Heat Transfer Fluids are thermal stabilizers oxidative stabilizers fluids

chemical-categories

Dynalene HT

Dynalene HT is a high temperature heat transfer fluid that exhibits one of the highest boiling, flash, and fire points compared to other commercially available heat transfer fluids. Additionally it exhibits low vapor pressures and is nearly non-toxic and odorless, allowing for safe use of the product in non-pressurized systems. Dynalene HT is noncorrosive and very stable where temperatures exceed the thermal stress limitations of most competitive fluids.

Properties Suppliers
Dynalene LC

Dynalene LC is an inhibited glycol coolant for fuel cells and electronics cooling. Dynalene LC maintains a very low electrical conductivity and offers users a stable and efficient product for applications where freeze protection is needed. Dynalene LC can offer excellent thermo-physical properties while protecting your system from corrosion and degradation for years.Dynalene LC is primarily used for cooling PEM fuel cells and electronics. It helps your system maintain the highest efficiency by an ion suppression mechanism eliminates the need for de-ionizing filters, reducing the weight, size, and cost of your system, and additionally enhancing coolant performance. Dynalene LC is non-toxic, non-hazardous, non-flammable and is produced with renewable materials.

Properties Suppliers
Dynalene MT

Dynalene MT offers the process industry a versatile,practically nontoxic heat transfer fluid proven to be cost effective and thermally stable at temperatures up to 350°C. Dynalene MT has demonstrated excellent performance over a wide range of temperatures without compromising system reliability or integrity - important factors in choosing a fluid with confidence for long-term use.

Properties Suppliers
Dynalene MV

Dynalene MV heat transfer fluid extends low-end operating ranges far beyond the boundaries of most competitive brands. Dynalene MV is chosen for its thermal stability, environmental performance, biodegradability, and cost effectiveness in many critical applications.

Properties Suppliers
Dynalene PG

Dynalene PG is an inhibited non-toxic propylene glycol heat transfer fluid which offers users a stable, safe, and efficient product for applications where freeze protection is needed. Properly used and maintained, Dynalene PG offers excellent thermo physical properties all while protecting your system from corrosion and degradation for years. Dynalene PG utilizes a unique corrosion inhibitor package, which is made from non-toxic raw materials. It offers superior corrosion protection for most metals including carbon steel, brass, copper, stainless steel, cast iron, and many other alloys by creating a passive layer on the surface that contacts the Dynalene PG and prevents corrosion from forming. It also stabilizes the pH of the fluid keeping it in the rage that is suitable for the metals in your system.

Properties Suppliers
HYDRO-GUARD

HYDRO-GUARD system provides maximum shale stabilization in highly reactive clays, with proven high performance in many drilling environments including deepwater. HYDRO-GUARD system has shown to perform equal or similar to synthetic based fluids on several parameters, including clay inhibition, lubricity, and hole stability. HYDRO-GUARD water-based fluid offers several environmental and safety advantages over oil- and synthetic-based fluids, making it ideal for use in environmentally sensitive areas.

Properties
Duratherm HF

Duratherm HF heat transfer fluid satisfies the needs of industry and insurance officials who recommend operating systems at temperatures below the heat transfer fluid’s flash point. Duratherm HF heat transfer oil delivers superior resistance to sludging, a problem plaguing most other fluids. Duratherm HF heat transfer oil is environmentally friendly, non-toxic, non-hazardous and non-reportable. It poses no ill effect to worker safety and does not require special handling.

Properties
Dynalene 600

Dynalene 600 is a silicone based heat transfer fluid with exceptional thermal stability and resistance to oxidation. It is engineered to maintain consistently high thermo-physical properties in the most hostile high temperature applications such as open fluid baths and process heating and cooling applications.

Properties Suppliers
Dynalene TEG

Dynalene TEG is an inhibited 60 vol% triethylene glycol heat transfer fluid which offers users a stable, safe, and efficient product for applications where freeze protection is needed. Dynalene TEG has a much higher thermal stability than propylene and ethylene glycol and can safely be used up to 204°C. Dynalene TEG utilizes a unique corrosion inhibitor package that offers superior corrosion protection for most metals including carbon steel, brass, copper, stainless steel, cast iron, and many other alloys by creating a passive layer on the surface that contacts the Dynalene TEG and prevents corrosion from forming. It also stabilizes the pH of the fluid keeping it in the range that is suitable for the metals in your system.

Properties
Paratherm HR

Paratherm HR is an alkylated-aromatic based heat transfer fluid formulated for closed loop liquid phase heating to 650°F in fired heaters and 675°F in waste heat recovery and full convection heaters. Paratherm HR offers greater thermal stability than competitive aromatic based fluids that cover similar temperature ranges.

Properties Suppliers

12345...6
www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X