Buy Lab Chemicals Online From Manufacturers Suppliers Exporters - Worldofchemicals

chemical-categories

Indigo Carmine

Indigo carmine is a pH indicator. It is approved for use as a food colorant in the USA and the EU. It is also a redox indicator, turning yellow upon reduction. Another use is as a dissolved ozone indicator. It is also used as a dye in the manufacturing of capsules, and in obstetrics, Indigo carmine-based dye is used to detect amniotic fluid leaks.

Properties Suppliers
Indium Acetate Industrial Grade 99%

Indium acetate is white needle-like crystal powder, which is anhydrous and minor metal salt. It reacts with pyridine, quadrol, tetramethylammonium hydroxide and so on, which forms complex compounds. Indium hydroxide or indium metal is the raw material.

Indium Acetate

CAS No.:25114-58-3 Molecular Formula:C6H9InO6 Molecular Weight:291.96 Melting Point:280℃

 

Properties Suppliers
Indium Arsenide Industrial Grade 99.99%

Indium arsenide is minor metal compound semiconductor, which is available in granule, piece, ingot, powder, wafer and nanowire. It is odorless. InAs is insoluble in water. The synthesis of InAs is same as gallium arsenide. It need arsenic powder and indium powder raw material.

Indium Arsenide

Purity: 99.99%, 99.999%, 99.9999%

CAS No.:1303-11-3 EINECS No.:215-115-3 Molecular Formula:InAs Molecular Weight:189.74
Density:5.67 Melting Point:943℃ UN 1557 6.1/PG 3  

Applications

InAs uses as electronic material, optical material, catalyst and so on. It applies to hole components and diamagnetic components.

Properties Suppliers
Indium Chloride Industrial Grade 99%

Indium chloride is available with indium(III) chloride anhydrous and indium(III) chloride tetrahydrate, which are common indium salts. Indium(III) chloride anhydrous is white powder, which is soluble in water. Indium metal is the raw material. Indium(III) chloride tetrahydrate is white crystalline powder.When heating in air, it decompose to In2O3.

Indium Chloride

CAS No.:10025-82-8 EINECS No.:233-043-0 Molecular Formula:InCl3 Molecular Weight:221.18
Melting Point:586℃ Boiling Point:300℃ Flash Point:300℃ Density:3.46
CAS No.:22519-64-8 EINECS No.:233-043-0 Molecular Formula:InCl3.4H2O Molecular Weight:293.24
Melting Point:56 UN3260 8/PG 2    

Applications

Indium(III) chloride anhydrous is spectral purity reagent and high purity chemical reagent. Dilute indium trichloride solution spray on grass feed that is as growth promoter of fleece.

Properties Suppliers
Indium Fluoride Industrial Grade 99.99%

Indium fluroide is is white powder, which is minor metal fluoride. InF3 in 100g water dissolve with 0.04g. If reducing indium trifluoride, InF2 got, however it is easy to hydrolyze. There is also indium(III) fluoride trihydrate. Indium powder is the raw material.

Indium Fluoride

CAS No.:7783-52-0 EC No.:232-005-0 Molecular Formula: InF3 Molecualr Weight:171.82
Density:4.39 Melting Point:1170℃ Boiling Point:>1200℃  

Applications

Indium trifluoride is raw material for non-oxide glasses. It is also catalyst for the addition of trimethylsilyl cyanide (TMSCN) to aldehydes to form cyanohydrins.

Properties Suppliers
Indium Iodide Industrial Grade 99.9%

Indium iodide is yellow solid, which is an indium salt. Its fused salt is almost black. It is stable at room temperature and room pressure., which is also stable to water and acid. Indium and mercury iodide are the raw material. There is also another method, which need indium and indium triiodide as raw material. Indium triiodide is available too.

Indium Iodide

CAS No.:13966-94-4 EINECS No.:237-746-3 Molecular Formula:InI Molecular Weight:241.72
Melting Point:351℃ Boiling Point:715℃    

Applications

Indium(I) iodide use as laboratory reagent normally.

Properties Suppliers
Indium Metal Industrial Grade 99.995%

Indium metal covers a series of products as ingot, wire, foil, plate, sheet, granule, shot, bar and so on. It is soft and ductile. Indium is mainly raw material for low-melting alloy, bearing alloy, semiconductor and photoelectric.

Indium Metal

Purity:99.995%, 99.999%, 99.9999%, 99.99999%

CAS No.: 7440-74-6 EINECS No.: 231-180-0 Molecular Formula:In Molecular Weight:114.818
Melting Point:156.61℃ Boiling Point: 2060℃ Density:7.30  

Applications

Indium metal is mainly for production of ITO target that is for production of LCD and flat screen.

The wire is a kind of sealing material. its sizes are customizable according to requirements.  it is also a kind of welding material. To compress cost, it alloy with tin.

The foil is a kind of metal target that is for sputtering.

The powder is raw material for electroconduction slurry and dental filling.

Properties Suppliers
Indium Nitride Industrial Grade 99.9%

Indium nitride is dark gray powder, which is a new three group nitride material and stable under about 300℃. It is a kind of semiconductor with forbidden bandwidth 2.4eV and formation heat -17.6kJ/mol. It easily dissolve by acid and alkali. Indium(III) oxideis the raw material.

Indium Nitride

CAS No.:25617-98-5 EINECS No.:247-130-6 Molecular Weight:InN Molecular Weight:128.83
Melting Point:1200℃ Density:6.88    

Applications

Indium nitride film by metal organic chemical vapor deposition method owns photoluminescence properties. It get potential application in  photoelectronic parts of new high frequency tera hertz communication.

Properties Suppliers
Indium Phosphate Industrial Grade 99.9%

Indium phosphate is dark gray crystalline powder, which is a kind of indium salt. It loses crystalline water at 350℃ and forms indium pyrophsophate. However it turns out amorphous indium phosphate at 640℃. But it decompose at 1800℃. InPO4 tend to compound with alkali metals and forms  double salt. It is hard to dissolve in water. Indium hydroxide is the raw material

Indium Phosphate

CAS No.:14693-82-4 Molecular Formula:InPO4 Molecular Weight:209.79 Density:4.9
Melting Point:1600℃      

Applications

Indium phosphate is additive to special glass.

Properties Suppliers
Indium Telluride Industrial Grade 99.99%

Indium telluride is black or blue grey crystal, which is a semiconductor material and thermoelectric material as bismuth telluride. It has a cubic crystal structure and is available with ingot, lump, slug, piece, pellet, powder, rod, wafer, sputtering target. Indium(II) telluride is metastable up to 125℃ at one atmosphere pressure. It is stable in air, which is hard to dissolve in hydrochloric acid. In vacuum, it easily volatilize and vapor is table and does not  decompose. It has strong anisotropy and  metallic conductivity. When 10K, it turns to superconductor. Indium metal and tellurium are the raw material. Indium(III) telluride(In2Te3) is also available.

Indium Telluride

Molecular Formula:InTe

Molecular Weight:242.4

Applications

Indium(II) telluride has thermoelectric power.  It get prospect applications in semiconductor. In2Te3 crystal applies to make infrared detector.

Properties Suppliers