSO4, Ca3 (PO4)2, CaSO4, SrSO4 and CaCO3 even in high TDS and low pH. Bellasol S50 is having superior crystal growth inhibition properties compared with phosphonates.
Stay updated with the latest chemical industry trends and innovations.
Verification Code has been sent to
Please enter the Verification Code below to verify your Email Address.If you cannot see the email from "noreply@worldofchemicals.com" in your inbox,make sure to check your SPAM Folder