Buy Industrial Chemicals | Industrial Chemicals Manufacturers | Industrial Chemical Suppliers - Worldofchemicals

chemical-categories

Isostearic Acid

Isostearic acid is a branched-chain fatty acid derived from vegetable oils or animal fats. It is used extensively in cosmetic and personal wash products where they provide good spreading, pleasant and non-tacky skinfeel, and excellent emolliency. It provides the hydrophobic portion of surface-active agents (Surfactants) which are used subsequently in the formulation of many consumer and industrial products. It has excellent solubility in a wide range of oils, and this property is exploited in its use as an emulsifier and dispersant. The superior lubricating properties of isostearic acid also find favour in applications where surface treatment or modification is desired. It is increasingly finding a role in industrial applications, where specific benefits are derived from its unique properties.

Properties Suppliers
Itaconic Acid

Itaconic acid is a naturally occurring organic compound. It is non-toxic, and readily biodegradable. The name itaconic was devised as an anagram of aconitic. It was obtained by the distillation of citric acid. It is produced industrially by fermentation of carbohydrates such as glucose using Aspergillus terreus. As such it is a fully sustainable industrial building block. It is primarily used as a co-monomer in the production of styrene-butadiene-acrylonitrile and acrylate latexes with applications in the paper and architectural coating industry.

Properties Suppliers
Jeffamine® D-230

Jeffamine® D-230 amine is a polyether diamine with low color, low viscosity, and moderate reactivity in epoxy curing. The polyether backbone gives cured resins with relatively high elongation and good toughness and thermal shock resistance. It can be blended with higher-viscosity curing agents to reduce viscosity, or with cycloaliphatics to improve the elongation of higher-Tg cured resins.

Properties Suppliers
Jeffamine® T-403

Jeffamine® T-403 is characterized by repeating oxypropylene units in the backbone. It is a trifunctional primary amine having an average molecular weight of approximately 440. Its amine groups are located on secondary carbon atoms at the ends of aliphatic polyether chains.

Properties Suppliers
Jones Reagent

Jones Reagent is a solution of chromium trioxide in diluted sulfuric acid that can be used safely for oxidations of organic substrates in acetone. It can also be prepared from sodium dichromate and potassium dichromate. Jones Reagent is especially suitable for the oxidation of secondary alcohols to ketones and of primary alcohols to carboxylic acids and in a few cases to aldehydes (Jones Oxidation).

Properties Suppliers
K-TAC A150

K-TAC A150 is an amorphous polypropylene of consistent properties. K-TAC A150 has excellent thermal and oxidative stability. It is commonly used in formulating sealants and hot melt adhesives. K-TAC A150 product is compatible with a wide range of polymers, elastomers, waxes, tackifiers and fillers. It should be processed at temperatures of 175-2000C. K-TAC S150 is available in 22.7 kg boxes. It has a minimum shelf life of 12 months.

Properties Suppliers
KELCO-CRETE Diutan Gum

KELCO-CRETE Diutan Gum is a high molecular weight gum produced by carefully controlled aerobic fermentation, developed specifically for use with gypsum and hydraulic cementitious materials and the newest class of super plasticizers. It enables formulators and designers to improve the performance of hardened materials by controlling flow, segregation, sedimentation and bleed. KELCO-CRETE Diutan Gum belongs to a class of rheology modifying agents possessing pseudoplastic behavior. It is used in products based on Portland cement, calcium aluminate cement, gypsum, fly ash, and various pozzolanic materials and is compatible with all commonly used admixtures including naphthalene, melamine and polycarboxylate acid super plasticizers.

Properties Suppliers