Buy Industrial Chemicals | Industrial Chemicals Manufacturers | Industrial Chemical Suppliers - Worldofchemicals

chemical-categories

Complex Sodium Di-Silicate

Whiteness (Wr)% ≥85.0

Bulk Densityg/cm3,  0.3—0.9

Moisture ≤5.0%

PH Value (20℃,1% Solution )≤12.5

SiO2   ≥20%

Content of SiO2%+ Na2O% ≥ 50

Water Insolubles % ≤1.5

Calcium Ion Exchange Capacity (CaCO3) mg/g ≥400

Bulk Density can be adjusted as per cleints' request.

Packing

1)In strong bags of 650kg with tight plastic lining. 13mt/20FCL,26mt/40FCL

2)In strong bag of 25kg net each with lining plastic bag inside, then 40 bags on pallet(or 1000kg bag.) 13mt/20FCL,26mt/40FCL

Properties Suppliers
Converge Polyol 212-10

Converge Polyol 212-10 in DBE Solution is a 1000 molecular weight polymer produced from propylene oxide and carbon dioxide blended with dibasic ester. Converge polyol 212-10 is an amorphous, linear, aliphatic polycarbonate diol. Carbon dioxide accounts for approximately 40% of the polyol mass. Converge polyol 212-10 in DBE is a viscosity optimized blend for a variety of polyurethane systems. It can be used in the preparation of adhesives, foams, coatings, elastomers and TPUs.The aliphatic polycarbonate backbone delivers unique high performance to polyurethanes in terms of both strength and environmental resistance. In adhesive applications, it provides improved adhesive & cohesive strength and hydrolytic stability. In coatings, it delivers UV resistance and high hardness.It substantially increases the load bearing, tensile, and tear strength of flexible foams. Converge polyol 212-10 can also improve abrasion resistance.Converge polyol 212-10 in DBE can be utilized in existing urethane systems. The optimized blend allows for flowability at ambient conditions.It has excellent compatibility with polyester polyols and isocyanates. Compatibility with polyether polyols is low to moderate; it is recommended that polyether-based systems are cured shortly after polyol blending.Converge polyol 212-10 in DBE is compatible with standard chain extenders, surfactants, and catalysts.

Properties Suppliers
Converge Polyol 212-20

Converge Polyol 212-20 is a 2000 molecular weight polymer produced from propylene oxide and carbon dioxide. It is an amorphous, linear, aliphatic polycarbonate diol. Carbon dioxide accounts for approximately 40% of the polyol mass.Converge polyol 212-20 is a solvent-free, high viscosity building block for a variety of polyurethane systems. It can be used in the preparation of adhesives, foams, coatings, elastomers and TPUs.In coatings, it delivers UV resistance and high hardness. It substantially increases the load bearing, tensile, and tear strength of flexible foams. Converge polyol 212-20 can be blended into existing urethane systems. Converge polyol 212-20 is compatible with all standard chain extenders, surfactants, and catalysts.

Properties Suppliers
Converge Polyol FF-1

Converge polyol FF-1 is a blend optimized for viscosity and hydroxyl number. Carbon dioxide accounts for approximately 13% of the polyol mass. Converge polyol FF-1 is an optimized blend primarily for use in polyether based flexible slabstock foam. Converge polyol FF-1 can be utilized in typical polyurethane formulations as the sole polyol. Converge polyol FF -1 is compatible with standard chain extenders, surfactants, and catalysts. CO2 solubility in FF-1 is higher than standard polyols and has been used successfully as a blowing agent.

Properties Suppliers
Converge Polyol HMA-1

Converge Polyol HMA-1 is a 1000 molecular weight blend optimized for viscosity and hydroxyl number. Carbon dioxide accounts for approximately 30% of the polyol mass. Converge HMA -1 is an optimized blend primarily for use in Hot Melt Adhesive formulations.t may also have benefits in coatings, elastomers, and other applications where low viscosity and flowability are important.Converge HMA-1 can be utilized in Hot Melt Adhesive formulations. Converge HMA-1 is compatible with standard chain extenders, surfactants, and catalysts.

Properties Suppliers
Converge Polyol HMA-2

Converge Polyol HMA-2 is a 1800 molecular weight blend optimized for viscosity and hydroxyl number. Carbon dioxide accounts for approximately 30% of the polyol mass. Converge Polyol HMA-2 is an optimized blend primarily for use in Hot Melt Adhesive formulations. It may also have benefits in coatings, elastomers, and other applications where low viscosity and flowability are important.Converge HMA-2 can be utilized in Hot Melt Adhesive formulations. Converge Polyol HMA-2 is compatible with standard chain extenders, surfactants, and catalysts.

Properties Suppliers
Converge Polyol RF-1

Converge polyol RF-1 is a blend optimized for viscosity and hydroxyl number utilizing Converge polyol 212-10. Carbon dioxide accounts for approximately 10% of the polyol mass. Converge polyol RF-1 is an optimized blend primarily for use in rigid polyisocyanurate and polyurethane formulations for boardstock, panels, and other rigid foam insulation. Converge polyol RF-1 can be utilized in polyisocyanurate and polyurethane formulations. It has excellent compatibility with polyester polyols and isocyanates.

Properties Suppliers
Cool-Rite

Cool-Rite provide outstanding sump life and tooling life and are extremely economical. The unique chemistries of these products provide superior heat dissipation resulting in improved tool life at economical dilutions.

Properties Suppliers
Copolymer of Maleic and Acrylic Acid (MA/AA) Technical 48.0 min

MA/AA is a low molecular weight polyelectrolyte, a copolymer of maleic anhydride and acrylic acid. It has good dispersant performance against carbonate and scale inhibition for phosphate. it has good thermal stability, can be used under high temperature (300℃). MA/AA has good compatibility when used together with other agents. MA/AA is widely used in low-pressure boiler, centralized heating, centralized air-conditioner and circulating cool system. It can also be used as chelating dispersants in woven and dyeing fields.

Properties Suppliers
Copper

Copper is a ductile metal, with very high thermal and electrical conductivity. It is used as a conductor of heat and electricity, a building material, and a constituent of various metal alloys. Copper compounds are commonly encountered as copper(II) salts, which often impart blue or green colors to minerals such as turquoise and have been widely used historically as pigments. Architectural structures built with copper corrode to give green verdigris. Decorative art prominently features copper, both by itself and as part of pigments. Copper(II) ions are water-soluble, where they function at low concentration as bacteriostatic substances, fungicides, and wood preservatives. In sufficient amounts, they are poisonous to higher organisms; at lower concentrations it is an essential trace nutrient to all higher plant and animal life. The main areas where copper is found in animals are tissues, liver, muscle and bone.

Properties Suppliers